• Journal of Biosystems Engineering
• /
• 제28권4호
• /
• pp.361-368
• /
• 2003

This study was intended to investigate the temporal and spatial variabilities of dry matter, nitrogen content, chlorophyll of paddy rice and yield caused by different rates of nitrogen application. An experimental field was divided into 45 plots of 3.48 ${\times}$ 12 m in size and application rate of nitrogen varied from 0 to 235% with an increment of 25% based on the standard rate of N-P$_2$O$_{5}$-K$_2$O=12-8-8 kg/10a. The measurements were made 8 times every 9-10 days after the transplanting. About 60 days after the transplanting, there exhibited little variabilities in the dry matter caused by different rates of nitrogen application. After that. however, there showed large variabilities and the dry matter increased with the application rate. The nitrogen content of paddy also increased with the application rate but it was inconsistent. After the tillering period, the nitrogen content remained constant. In the early stage of the tillering period the nitrogen content decreased in spite of increase in the dry matter. However. after a certain period of time it increased with the dry matter. There were little variabilities of chlorophyll after the transplanting. However, the SPAD increased with application rate of nitrogen as the paddy grew. After the tillering period SPAD was not affected by the different rates. More yield was obtained at the plots where larger nitrogen content was measured.d.

• Applied Biological Chemistry
• /
• 제7권
• /
• pp.29-33
• /
• 1966

이 시험(試驗)은 쥐오줌의 energy value와 nitrogen content와의 관계(關係)를 연구(硏究)하기 위하여 행(行)하여졌다. 이 시험(試驗)을 위하여 ad lib.구(區)에 13 마리, 2 meals구(區)에 16 마리, 도합(都合) 29 마리의 쥐가 쓰였다. 오줌의 채집(採集)은 22 일간(日間)의 본시험기간중(本試驗期間中) 8 일(日)동안 행(行)하였다. 1 일(日) 2회(回) 채식(採食)시킨 쥐들이 훨씬 많은 (p<0.05) nitrogen 을 배설(排泄)했고 아울러 더 많은 energy를 배설(排泄)하였다. 쥐오줌의 energy concentration과 nitrogen content 사이에는 직선관계(直線關係)가 있어서 nitrogen 함량(含量)이 증가(增加)하면 energy의 배설량(排泄量)이 증가(增加)된다는 사실(事實)이 밝혀 졌다. urinary nitrogen(X, gm/100 ml)으로 부터 energy value (Y, kcal/100 ml)를 산출(算出)할 수있는 공식(公式)을 유도(誘導)했는데 다음의 식(式)은 일반적(一般的)으로 이 목적(目的)을 위하여 쓰여질 수 있는 것으로 본다. Y=8.924X+0.182 (Y=urinary energy, X=urinary N) 이러한 산출(算出)에 수반(隨伴)도는 표준오차(標準誤差)는 0.788 kcal이다. nitrogen content로부터 energy concentration을 산출(算出)하는데 따르는 오차(誤差)가 이렇게 적기 때문에 또 urinary energy의 함량(含量)이 GE, DE, ME, 섭취량(攝取量)에 비(比)해 적기 때문에 유사(類似)한 Diet를 공급(供給)하는 경우(境遇) 이 식(式)은 쥐오줌의 energy value를 산출(算出)하는데 쓰일 수 있을 것이다. 따라서 오줌의 energy value의 직접측정(直接測定)에 소요(所要)되는 많은 시간(時間)과 노력(努力)이 절약(節約)되는 것이다. 쥐오줌의 energy: nitrogen의 비(比)는 9.4(ad lib.구(區)) 내지(乃至) 8.6(2 meals 구(區))으로서 채식회수(採食回數)는 이 비율(比率)에 하등(何等)의 영향(影響)이 없음이 밝혀졌다.

