• Proceedings of the Optical Society of Korea Conference
• /
• 2005.07a
• /
• pp.204-205
• /
• 2005

Studies on display has been requested some major changes due to the high growth of the handheld terminal market. Therefore, the self emitting OLED(Organic Light Emitting Diode) has been interested as a next generation flat plane display because of its preeminent characteristics such as quick response characteristics, higher performance viewing angle, low power consumption, and panel floating. However, a trend of the display market is moving to three dimensional image processing instead of two dimensional flat display and various researches on display using hologram makes up for the difficulty in three dimensional display using typical flat display. In this study the Lenticular Screen Printing method is presented so that it can be applicable to organic semiconductor display devices and makes possible three dimensional display using flat display for complement the drawback of inorganic semiconductor.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.4
• /
• pp.31-36
• /
• 2012

The high thrust of the linear motor in the exposer generates the high temperature heat by the friction and the electromagnetic forces on its coil. It can cause the thermal deformation and the accuracy of the equipment is finally decreased which has a bad effect on the productivity. In this research, the heat and flow on the linear motor of the exposer has been analyzed. The existing equipment is non-contact fluid refrigerant type. The numerical analysis data of the existing equipment have been acquired and the reliability of the data has been verified. The revised modeling for the next-generation is suggested for cooling the exposer effectively.

• Journal of the Semiconductor & Display Technology
• /
• v.6 no.3
• /
• pp.25-33
• /
• 2007

A computationally efficient and accurate Monte Carlo (MC) simulator of electron beam lithography process, which is named SCNU-EBL, has been developed for semiconductor nanometer pattern design and fabrication. The simulator is composed of a MC simulation model of electron trajectory into solid targets, an Gaussian-beam exposure simulation model, and a development simulation model of photoresist using a string model. Especially for the trajectories of incident electrons into the solid targets, the inner-shell electron scattering of an target atom and its discrete energy loss with an incident electron is efficiently modeled for multi-layer resists and heterogeneous multi-layer targets. The simulator was newly applied to the development profile simulation of ZEP520 positive photoresist for NGL(Next-Generation Lithography). The simulation of ZEP520 for electron-beam nanolithography gave a reasonable agreement with the SEM experiments of ZEP520 photoresist.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1083-1088
• /
• 2008

The first task for the development of a train system is to define the system and to determine its requirements. Reliability target is one of the requirements defined in the system requirements. In railway applications it is advised to follow the procedures given in IEC 62278 to fulfill reliability requirements. The reliability requirements are derived from the customer's needs. The way in which the system requirements reflect the customer's needs is strongly dependent on the characteristics of the product. In general the customer of commercial trains presents the system requirements from their needs. However, the relation between the customer and supplier is equivocal for a project to development a prototype train, and the reliability program should be different from that of an usual commercial project. This paper deals with the reliability management and assessment plan carried out for the on-going "Next generation high-speed train development project".

• Journal of the Society of Naval Architects of Korea
• /
• v.45 no.4
• /
• pp.396-402
• /
• 2008

As demands for high speed sea transportations have recently been increased, various high speed ships appear. Among them the WIG is believed to be one of the next generation of the sea transportation system. Test flight of the 20 seaters WIG craft, Haenarae-X1, developed by MOERI was a success in August, 2007. Development of the large WIG is now ongoing, and it is expected to be commercialized in the near future. In this study we designed a remote controled WIG Craft and carried out its performance test in order to establish engineering design procedures of an Unmanned WIG (U-WIG) craft.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1994.03a
• /
• pp.23-52
• /
• 1994

The development if separation technology is an important research subject as is clear from its role in the Japanese government's research abd development program for basic technology for the next generation (1981~1990). Japan is poor not only in mineral resources but also in energy resources and if a sudden change occurs in oil producing facility or an accident occurs in a nuclear power plant, then energy policy must undergo changes and economic foundations may collapse. Japan has already experienced this. Although, oil prices are stable at present and Japan can import oil at low cost due to the yen appreciation, Japan needs to promote development work for any new energy crisis that may come in the future. This has been the motive for gas separation membrane development in Japan.

• ETRI Journal
• /
• v.37 no.6
• /
• pp.1055-1064
• /
• 2015

We demonstrate a next-generation high-capacity mobile fronthaul based on radio over fiber (RoF) technology, which links between a digital unit and a radio unit supporting two frequency assignments and $2{\times}2$ multiple input, multiple output antennas. To confirm the technical feasibility of a mobile fronthaul, we experimentally investigate its down- and uplink end-to-end performances including the optical and radio frequency (RF) signal path. Frequency-dependent performance deviations, error vector magnitude variations, overall system performance variations caused by optical to electrical conversion, and intermediate frequency to RF conversions are examined. Experimental verifications on multiple LTE uplink signals are performed for the first time. We also demonstrate several commercial mobile Internet services, YouTube video streaming, and file transfers using off-the-shelf mobile devices, through a mobile fronthaul based on RoF.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.57-60
• /
• 2004

Next generation wireless network is evolving toward IP-based network that can various provide multimedia services. A challenge in wireless mobile Internet is support of quality of service over wireless access networks. DiffServ architecture is proposed for evolving wireless mobile Internet. In this paper we propose an algorithm for optimal buffer partitioning which requires the minimal channel capacity to satisfy the QoS requirements of input traffic. We used a partitioned buffer with size B to serve a layered traffic at each DiffServ router. We consider a traffic model with a single source generates traffic having J $(J\geq2)$ quality of service (QoS) classes. QoS in this case is described by loss probability $\varepsilon_j$. for QoS class j. Traffic is admitted or rejected based on the buffer occupancy and its service class. Traffic is generated by heterogeneous Markov-modulated fluid source (MMFS).

• Advanced Composite Materials
• /
• v.17 no.3
• /
• pp.215-224
• /
• 2008

The present study aims to design a multilayer microstrip antenna with composite sandwich construction and investigate fatigue behavior of this multilayer SAS (surface antenna structure) that was asymmetric sandwich structure for the next generation of structural surface technology. This term, SAS, indicates that the structural surface becomes an antenna. Constituent materials were selected considering electrical properties, dielectric constant and tangent loss as well as mechanical properties. For the antenna performance, antenna elements inserted into structural layers were designed for satellite communication at a resonant frequency of 12.2 GHz. From electrical measurements, it was shown that antenna performances were in good agreement with design requirements. In cyclic 4-point bending, flexure behavior was investigated by static and fatigue test. Fatigue life curve of the SAS was obtained. The experimental results of bending fatigue were compared with single load level fatigue life prediction equations and in good agreement. The SAS concept is can be extended to give a useful guide for manufacturers of structural body panels as well as antenna designers.

• Journal of the Korean Home Economics Association
• /
• v.38 no.2
• /
• pp.57-64
• /
• 2000

This study is applied to the Erikson's concept of generative fathering that meets the needs of the next generation and investigated the relationship between generative fathering and the attachment security. Sixty-five of 30-36 months old children (37 boys and 28 girls) and their parents participated in this study. Fathers completed the questionnaire of parental generativity, which include items on their support of physical development, social-emotional development and intellectual development. Children's attachment was reported by mothers using the Attachment Q-set. Results revealed that father's parental generativity was noted as 3.09 in 1 to 5 child rearing activities. But the results showed that there was a significant difference in child's sex and child's birth order. Also, it was found that children's secure attachnent to their fathers was not high. There was an association between fathering generativity and children's secure attachment. This findings imply that father's active child rearing participation will increase children's secure attachment.