• Corrosion Science and Technology
• /
• 제22권6호
• /
• pp.478-483
• /
• 2023

This study examined the corrosion behavior of bimetal materials composed of Fe-Ni alloy and Fe-Ni-Mo alloy, both suitable for use in electromagnetic switches. Electrochemical polarization and weight loss measurements revealed that, in contrast to Fe-Ni alloy, which exhibited pseudo-passivity behavior, Fe-Ni-Mo alloy had higher anodic current density, displaying only active dissolution and greater weight loss. This indicated a lower corrosion resistance in the Fe-Ni-Mo alloy. Equilibrium calculations for the phase fraction of precipitates suggested that the addition of 1 wt% Mo may lead to the formation of second-phase precipitates, such as Laves and M₆C, in the γ matrix. These precipitates might degrade the homogeneity of the passive film formed on the surface, leading to localized attacks during the corrosion process. Therefore, considering the differences in corrosion kinetics between these bimetal materials, the early degradation caused by galvanic corrosion should be prevented by designing a new alloy, optimizing heat treatment, or implementing periodic in-service maintenance.

• 한국초전도ㆍ저온공학회논문지
• /
• 제25권3호
• /
• pp.38-42
• /
• 2023

The evaluation of no-insulation (NI) high-temperature superconducting (HTS) typically uses the lumped equivalent circuit (LEC) model. Constant parameters in the NI HTS LEC model accurately predict voltage and central magnetic field at currents below the critical current. However, it is difficult to find constant circuit parameters that simultaneously satisfy the measured voltage and magnetic field under overcurrent conditions. Recent research highlights changes in contact resistance during transient conditions, which may impact power loss estimation in NI HTS coils. Therefore, we confirm the influence of contact resistance changes on loss calculation in the transient state for NI HTS coil. To achieve this, we introduce a measurement data analysis method based on the LEC model and compare it with the LEC model using constant circuit parameters.

• 한국전기전자재료학회논문지
• /
• 제15권5호
• /
• pp.406-411
• /
• 2002

Ni-Zn ferrite is required to have predominant and stable characteristics in the range of high frequency for the power line communication, so that microstructures and magnetic properties such as power loss and initial permeability in $Ni_{0.8}Zn_{0.2}Fe_2O_4$ were investigated in terms of variable $Bi_2O_3,CaO$ and $V_2O_5$ contents. $Bi_2O_3$ and $V_2O_5$ liquid phase created during sintering process promoted sintering and grain growth but much of the closed pore existed in the grains. The grain size of the specimens with $V_2O_5$ of over 0.5 wt% decreased as the result of "pinning effect"and the resonance frequency increased with CaO of 0.3we%. The high initial permeability of 81.52%, resonance frequency of 17.05 MHz and low power loss of 17,858 kW/$\textrm{m}^3$ were obtained from the samples with $Bi_2O_3$ of 0.5, CaO of 0.3, and $V_2O_5$ of 0.7 wt%.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.638-641
• /
• 1999

In consideration of Dielectric loss and Temperature stability, 3-element system dopped with NiO, $Cr_2O_3$, well-known as Hardner and Stabilizer whose primary element is PZT was eximanated its structure, Temperature Coefficient of Capacitor, relative resistivity for Temperature Compensation condensor study. dopping with Nio, $Cr_2O_3$, Temperature Characteristic is developed, Dielectric loss largely represented useful1 small values in specimens dopped with NiO 0.2wt%, and specimence sintered at $110^{\circ}C$ dopped with $Cr_2O_3$, 0.1wt% also relative resistivity largely showed tendency of decrement According to dopping NiO more.

• 한국자기학회지
• /
• 제6권6호
• /
• pp.382-387
• /
• 1996

본 연구에서는 ${(Ni_{x}Cu_{0.2}Zn_{0.8-x}O)}_{1-w}{(Fe_{2}O_{3})}_{1+w}$의 Ni 함량(x)과 $Co_{3}O_{4}$ 첨가량에 따른 복소투자율 변화에 관하여 검토하였다. Ni 함량 x=0.6 이상에서는 매우 좁은 투자율 허수항($\mu$") 피이크가 형성됨으로서 다른 조성에 비해 손실이 적음을 알 수 있었고 공명주파수($f_{\mu"max}$)는 Ni 함량의 변화와 비례하여 현저하게 증가하였다. $Fe_{2}O_{3}$ 결핍량(w)이 많을 수록 $\mu$" 값은 낮았으나, $Fe_{2}O_{3}$ 결핍량(w)의 변화가 공명주파수에는 큰 영향을 미치지 않는 경향을 나타내었다. NiCuZn 페라이트 조성에 대하여 $Co_{3}O_{4}$를 첨가한 경우는 첨가량이 많아짐에 따라 초기투자율이 감소하여 $f_{\mu"max}$ 값은 증가하였으나, 전체적인 손실의 정도를 제어하는데에는 Ni 함량을 변화시키는 것이 더 효과적임을 알 수 있었다.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.375-378
• /
• 2018

