• 한국표면공학회지
• /
• 제48권1호
• /
• pp.23-26
• /
• 2015

What causes the transformation of a solar cell is the behavior difference of thermal expansion occurred between the substrate and the layer of semiconductor used in the solar cell. Therefore, the substrate has to possess a behavior of thermal expansion that is similar with that of semiconductor layer. This study employed electroforming to manufacture Fe-Ni alloy materials of different compositions. To verify the result from a finite element analysis, a two-dimensional Mo substrate was calculated and its verification experiment was conducted. The absolute values from the finite element analysis of Mo/substrate structure and its verification experiment showed a difference. However, the size of residual stress of individual substrate compositions had a similar tendency. Two-dimensional CIGS/Mo/$SiO_2$/substrate was modeled. Looking into the residual stress of CIGS layer occurred while the temperature declined from $550^{\circ}C$ to room temperature, the smallest residual stress was found with the use of Fe-52 wt%Ni substrate material.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 C
• /
• pp.1514-1516
• /
• 2003

NiCrFe 박막을 이용한 정밀급 박막 스트레인 게이지를 개발하였으며, 그 특성을 요약하면 다음과 같다. 스트레인한계: 5 % 이하, 저항: 350 ${\sim}$ 2,000 ${\Omega}$, 게이지 율: 2.1, 정도: 0.1 %, 피로한계 : $10^6$ at ${\pm}1500{\mu}{\varepsilon}$, 사용온도범위: $-75{\sim}150^{\circ}C$, 온도 출력: ${\pm}1{\mu}{\varepsilon}/^{\circ}C$, 게이지율변화 : +0.009%/$^{\circ}C$ 국산화된 박막 스트레인 게이지는 디지털 로드 셀 등에 적용할 수 있으며, 이 분야의 국내 기술력 향상에 이바지 할 것이다.

• 한국표면공학회지
• /
• 제49권6호
• /
• pp.587-594
• /
• 2016

Various surface treatments and thin film coating processes on the surface of injection die steel have been developed to extend the life. Most of previous studies were mainly focused on investigating the wear and static bonding behavior of thin films. In this study complex surface treatments of DLC coating combined with ion nitriding were applied to increase fatigue life and wear resistance. Ion nitriding, DLC coating, and DLC coating following nitriding on the surface of Fe-3.0Ni-0.7Cr-1.4Mn-X steel were investigated to uncover the beneficial effect which is applicable to injection die. The effect of various surface treatments and coating conditions on high cycle fatigue resistance was studied. Surface morphology change during fatigue tests were observed with AFM. Fatigue life of the die steel increased by 10 to 1,000 times at the various level of stress amplitudes in the condition of DLC coating following the ion nitriding for 3 hrs comparing with the only DLC coated condition.

• 한국자기학회지
• /
• 제12권3호
• /
• pp.94-98
• /
• 2002

20nm이하의 얇은 박막에서도 높은 보자력이 요구되는 Ti/CoCrPt 수직자기기록박막의 보자력 향상을 위해 Al, Cu, Ni, Cr, Ag, Mg, Fe, Co, Pd, Au, Pt, Mo, Hf등의 여러 하지층과 제조조건이 보자력에 미치는 영향을 조사하였다 이들 중 Ag과 Mg하지층은 Ti/CoCrPt박막의 보자력을 향상시켰으며 특히 2nm Ag 하지층을 사용할 경우 10nm CoCrPt 박막에서 2200 Oe의 높은 보자력을 보일뿐 아니라 $\alpha$값을 낮추는 효과가 있었다. 그러나 Ag를 하지층으로 사용하면 기대와는 달리 Ti(002)면의 우선배향 성장이 전혀 일어나지 않아 보자력 증대에 다른 기구가 작용하는 것으로 판단되었다. 그리고 표면의 거칠기가 큰 기판에서는 보자력뿐만 아니라 역자구생성자계도 감소하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 추계학술대회 논문집 Vol.17
• /
• pp.264-267
• /
• 2004

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the $LaNiO_3$ (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thinfilms were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization Pr and coercive field were $23.5\;C/cm^2$ and 120 kV/cm, respectively.

