• 한국세라믹학회지
• /
• 제40권1호
• /
• pp.31-36
• /
• 2003

본 연구에서는 칩 인덕터용 코어 소재로 사용되는 NiCuZn-ferrite를 공침법을 이용하여 나노크기의 초미세 분말로 합성하고, 합성된 NiCuZn-ferrite의 하소 온도에 따른 저온소결 특성 및 전자기적 특성에 관하여 고찰하였다. 조성은 (N $i_{0.4-X}$C $u_{x}$Z $n_{0.6}$)$_{1+w}$(F $e_2$ $O_4$)$_{1-w}$에서 x 값을 0.2, w 값은 0.03으로 고정하였고, 하소는 30$0^{\circ}C$에서 7$50^{\circ}C$의 온도범위에서 진행하였다. 하소 후 90$0^{\circ}C$에서 소결한 시편의 특성을 측정한 결과, 공침법으로 합성한 NiCuZn-ferrite는 90$0^{\circ}C$의 저온에서 소결밀도 4.90g/㎤, 초기투자율 164, Q-factor 72임을 확인하였다. 또한, NiCuZn-ferrite의 미세구조는 하소온도가 증가함에 따라 입자가 커지고 불균일한 상태가 되며, 초기투자율 등의 ferrites의 전자기적 특성이 저하되었다.되었다.

• 대한화학회지
• /
• 제46권1호
• /
• pp.46-51
• /
• 2002

$Ni(II){\cdot}Gly$-Gly-His(Arg)COOH와 $Cu(II){\cdot}Gly$-Gly-His(Arg)COOH 형태의 금속펩타이드를 이용하여 P. alcaligenes에서 얻은 5S rRNA의 구조를 조사하였다. 그 결과 금속 펩타이드들은 5S rRNA의 줄기-고리 구조에서 염기쌍을 이루지 않거나 불안정하게 이루는 부분을 선택적으로 변형시켰다. 금속펩타이드의 선택성은 중심 금속이 Ni(II)인 경우와 Cu(II)인 경우에 차이가 거의 없었다. 금속펩타이드를 이용한 절단 결과를 금속 착물 M(II)CR을 이용한 결과와 비교하면 금속펩타이드에 의한 선택성이 더 크게 나타났다. 금속펩타이드와 금속착물을 이용한 절단 결과로부터 P. alcaligenes에서 얻은 5S rRNA의 이차구조를 살펴보았다.

• 한국의류산업학회지
• /
• 제4권3호
• /
• pp.266-272
• /
• 2002

This research is compared and analyzed variations of the heavy metal contents in human hairs according to treating permanent wave manipulation before and after and permanent wave agents. This is the survey of women's hairs in 19 years old. On the basis of this we would like to analyze a extend of exposing of heavy metal scientifically. Also, we would to show a basic data for the permitted limits of heavy metal to keep the healthy hair The conclusion is as follows.; Mean contents of heavy metal in hairs is 2.11 ppm (Pb), 0.25 ppm (Cd), 2.62 ppm (Ni), 256 ppm (Zn), 8.45 ppm (Cu). In reducing agents (processing lotions) of perm, 1.50 ppm (Pb), 0.03 ppm (Cd), 0.05 ppm (Ni), 15.45 ppm (Zn), 0.86 ppm (Cu) in a perm (S), 2.30 ppm (Pb), 0.05 ppm (Cd), 0.05 ppm (Ni), 13.05 ppm (Zn), 0.65 ppm (Cu) in a perm (T). In oxidizing agents (neutralizer) of perm, 1.40 ppm (Pb), 0.03 ppm (Cd), 0.09 ppm (Ni), 9.05 ppm (Zn), 0.65 ppm (Cu) in a perm (S), 1.50 ppm (Pb), 0.02 ppm (Cd), 0.16 ppm (Ni), 8.00 ppm (Zn), 0.85 ppm (Cu) in a perm (T). Mean contents of lead(Pb) didn't show significant differences according to treating cysteine perm agents, showed it according to 3 treating thioglycolic acid perm agents (p<0.05). Mean contents of cadmium(Cd) showed significant differences (p<0.001) according to 2 treating both perm agents. Mean contents of nickel (Ni) showed neither. Mean contents of zinc (Zn) showed significant differences according to 2 treating cysteine perm agents (p<0.001) and 1 treating thioglycolic acid perm agents (p<0.01). Mean contents of copper (Cu) didn't show significant differences according to treating cysteine perm agents, showed it according to 1 treating thioglycolic acid perm agents (p<0.001).