• 한국수산과학회지
• /
• 제2권1호
• /
• pp.83-86
• /
• 1969

The present investigations were made with the purpose of elucidating the seasonal variation in total nitrogen content of Gelidium amansii. Monthly samples were collected from the sea near pusan, from August 1957 to June 1959. The results obtained have been summarized as follows: The maximum total nitrogen content of Gelidium amansii was observed during the months of January and February, and the minimum content was observed in June and July Thus the total nitrogen content of Gelidium amansii exhibited a considerable periodic change throughout the year. The recommended harvest time of Gelidium amansii with regard to total nitrogen content, is from May to October, but on the other hand the proper harvest time is from May to June, with respect to the season of spore-formation and its propagation.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.1528-1528
• /
• 2001

Ginseng cultivated in different country or growing condition has generally different components such as saponin and protein, and it relates to efficacy and action. Protein content assumes by nitrogen content in ginseng radix. Nitrogen content could be determined by chemical analysis such as kjeldahl or extraction methods. However, these methods require long analysis time and result environmental pollution and sample damage. In this work we investigated possibility of non-destructive determination of nitrogen content in ginseng radix using near-infrared spectroscopy. Ginseng radix, root of Panax ginseng C. A. Meyer, was studied. Total 120 samples were used in this study and it was consisted of 6 sample sets, 4, 5 and 6-year-old Korea ginseng and 7, 8 and 9-year-old China ginseng, respectively. Each sample set has 20 sample. Nigrogen content was measured by electronic analysis. NIR reflectance spectra were collected over the 1100 to 2500 nm spectral region with a InfraAlyzer 500C (Bran+Luebbe, Germany) equipped with a halogen lapmp and PbS detector and data were collected every 2 nm data point intervals. The calibration models were carried out by multiple linear regression (MLR) and partial least squares (PLS) analysis using IDAS and SESAME software. Result of electronic analysis, Korean ginseng were different mean value in nitrogen content of China ginseng. Ginseng tend to generally decrease the nitrogen content according as cultivation year is over 6 years. The MLR calibration model with 8 wavelengths using IDAS software accurately predicted nitrogen contents with correlation coefficient (R) and standard error of prediction of 0.985 and 0.855%, respectively. In case of SESAME software, the MLR calibration with 9 wavelength was selected the best calibration, R and SEP were 0.972 and 0.596%, respectively. The PLSR calibration model result in 0.969 of R and 0.630 of RMSEP. This study shows the NIR spectroscopy could be applied to determine the nitrogen content in ginseng radix with high accuracy.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.91-97
• /
• 2002

Variation of HAZ toughness of Ti-containing steel with nitrogen content was investigated and interpreted in terms of its microstructure and the amount of soluble nitrogen present. The amounts of Ti and Al combined in TiN and AlN, respectively, in HAZ at $1400^{\circ}C$ peak temperature were less than those in base plate; 55~88% in TiN and 21~28% in AlN, indicating the dissolution of nitrifies in HAZ. The calculated amounts of soluble nitrogen using the thermodynamic analysis showed a good agreement with the measured values in other experiment. Therefore, the analysis can be used to estimate the amount of soluble nitrogen in HAZ. Simulated HAZ toughness was influenced not only by its microstructure but also by the amount of soluble nitrogen present after the formation of BN during the cooling cycle of welding. It showed maximum value when the nitrogen content is in stoichiometric ratio with titanium content, showing that soluble nitrogen in HAZ is detrimental to its toughness.

• Journal of Nutrition and Health
• /
• 제12권4호
• /
• pp.25-27
• /
• 1979

The analysis of nail nitrogen content reflected recent nutritional status. Therefore, estimation of nail nitrogen content has been previously reported in a small group of neonates ana school children. Nail samples were obtained from 52 economically middle and 21 low classes. The contents of nitrogen in their fingernails were determinded by micro-Kjeldahl method. Mean nail nitrogen content was $133.1{\pm}8mg/g$ in the middle class which is significantly higher than that of the low class $122.1{\pm}8mg/g$. The nitrogen contents of nails obtained in summer were found by analysis of variance and student's t-test to he lower than those obtained in winter.

• Journal of Welding and Joining
• /
• 제20권3호
• /
• pp.116-121
• /
• 2002

For the accumulation of a fundamental knowledge about the behavior of glass solder during the joining of ceramics, the wettability of solder on silicon nitride have been measured by sessile drop method. $SiO_2-MgO-Al_2O_3$ g1ass solder and oxynitride glass solders were selected as examples while silicon nitride which were used as substrates. Contact angle of solder on silicon nitride didn't decrease with time at high nitrogen content in the solder, but low nitrogen content in solders have the time-dependent property. Reason which contact angle of low nitrogen content in solders decrease on silicon nitride was that diffusion of nitrogen take place between solder and silicon nitride.