• Carbon letters
• /
• 제9권1호
• /
• pp.17-22
• /
• 2008

A carbon nanotube (CNT) of diameter ~20 nm has been synthesized by spray pyrolysis of turpentine oil using Ni/Fe catalyst. Pellet of CNTs has been used as a target to produce semiconducting carbon thin film of band gap 1.4 eV. Presence of oxygen pressure in the pulse laser deposition (PLD) chamber helped to control the $sp^3/sp^2$ ratio to achieve the desired band gap. Results are discussed with the help of Raman spectra, SEM TEM micrographs and optical measurements suggest that semiconducting carbon thin film deposited by PLD technique has retained its nanotubes structure except that its diameter has increased from 20 nm to 150 nm.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
• /
• pp.352-355
• /
• 2003

[ $Bi_{3.25}La_{0.75}Ti_3O_{12}$ ] (BLT) thin films were prepared by using metal organic decomposition method onto the LaNiO3 (LNO) bottom electrode. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures ranging from 450 to $650^{\circ}C$, the BLT thin films were successfully deposited on LNO bottom electrode and exhibited (117) orientation. The BLT thin films annealed as low as $600^{\circ}C$ showed excellent ferroelectricity, higher remanent polarization and no significant degradation of switching charge at least up to $5{\times}10^9$ switching cycles at a frequency of 100 kHz and 5 V. For the annealing temperature of $600^{\circ}C$, the remanent polarization $P_r$ and coercive field were $23.5\;{\mu}C/cm^2$ and 120 kV/cm, respectively.

• 한국자기학회지
• /
• 제20권3호
• /
• pp.89-93
• /
• 2010

수직자기이방성을 갖는 $[Pd/Co]_N$ 다층박막을 이용한 스핀밸브구조에서 Cu에 인접한 강자성층의 물질의 종류와 두께에 따른 자기적 특성을 연구하였다. 본 연구에서 강한 수직자기이방성에 기인한 자유층의 큰 보자력을 줄이기 위하여 Cu 비자성층에 인접 한 강자성층에 물질을 NiFe, $Co_8Fe_2$, $Co_9Fe_1$로 삽입하여 각 물질이 갖는 수직 이방성 크기를 조절하여 수직자기 이방성을 갖는 스핀밸브 구조의 자기적 특성을 실험하였다. $Co_9Fe_1$ 물질을 Cu에 인접한 두 강자성층에 0.078 nm의 얇은 두께로 삽입한 결과 0.58%의 자기저항비를 가짐과 동시에 5 Oe의 작은 보자력을 나타내었다. 또한 그 두께를 0.7 nm로 증가시켰을 때 최대 6.7%의 자기저항비를 얻었고 자유층의 보자력을 약 100 Oe로 감소시켰다.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.295-299
• /
• 1998

페라이트 도금 방법은 진공이 불필요하며 저온(<10$0^{\circ}C$)에서 페라이트 박막을 제작할 수 있다. 이 방법으로 기판온도 8$0^{\circ}C$, 산화용액의 pH 7.1~8.8 영역에서 모두 스피넬 구조의 NixFe3-xO4 (x=0.162~0.138) 박막을 얻었다. 이들은 열처리를 하지 않았음에도 불구하고 결정성이 우수한 다결정의 박막을 얻었다. 박막의 성장속도는 산화용액의 pH가 7.1에서 8.8까지 변함에 따라 성장속도가 143$\AA$/min에서 255 $\AA$/min 까지 증가하였다. 산화용액의 pH가 증가할수록 입경의 크기가 증가하고, 보자력은 감소하였다.

• 한국재료학회지
• /
• 제14권9호
• /
• pp.634-641
• /
• 2004

The photocatalytic performance of $TiO_2$ thin films coated on porous alumina balls using various aqueous $TiOCl_2$ solutions as starting precursors, to which 1.0 $mol\%$ transition metal ($Ni^{2+},\;Cr^{3+},\;Fe^{3+},\;Nb^{3+},\;and\;V^{5+}$) chlorides had been already added, has been investigated, together with characterizations for $TiO_2$ sols synthesized simultaneously in the same autoclave through hydrothermal method. The synthesized $TiO_2$ sols were all formed with an anatase phase, and their particle size was between several nm and 30 nm showing ${\zeta}-potential$ of $-25{\sim}-35$ mV, being maintained stable for over 6 months. However, the $TiO_2$ sol added with Cr had a much lower value of -potential and larger particle sizes. The coated $TiO_2$ thin films had almost the same shape and size as those of the sol. The pure $TiO_2$ sol showed the highest optical absorption in the ultraviolet light region, and other $TiO_2$ sols containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ showed higher optical absorption than pure sol in the visible light region. According to the experiments for removal of a gas-phase benzene, the pure $TiO_2$ film showed the highest photo dissociation rate in the ultraviolet light region, but in artificial sunlight the photo dissociation rate of $TiO_2$ coated films containing $Cr^{3+},\;Fe^{3+}\;and\;Ni^{2+}$ was measured higher together with the increase of optical absorption by doping.