• Progress in Superconductivity
• /
• 제10권1호
• /
• pp.45-49
• /
• 2008

For the development of superconducting fault current limiters (SFCLs), fault current limiting elements were fabricated out of Bi-2212 bulk tubes and tested. The SFCL elements consisted of tube shaped Bi-2212 bulks and metal shunts for the stabilizers. Firstly, the Bi-2212 bulk tubes were processed based on a design of monofilar coils in order to acquire large resistance and high voltage rating. 300 mm-long Bi-2212 tubes were designed to have the current path of 410 cm in length with 24 turns and 41 mm in diameter. The processed monofilar coil, as designed, had 300 A $I_c$ at 77 K. The fabricated superconducting monofilar coils were affixed to Cu-Ni alloy as that of stabilizers. The Cu-Ni alloys were processed to have the same shape of the superconducting monofilar coils. The Cu-Ni coil had resistivity of 32 ${\mu}{\Omega}$-cm at 77 K and 37 ${\mu}{\Omega}$-cm at 300 K. The metal shunts were attached to the outside of the Bi-2212 monofilar coil by a soldering technique. After the terminals made of copper were attached to both ends of the superconductor-metal shunt composite, the gap between the turns and the surface of the elements was filled with an epoxy and a dense mesh made of FRP in order to enhance the mechanical strength. The completed SFCL elements went through fault tests, and we confirmed that the voltage rating of 143 $V_{rms}$ (E =0.35 $V_{rms}$/cm) could be accomplished.

• 한국세라믹학회지
• /
• 제51권5호
• /
• pp.477-480
• /
• 2014

An $Al_2O_3$-CuO-ZnO (ACZ) precursor powder was synthesized by a facial sol-gel process using a nonionic surfactant span 80 as the chelating agent to improve the surface area and morphology. When creating a hydrogen membrane, several kinds of properties are required, such as easy dissociation of hydrogen molecules, fast hydrogen diffusion, high hydrogen solubility, and resistance to hydrogen embrittlement. ACZ-Ni composite membranes (cermet) were prepared with this precursor and pure Ni powder via the hot press sintering (HPS) method. The ACZ powder was characterized by XRD, BET, and FE-SEM. Hydrogen permeation experiments were performed by Sievert's type of hydrogen permeation membrane equipment. The hydrogen permeability of ACZ/Ni 10 wt% and ACZ/Ni 20 wt% was obtained as 7.2 and $10molm^{-2}s^{-1}$ at RT, respectively. These values of the corresponding membranes were slightly increased with increasing pressures.

• 소성∙가공
• /
• 제10권7호
• /
• pp.565-572
• /
• 2001

It is well known that a multicomponent $Zr_{4l.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ bulk metallic glass alloy shows good bulk glass forming ability due to its high resistance to crystallization in the undercooled liquid state. DSC and XRD have been performed to confirm the amorphous structure of the master alloy. To investigate the mechanical properties and deformation behavior of the bulk metallic $Zr_{4l.2}Ti_{13.8}Cu_{12.5}Ni_{10}Be_{22.5}$ alloy, a series of compression tests has been carried out at the temperatures ranging from $351^{\circ}C$ to $461^{\circ}C$at the various initial strain rates from $2{\times}10^4s^1$ to $2{\times}10^2s^1$. Three types of nominal stress-strain curves have been identified such as linear stress-strain relationship meaning fracture at maximum stress, plastic deformation including stress overshoot and steady-state flow, plastic deformation without stress overshoot depending on the strain rate and test temperature. Also DSC analysis for the compressed specimens was carried out to investigate the change of structure, thermal stability and crystallization behavior for the various test conditions.

