• Journal of the Korean Electrochemical Society
• /
• v.17 no.3
• /
• pp.164-171
• /
• 2014

A highly sensitive and selective non-enzymatic glucose sensor has gained great attention because of simple signal transformation, low-cost, easily handling, and confirming the blood glucose as the representative technology. Until now, glucose sensor has been developed by the immobilization of glucose oxidase (GOx) on the surface of electrodes. However although GOx is quite stable compared with other enzymes, the enzyme-based biosensors are still impacted by various environment factors such as temperature, pH value, humidity, and toxic chemicals. Non-enzymatic sensor for direct detecting glucose is an attractive alternative device to overcome the above drawbacks of enzymatic sensor. Many efforts have been tried for the development of non-enzymatic sensors using various transition metals (Pt, Au, Cu, Ni, etc.), metal alloys (Pt-Pb, Pt-Au, Ni-Pd, etc.), metal oxides, carbon nanotubes and graphene. In this paper, we show that Ni-based nano-particles (NiNPs) exhibit remarkably catalyzing capability for glucose originating from the redox couple of $Ni(OH)_2/NiOOH$ on the surface of ITO electrode in alkaline medium. But, these non-enzymatic sensors are nonselective toward oxidizable species such as ascorbic acid the physiological fluid. So, the anionic polymer was coated on NiNPs electrode preventing the interferences. The oxidation of glucose was highly catalyzed by NiNPs. The catalytically anodic currents were linearly increased in proportion to the glucose concentration over the 0~6.15 mM range at 650 mV versus Ag/AgCl.

• Journal of Welding and Joining
• /
• v.20 no.2
• /
• pp.82-89
• /
• 2002

In order to clarify hot cracking phenomena occurred in Inconel 690 welds and it's prevention, in this study, the cracking behavior and the influence of welding variables on cracking in Inconel 690 overlay welds on Mn-Ni-Cr-Mo steel(SA 508 cl.3) for pressure vessel were investigated by using mock-up test. The main results are as follows: The cracks in Inconel 690 overlay welds were mainly generated near the start and the end part of welding beads adjacent to STS 309L welded outside of Inconel 690 welds. Most of the cracks showed typical solidification crack, and also it was assumed that there was possibility of liquation cracking in HAZ. The existence of Nb constituents or concentration of Nb was recognized on the fracture facets of the solidification cracks in the welds by SMAW. Therefore Nb was considered to be the main factor of the solidification cracking. As the weld heat input was more increased and the weld bead length was longer, the extent of cracking was more increased. Moreover the extent of cracking was considerably decreased by changing of welding sequence to the start and the end part of welds. Hot cracking in welds by GTAW was considerably decreased as compared with that of SMAW. And cracks were well generated in the Inconel 690 overlay welds adjacent to 575 309L welds. This means that the hot cracking susceptibility of Inconel 690 welds was largely varied by chemical components and/or compositions of filter metals, base metals and neighboring welds.

• Journal of the Korean Chemical Society
• /
• v.59 no.2
• /
• pp.125-131
• /
• 2015

Inhibition effects of histidine (His), methionine (Met) on the corrosion of nickel were investigated in deaerated 0.5 M HCl and 0.5 M $H_2SO_4$ solution. All the inhibition efficiency for the nickel corrosion depended on the anodic inhibition. Amino acid adsorption process on nickel surface in the solution of HCl can be explained by modified Langmuir isotherm, however, in the solution of $H_2SO_4$ by Temkin logarithmic isotherm due to the interaction between the adsorbed molecules. The molecule of histidine dissolved in HCl-solution were physically adsorbed due to the electrostatic interaction between the surface of {$Ni-Cl^-$} and the {$-NH{_3}^+$} and {$-NH^+=$} of His. However the other cases of adsorption in this investigation can be explained by chemical adsorption between the empty d-orbital of Ni and the lone pair of electron in His and Met.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.208-208
• /
• 2003

저온균일침전법(HPPLT)으로 제조된 TiO$_2$나노분말은 10$0^{\circ}C$이하의 온도에서 rutile상을 얻을 수 있다. 또한, rutile에서 anatase로의 상변화는 합성시간, 가열속도, 반응온도 그리고 음이온 첨가에 의해 일어난다고 보고되어졌지만, 금속양이온들에 의한 상변화는 알려진 바가 없다. 따라서, 다양한 양이온을 첨가하여 저온균일침전법에서 TiO$_2$의 상변화가 어떻게 일어나는지를 조사하였다. 출발원료인 TIC1$_4$를 사용하여 가수분해하여 0.67M의 TiOCl$_2$을 얻었다. 얻어진 TiOCl$_2$ 수용액에 각각 0.01M의 금속염화물(ZrOCl$_2$, NiCl$_2$, CuCl$_2$, FeCl$_3$, AlCl$_3$ 그리고 NbCl$_{5}$)을 첨가한 후 반응기에 넣고 10$0^{\circ}C$에서 4시간동안 가열하였다 가열한 후 얻어진 침전물에 NaOH 수용액을 이용하여 PH 7-8로 중화한 후 증류수로 Cl$^{-}$이온이 제거될 때까지 충분히 세척하였다. 세척된 침전물을 105$^{\circ}C$에서 24h동안 건조하여 분말을 얻었고, rutile에서 anatase로의 상변화특성을 관찰하기 위하여 XRD, SEM, TEM, ICP 분석을 실시하였다.

