• Journal of the Korean Chemical Society
• /
• v.58 no.1
• /
• pp.9-16
• /
• 2014

In a borate buffer solution, the growth kinetics and the electronic properties of passive film on nickel were investigated, using the potentiodynamic method, chronoamperometry, and single- or multi-frequency electrochemical impedance spectroscopy. The oxide film formed during the passivation process of nickel has showed the electronic properties of p-type semiconductor, which follow from the Mott-Schottky equation. It was found out that the passive film ($Ni(OH)_2$) of Ni formed in the low electrode potential changes to NiO and NiO(OH) while the electrode potential increases.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.151-152
• /
• 2011

본 연구에서는 황산니켈, 아세트산니켈, 썰파민산니켈 등 니켈 염 종류에 따른 무전해 니켈 도금피막의 기계적 특성을 평가하고자 하였다. 동일한 두께로 도금피막을 형성하여 내절성 시험결과 황산니켈을 사용한 무전해 니켈 도금피막의 경우 97회, 아세트산니켈을 사용한 경우 259회, 썰파민산 니켈을 사용한 경우 467회의 굴곡 시험 후 도금 피막이 파괴되어 썰파민산니켈이 니켈염으로 사용될 경우 가장 우수한 피막을 나타내었다. 도금피막의 연신울 측정결과 니켈염으로 황산니켈을 사용할 경우 0.28%의 연신율을 나타내었고 아세트산니켈을 사용할 경우 0.32%의 연신율을 나타내었고 썰파민산니켈을 니켈염으로 사용한 결과 0.69%의 높은 연신율을 나타내었으며 개발한 도금액을 PCB 도금을 위한 Cu Pattern에 도금한 경우 Cu line에 선택적으로 도금이 가능하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 1998.05a
• /
• pp.19-20
• /
• 1998

• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.326-334
• /
• 2004

Deposit charateristics of Electroless nickel(EN) were investigated with various complexing agents. As expected, the deposition rate of nickel is increased with pH and that of Phosphorous is decreased with pH. The result of SEM investigation shows that the rough surface crystallization is appeared with pH. It is show that the surface resistance of EN deposit is decreased with pH at 85$^{\circ}C$.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.27 no.5
• /
• pp.375-382
• /
• 2007

Nondestructive testing (NDT) by using the electromagnetic methods are useful for detecting cracks on the surface and subsurface of the metal. However, when the material contains both ferromagnetic and paramagnetic materials, it is difficult for NDT to detect and analyze cracks using this method. In addition the existence of a partial ferromagnetic material can be incorrectly characterized as a crack in the several cases. On the other hand a large crack has sometimes been misunderstood as a partially magnetized region. Inconel 600 is an important material in atomic energy plant. A nickel film is coated when a crack a appears on an Inconel substrate. Cracks are difficult to detect on the combined material of an Inconel substrate with a nickel film, which are paramagnetic and ferromagnetic material respectively. In this paper, a scan type magnetic camera, which uses a complex induced current-magnetic flux leakage (CIC-MFL) method as a magnetic source and a linearly integrated Hall sensor array (LIHaS) on a wafer as the magnetic sensors, was examined for its ability to detect cracks on the combined material. The evaluation probability of a crack is discussed. In addition the detection probability of the minimum depth was reported.

• The korean journal of orthodontics
• /
• v.25 no.1 s.48
• /
• pp.43-54
• /
• 1995

This study was conducted to examine the metal release of TiN-plated stainless steel orthodontic appliances by constructing the simulated orthodontic appliances equivalent to maxillary half arch, by dividing into TiN-plated and TiN-nonplated Bloops and by dividing again these groups into welded and nonwelded groups. And then, the total quantity of metal release was obtained by measuring the amounts of both soluble and precipitated nickel and chromium after immersing in artificial saliva for 15 days. And then, the corrosion appearance of surface structure was observed by using SEM. The results of this study were summarized as follows. 1. The total amounts of released nickel and chromium showed that the TiN-plated group after welding(Group 1) was 25.46 ${\mu}g$, respectively, and 17.4 ${\mu}g$, while the TiN-nonplated group after welding(Group III) was 54.69 ${\mu}g$, respectively, and 85.27 ${\mu}g$. Then, the TiN-Plated group indicated less amounts of metal release(p<0.05). 2. The total amounts of the TiN-plated group without welding(Group II) was 0.05${\mu}g$ and 0.34${\mu}g$, respectively. Then, it was shown that the TiN-plated group without welding(Group II) indicated less metal release than that of the TiN-Plated group after welding(Group I)(p<0.01, p<0.05). 3. When observing their surface structure, there were a lot of precipitate and pitting corrosion in the groups with welding(Group I & III), when the TiN-plated group(Group I) showed lower level than the TiN-nonplated group(Group IIII). On the other hand, the groups without welding(Group II & IV) indicated a little of pitting corrosion. 4. In case of observation with the naked eyes, it was shown that there were significant disco1oration and corrosion in the groups with welding(Group I & III), while there was no any remarkable change in the groups without welding(Group II & IV).

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.69-74
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4.5wt.%Al and titanium dioxide powder $TiO_2$. These powders were coated on a carbon steel S45C by plasma spray method. The result solution was a 5% NaCl and the slat spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.344-349
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4,5wt.%Al and titanium dioxide powder Ti02. These powders were coated on a carbon steel S45C by plasma spray method. The salt solution was a 5% NaCl and the salt spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Journal of the Korean institute of surface engineering
• /
• v.36 no.3
• /
• pp.263-271
• /
• 2003

Optimal conditions of electroless nickel plating in acid baths has been studied for industrial applications of a developed EN solution. The phosphorus content in the deposition ranges from 8 to $12\;wt.\%$. The investigated EN plating parameters are ion concentrations of nickel and hypophosphite, concentration of reducing and complexing agent, temperature, and pH. The average plating rate of Ni-P deposition was ca. $14{\mu}m/h$. The EN solution used shows a deposition rate of $10{\mu}m/h$ up to seven metal turnovers.

• Journal of the Korean institute of surface engineering
• /
• v.37 no.6
• /
• pp.335-343
• /
• 2004

Bath stabilizers in the electroless nickel(EN) plating solution are known to prevent sudden bath decomposition and extend its lifetime. Further, every stabilizer has a different role and function in EN solution and it influences the surface structure. In this study, the effects of various stabilizers on the deposition rate, surface morphology, deposition content of phosphor and hardness were investigated.