• 한국분말재료학회지
• /
• 제17권1호
• /
• pp.36-43
• /
• 2010

In present work, amorphous TiCuNi powders were fabricated by mechanical alloying process. Amorphization and crystallization behaviors of the TiCuNi powders during high-energy ball milling and subsequent microstructure changes were studied by X-ray diffraction and transmission electron microscope. TEM samples were prepared by the focused ion beam technique. The morphology of powders prepared with different milling times was observed by field-emission scanning electron microscope and optical microscope. The powders developed a fine, layered, homogeneous structure with milling times. The crystallization behavior showed that glass transition, $T_g$, onset crystallization, $T_x$, and super cooled liquid range ${\Delta}T=T_x-T_g$ were 628, 755 and 127K, respectively. The as-prepared amorphous TiCuNi powders were consolidated by spark plasma sintering process. Full densified TiCuNi samples were successfully produced by the spark plasma sintering process. Crystallization of the MA powders happened during sintering at 733K.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2006년도 추계학술발표논문집
• /
• pp.162-166
• /
• 2006

기존의 Ni PPF를 대신하여 새롭게 Cu-Sn 합금을 barrier층으로 적용한 PPF를 제조하여, 그 제반 특성들을 조사하였다. Cu-Sn 합금도금층은 기존의 Ni PPF와 마찬가지로 반도체 substrate로서 지녀야 할 열적 안정성을 충분히 확보할 수 있음을 알 수 있었다. 또한 기지층 및 보호층과의 계면간 밀착성이 Ni PPF보다 더 우수했으며, 미세한 결정립들이 균일하게 분포한 도금층 구조를 나타내어, 이들이 Ni PPF보다 구조적으로 더욱 안정할 것임을 예상할 수 있었다. 한편 강자성 거동을 보이는 Ni PPF와는 달리 Cu-Sn PPF는 완벽한 상자성 특성을 보여, 점차 고집적, 고밀도화 되어가는 반도체 패키지의 동작중 발생할 발열 및 신호간섭의 위험이 원천적으로 제거될 수 있음을 보였으며, solderability, bondability 등의 field 특성 또한 Ni PPF와 거의 비슷함을 알 수 있었다.

• 한국분말재료학회지
• /
• 제11권5호
• /
• pp.376-382
• /
• 2004

Nanoscale Cu-Ni alloy nanopowders have been produced by a pulsed wire evaporation method in an inert gas. The effect of Cu-Ni alloy nanopowders as additives to motor oil on the tribological properties was studied at room temperature. The worn surfaces were characterized by Scanning Electron Microscopy (SEM) and Energy-Dispersive X-ray Spectroscopy (EDS). Cu-Ni alloy nanopowders as additives lowered coefficient of friction and wear rate. It was found that a copper containing layer on the worn surface was formed, and deposited layers of the metal cladding acted as lubricant on the worn surface, reducing the friction coefficient. It was clearly demonstrated that Cu-Ni alloy nanopowders as additives are able to restore the worn surface and to preserve the friction surfaces from wear.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2002년도 추계기술심포지움논문집
• /
• pp.109-113
• /
• 2002

본 연구에서는 공침법에 의한 초미세분말을 이용하여 제조된 (NiCuZn)-ferrite와 건식법을 이용하여 제조된 (NiCuZn)-ferrite의 저온소결 특성 및 전자기적 특성을 상호 비교 분석하였다. 조성은 (N $i_{0.4-x}$C $u_{x}$Z $n_{0.6}$)$_{1+w}$(F $e_2$ $O_4$/)$_{1-w}$에서 x의 값을 0.2, w의 값은 0.03으로 고정하였고, 소결은 공침법으로 합성된 분말의 경우 초기열처리과정을 거쳐 최종적으로 90$0^{\circ}C$에서, 건식법의 경우 11$50^{\circ}C$의 온도에서 진행하였다. 그 결과, 공침법으로 제조된 (NiCuZn)-ferrite는 건식법으로 제조된 (NiCuZn)-ferrite보다 20$0^{\circ}C$이상 낮은 소결온도에서 높은 소결밀도 값을 가졌으며, 품질계수 등 칩 인덕터에서 중요한 요소인 전자기적 특성이 우수하게 나타났다. 또한, 공침법으로 합성된 페라이트는 분말의 초기열처리온도에 따라 최종소결 특성이 크게 변하였다. 그밖에 공침법과 건식법으로 합성한 (NiCuZn)-ferrite의 결정성, 미세구조들을 XRD, SEM, TEM을 이용하여 비교 고찰하였다.하였다.다.