• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.488-493
• /
• 2003

유기용매를 함유하는 염화니켈 수용액으로부터 Ni 미분말을 제조하였고 Ni 분말형성에 미치는 유기용매 첨가의 영향을 검토하였다. 모든 생성물들은 0.1~l.0 $\mu\textrm{m}$ 범위의 구형입자들이었고 입자들간의 응집은 관찰되지 않았다. 1-propanol이 40 vol% 첨가된 경우 분말의 입경감소와 균일성이 현저하였다. 이들 분말에 대한 평균입경과 비표면적은 각각 0.3 $\mu\textrm{m}$와 16.4 m$^2$/g이었다. 1-propanol의 첨가량이 증가함에 따라 hydrazine에 의한 환원반응시간은 감소하였고, 1-propanol이 40 vol%가 첨가된 경우 환원시간은 약 5분이었다. Ni 합성 분말은 32$0^{\circ}C$ 부근에서 산화되었고, 30$0^{\circ}C$ 부근에서의 중량 감소는 Ni(OH)$_2$의 탈수에 기인한 것이다.

• 한국분말재료학회지
• /
• 제24권3호
• /
• pp.242-247
• /
• 2017

In this study, the electroless nickel plating method has been investigated for the coating of Ni nanoparticles onto fine Al powder as promising energetic materials. The adsorption of nickel nanoparticles onto the surface of Al powders has been studied by varying various process parameters, namely, the amounts of reducing agent, complexing agent, and pH-controller. The size of nickel nanoparticles synthesized in the process has been optimized to approximately 200 nm and they have been adsorbed on the Al powder. TGA results clearly show that the temperature at which oxidation of Al mainly occurs is lowered as the amount of Ni nanoparticles on the Al surface increases. Furthermore, the Ni-plated Al powders prepared for all conditions show improved exothermic reaction due to the self-propagating high-temperature synthesis (SHS) between Ni and Al. Therefore, Al powders fully coated by Ni nanoparticles show the highest exothermic reactivity: this demonstrates the efficiency of Ni coating in improving the energetic properties of Al powders.

• 한국결정성장학회지
• /
• 제13권3호
• /
• pp.117-121
• /
• 2003

염화 니켈과 마그네슘 스테아린산 혼합 분말로부터 수소환원 공정에 의하여 니켈 분말을 제조하고 반응온도 및 마그네슘스테아린산의 첨가에 따른 분말의 특성을 검토하였다. 마그네슘 스테아린산을 함유한 경우 과도한 입자 성장의 억제로 인하여 입경 감소 효과가 있었다. 마그네슘 스테아린산의 함유량이 증가함에 따라 이에 따른 액상량의 증가로 인하여 입경 감소와 입자들간의 응집 정도에도 영향을 주었다.

• 한국결정성장학회지
• /
• 제13권3호
• /
• pp.139-144
• /
• 2003

유기용매로서 에탄올을 함유한 염화니켈 수용액으로부터 니켈 미분말을 제조하고 이들의 산화특성을 검토하였다. 에탄올을 함유한 염화니켈 수용액에서 히드라진의 환원반응은 반응온도에 크게 의존하였다. 히드라진에 의한 환원반응시간은 반응온도가 증가함에 따라 감소하였다. 반응온도를 제어함으로써 입경이 0.1 $\mu\textrm{m}$-1.0 $\mu\textrm{m}$ 범위를 갖는 구형 분말을 얻을 수 있었다. 또한, 반응온도가 증가함에 따라 입경은 다소 증가하였고 조대한 입자들의 존재로 인하여 넓은 입도 분포를 나타내었다. $60^{\circ}C$에서 합성된 니켈 분말의 평균 입경과 비표면적은 각각 0.3 $\mu\textrm{m}$와 31.8 $m^2$/g이었다. $300^{\circ}C$에서 니켈 분말의 중량감소는 $Ni(OH)_2$의 분해반응에 기인한 것이다. $200^{\circ}C$ 공기중에서 가열처리한 경우 내산화성은 합성 분말보다 현저하였다

• 한국결정성장학회지
• /
• 제27권5호
• /
• pp.268-273
• /
• 2017

In this study, nickel hydroxide crystalline powders were synthesized by continuous reaction in the taylor fluid flow using nickel chloride, nickel sulphate and sodium hydroxide as raw materials and compared with those prepared by a conventional batch type reaction. The crystallinity of nickel hydroxide prepared by the Taylor fluid flow reaction was higher than that of nickel hydroxide obtained by batch reaction. The particle size of nickel hydroxide decreased about 2.5 to 3.6 times, and the specific surface area was increased.