• 한국초지조사료학회지
• /
• 제20권2호
• /
• pp.123-130
• /
• 2000

This study was carried out to examine the effects of animal manure on efficiency of the nitrogen utilization of silage corn (Zea mays L.) and soil fertility. The experiment was conducted on the field plot at Gongiam, Kwangju, Kyunggi-Do for 3 years, from 1996 to 1998, and arranged in split-plot design with three replications. The main plots were two kinds of composts such as swine manure fermented with sawdust (SMFWS) and swine manure fermented without sawdust (SMF). Subplots were the nitrogen fertilization rate (0, 100, 200, 300 and 400kgNhalyear). The nitrogen (N) yield increased as the nitrogen fertilization rate increased up to a rate of 300 kg Nha, but decreased at rate of 400 kg Nlha. Nitrogen yield in SMF treatments was higher than that of SMFWS treatments. But there were no significant differences between SMFWS and SMF treatments. Organic matter (OM) content of the soils in SMFWS was higher than that of SMF, &d was not significantly different between SMFWS and SMF treatments. OM content increased with increasing the nitrogen fertilization rate. Total nitrogen (TN) content of the soils increased as the nitrogen fertilization rate increased. No difference of TN content was found between SMFWS and SMF treatments. (Key words : Swine manure, Compost, Corn, Sawdust, Nutritive value)

• Journal of Biosystems Engineering
• /
• 제42권1호
• /
• pp.62-68
• /
• 2017

Purpose: The storage life of pearl millet-based, deep fried, ready-to-eat snacks, packaged in aluminum-laminated polyethylene having a thickness of $50{\mu}m$ (with and without nitrogen) was evaluated under storage conditions of $38{\pm}2^{\circ}C$ and 90% RH. Methods: The moisture content, free fatty acids (FFA), peroxide value, and crispness of the snack were evaluated throughout the storage period. The moisture content, FFA, and peroxide value increased with an increase in storage period, but the increase was less in packages flushed with nitrogen gas. The crispness decreased with an increase in the storage period, for snacks both with and without nitrogen packages. However, the decrease was less in nitrogen-flushed packages. FFA and peroxide values were strongly correlated with the moisture content of the snack. The storage life of the snack was found to be 60 and 45 days in packages with and without nitrogen respectively. Conclusions: The snack's predicted storage life, for snacks with and without nitrogen packages, was determined as 294 and 254 days respectively.

• Bulletin of the Korean Chemical Society
• /
• 제29권2호
• /
• pp.413-416
• /
• 2008

A synthesis route to ordered mesoporous carbons with controllable nitrogen content has been developed for high-performance EDLC electrodes. Nitrogen-doped ordered mesoporous carbons (denoted as NMC) were prepared by carbonizing a mixture of two different carbon sources within the mesoporous silica designated by KIT-6. Furfuryl alcohol was used as a primary carbon precursor, and melamine as a nitrogen dopant. This synthesis procedure gave cubic Ia3d mesoporous carbons containing nitrogen as much as 13%. The carbon exhibited a narrow pore size distribution centered at 3-4 nm with large pore volume (0.6-1 cm3 g-1) and high specific BET surface area (700-1000 m2 g-1). Electrochemical behaviors of the NMC samples with various N-contents were investigated by a two-electrode measurement system at aqueous solutions. At low current density, the NMC exhibited markedly increasing capacitance due to the increase in the nitrogen content. This result could be attributed to the enhanced surface affinity between carbon electrode and electrolyte ions due to the hydrophilic nitrogen functional groups. At high current density conditions, the NMC samples exhibited decreasing specific capacitance against the increase in the nitrogen content. The loss of the capacitance with the N-content may be explained by high electric resistance which causes a significant IR drop at high current densities. The present results indicate that the optimal nitrogen content is required for achieving high power and high energy density simultaneously.