• Microbiology and Biotechnology Letters
• /
• v.15 no.5
• /
• pp.301-305
• /
• 1987

Moderate halophilic bacteria isolated from several kinds of salted and fermented sea foods (jeotkal) collected from commercial market were identified and investigated on their selt requirements. It was confirmed that the isolates were dominantly moderate halophiles according to their NaCl requirement to grow. And their salt requirements in their growth have been examined for Na, K, Ni and mg ions. Among them, the most dominant and distinctive three strains in protease pro-duction have been examined and two of them identified to be halophilic Flavobacterium sp., and the other one to be halophilic Pseudomonas sp..1'heir optimum growth was observed at 3$0^{\circ}C$ and at 10 percent of NaCl.

• Korean Journal of Microbiology
• /
• v.32 no.1
• /
• pp.78-83
• /
• 1994

Membrane-bound alcohol dehydrogenase(ADH) was purified to homogeneous state fron an acetic acid producing bacteria, Acetobacter sp. HA. The enzyme was purified about 153-fold with an overall yield of 35% from the crude cell extract by solubilization and extraction of the enzyme with Triton X-100 and subsequent fractions by column chromatography. Upon sodium dodecyl sulphate-PAGE, the enzyme showed the presence of three subunits with a molecular mass of 79,000 daltons, 49,000, and 45,000 daltons, respectively. Absorption oxidized aliphatic alcohols with a straight carbon chain except for methanol. Formaldehyde, acetaldehyde and glutaraldehyde were also oxidizable substrates. The apparent $K_m$ for ethanol was 1.38mM. The optimun pH and temperature were 5.0~6.0 and 32${\circ}C$, respectively. $V_2O_5$ and heavy metals such as $ZnCl_2\;and\; NiCl_2$ were inhibitory to the enzyme activity.

• Applied Chemistry for Engineering
• /
• v.7 no.3
• /
• pp.416-423
• /
• 1996

Electrochemical reduction of thionyl chloride in 1.5 M $LiAlCl_4/SOCl_2$ electrolyte solution containing tetradentate Schiff base Co(II), Ni(II), Cu(II), and Mn(II) complexes has been investigated at the glassy carbon electrode. The catalyst molecules of transition metal(II) complexes were adsorbed on the electrode surface and reduced thionyl chloride resulting in a generation of oxidized catalyst molecules. There was an optimum concentration for each catalyst compound. The current density of $SOCl_2$ reduction was enhanced up to 150% at the catalyst contained electrolyte solution. The reduction currents of thionyl chloride were increased and the reduction potentials were shifted to the negative potential as scan rates became faster. The reduction of thionyl chloride was proceeded to diffusion controlled reaction.

• Journal of the Korean Chemical Society
• /
• v.25 no.2
• /
• pp.61-66
• /
• 1981

A method for calculation of the contribution of $\pi$ bonding molecular orbitals to the dipole moments for octahedral [M(III)$A_3B_3$] type complexes has been developed [M(III) = Ti(III), V(III), Cr(III), Fe(III) or Co(III); A = O or N; B = N, S or Cl]. The contribution of ${\pi}$ bonding molecular orbitals to the dipole moments is found to be smaller than that of ${\sigma}$ bonding molecular orbitals but this contribution may not be negligible even for chelate complexes in which delocalization of ${\pi}$ electron is assumed. The calculated dipole moments (u = $u_{\sigma}$ + $u_{\pi}$) are closer to the experimental values than those for the case where only ${\sigma}$ bonds are assumed to be formed.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.518-525
• /
• 2000

The open-chain hexadentate N$_4$, O$_2$ ligands 1,13-bis(2-hydroxybenzyl)-2,5,9,12-tetraazatridecane-tetrahydrochloride (BSATD${\cdot}$4HCl) and 1,14-bis (2-hydroxybenzyl)-2,6,9,12-tetraazatetradecane-tetrahydrochloride (BSATED${\cdot}$ 4HCl) have been synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR and Mass. Their proton dissociation constants(log$K^{n}_{H}$) and stability constants(log$K_{ML}$) for Cu(II), Ni(II), Co(II), and Zn(II) ions were determined in aqueous solution by potentiometry and compared with those of analogous N$_4$, O$_2$ ligands contain ethylenic spacers or propylenic spacers, which make six-membered chelate rings between the aliphatic nitrogen atoms. Synthesis and characterization of [Cu(BSATD)]ClO$_4$ and [Cu(BSATED)](ClO$_4$)$_2$ complexes are described.

• Korean Journal of Metals and Materials
• /
• v.48 no.6
• /
• pp.506-513
• /
• 2010

The composite coatings of $(ZrO_2-8Y_2O_3)$/(Ni-22Cr-10Al-1Y) were prepared by the air plasma spraying method. They consisted of (Ni,Cr)-rich regions,$(ZrO_2-Y_2O_3)$-rich regions, and $Al_2O_3$-rich regions that were formed by oxidation of Al from (Ni-22Cr-10Al-1Y) during spraying. The coatings corroded at 800 and $900^{\circ}C$ in NaCl-$Na_2SO_4$ molten salts up to 50 hr. Ni, Cr and Al oxidized to NiO, $Cr_2O_3$ and ${\alpha}-Al_2O_3$, respectively. These oxides and $(ZrO_2-Y_2O_3)$ were dissolved off into the molten salts during hot corrosion, which resulted in the ever-lasting corrosion of the composite coatings. Chromium diffused out from the (Ni,Cr)-rich regions and oxidized to $Cr_2O_3$, which was most frequently found as surface scales. Aluminum retained in the (Ni,Cr)-rich regions were similarly diffused out.