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2003년도 춘계총회 및 연구발표회 초록집
• /
• pp.165.2-165
• /
• 2003

• 한국표면공학회지
• /
• 제28권2호
• /
• pp.83-91
• /
• 1995

A new method for preparation of thin nickel foam for Ni-MH battery was investigated. In this method, fine graphite powders of $1\mu\textrm{m}$～$2\mu\textrm{m}$ diameter were pasted into pores of thin polyurethane foam film in order to supply electric conducting seeds for nickel deposition by electroless plating reaction. After electroless plating, remaining polyurethane foam was removed chemically by organic solvent treatment and graphite particles also removed by ultrasonic cleaning. Porosity of formed nickel foam was about 85% During electroplating, porosity of the nickel foam decreased less than 5% up to $30\mu\textrm{m}$ coating thickness. And then it was electroplated and heat-treated to improve mechanical strength and ductility. Finally, thin nickel foam for Ni electrode of Ni-MH battery with 80% porosity and $350\mu\textrm{m}$～X$400\mu\textrm{m}$ thickness was obtained.

• 한국분말재료학회지
• /
• 제18권6호
• /
• pp.496-501
• /
• 2011

In this study, the effect of milling time on the microstructure and phase transformation behaviors of Ni-12 wt.%B powders was investigated using vibratory ball milling process. X-ray diffraction patterns showed that the phase transformation of mixed Ni-B elemental powder occurred after 50 hours of milling, with a formation of nickel boride phases. Through the study of microstructures in mechanical alloying process, it was considered that ball milling strongly accelerates solid-state diffusions of the Ni and B atoms during mechanical alloying process. The results of X-ray photoelectron spectroscopy showed that most of B atoms in the powder were linked to Ni with a formation of nickel boride phases after 200 hours of milling. It was finally concluded that mechanical alloying using ball milling process is feasible to synthesize fine and uniform nickel boride powders.

• 한국분말재료학회지
• /
• 제23권3호
• /
• pp.247-253
• /
• 2016

In this study, solid solution heat treatment of consolidated nickel-based superalloy powders is carried out by hot isotactic pressing. The effects of the cooling rate of salt quenching, and air cooling on the microstructures and the mechanical properties of the specimens are analyzed. The specimen that is air cooled shows the formation of serrated grain boundaries due to their obstruction by the carbide particles. Moreover, the specimen that is salt quenched shows higher strength than the one that is air cooled due to the presence of fine and close-packed tertiary gamma prime phase. The tensile elongation at high temperatures improves due to the presence of grain boundary serrations in the specimen that is air cooled. On the contrary, the specimen that is salt quenched and consists of unserrated grain boundaries shows better creep properties than the air cooled specimen with the serrated grain boundaries, due to the negative creep phenomenon.

• 한국결정성장학회지
• /
• 제12권2호
• /
• pp.73-79
• /
• 2002

코발트, 니켈, 구리 그리고 귀금속분말에 적용할 수 있는 polyol법은 균질한 크기와 형상을 갖는 금속분말합성에 매우 효과적인 공정이다 이 때 polyol은 용매, 환원제 그리고 보호제의 역학을 한다 $AgNO_3$글 촉매제로 첨가하여 비균질계 핵생성 반응을 야기할 경우 서브마이크폰 크기(0.5$\mu$m)의 코발트 분말을 한성학 수 있었다. 또한 촉매제인 Ag 핵의 수출 변화시키므로써 코발트 분말의 입도를 제어할 수 있음을 확인하였다.