Conductive and dielectric SiC are fabricated using electroless plating of Ni-Fe films on SiC chopped fibers to obtain lightweight and high-strength microwave absorbers. The electroless plating of Ni-Fe films is achieved using a two-step process of surface sensitizing and metal plating. The complex permeability and permittivity are measured for the composite specimens with the metalized SiC chopped fibers dispersed in a silicone rubber matrix. The original non-coated SiC fibers exhibit considerable dielectric losses. The complex permeability spectrum does not change significantly with the Ni-Fe coating. Moreover, dielectric constant is sensitively increased with Ni-Fe coating, owing to the increase of the space charge polarization. The improvements in absorption capability (lower reflection loss and small matching thickness) are evident with Ni-Fe coating on SiC fibers. For the composite SiC fibers coated with Ni-Fe thin films, a -35 dB reflection loss is predicted at 7.6 GHz with a matching thickness of 4 mm.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제49권4호
• /
• pp.240-245
• /
• 2000

The self-field losses in a long multifilamentary Bi-2223/AgMgNi tape with varying transport current, voltage tap configurations, frequency and tape arrangements were investigated. Experimental results show that the measured losses are strongly dependent on voltage gap configurations but independent on tape arrangements. All voltage taps except the center tap are found to agree well with those predicted by Norris for an elliptical conductor. The self-field losses are purely hysteretic in nature in the range of applied frequencies for the transport currents below the critical current.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.198-205
• /
• 2016

For the study on the ion exchange of nickel hexacyanoferrate(NiHCNFe) electrode with the several cations, the film of hexacyanoferrate was prepared on the bare nickel surface by the electrochemical and chemical methods in the solution composed with 5mM K3Fe(CN)6 and 100mM KNO3. To compare the capability of the ion exchange of NiHCNFe film electrode, the repeated cyclic voltammograms were measured in the 0.5M cation nitrate solutions at $25^{\circ}C$ and pH7. It was found that the capacity of the electrochemically derivatized NiHCNFe reduced in the rate of 0.5~0.7%/cycle and was nearly exhausted at the 150th potential cycle. Better result was obtained from that the capacity loss of the chemically assembled NiHCNFe was less than 0.02%/cycle for 5,000cycles. Furthermore, the residual capacity was more than 30% at the 5,000th cycle.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.176-184
• /
• 2016

Electrochemical ion exchange method is expected to be one of the most acceptable techniques for the separation of radioactive cations from nuclear wastewater. In this study a thin film of hexacyanoferrate on nickel surface was derivatized chemically in an aqueous potassium-ferricyanide solution. Electrochemical redox behavior of the nickel hexacyanoferrate(NiHCNFe) film electrode was investigated with the use of cyclic voltammetry potentiostated from -100 to 800 mV versus SCE. The electro-reduction characteristics of the NiHCNFe film were examined in the cobalt solutions. The NiHCNFe ion exchanger was more useful at lower concentration, lower temperature, and pH7 of the cobalt solution. The capacity loss of NiHCNFe was 0.018%/cycle that was less than the average loss of 2~3%/cycle of the convective organic exchanger. The 45~55% of the initial cobalt ions was electro-deposited on the NiHCNFe by using continuous recirculating reactor system. As a result, it was found that the electroactive NiHCNFe films showed better performance than the organic resins for the separation of cobalt ion from the aqueous solutions.

• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.49-54
• /
• 2023

최근 SIP (System in Packaging) 기술은 고주파(5G 이상) 통신 및 미세 피치 회로 특성을 만족해야 한다. 기존 ENIG (Electroless Ni/Immersion Au Plating) 표면처리는 전송 손실이 증가하여 고주파에 적합하지 않으므로, 니켈 도금층이 없어도 패턴 및 패드의 신뢰성 수준을 만족시킬 수 있는 표면 처리 기술이 검토되고 있다. 본 논문에서는 고주파 통신 대응을 위한 Ni-less 표면처리기술과 소재에 따른 주파수 특성 등에 대한 연구 동향을 조사하였다.