• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.37-42
• /
• 2001

A computerized axial flow fan design system is developed with the capabilities for predicting the aerodynamic performance and the noise characteristics of fan. In the present study, the basic fan blading design is made by combining vortex distribution scheme with camber line design, airfoil selection, blade thickness distribution and stacking of blade elements. With the designed fan blade geometry, the through-flow field and the performance of fan are analyzed by using the streamline curvature computing scheme with spanwise total pressure loss and flow deviation models. Fan noise is assumed to be generated due to the pressure fluctuation induced by wake vortices of fan blades and to radiate as dipole distribution. The vortex-induced fluctuating pressure on blade surface is calculated by combining thin airfoil theory and the predicted flow field data. The predicted performances, sound pressure level and noise directivity patterns of fan by the present method are favorably compared with the test data of actual fans. Furthermore, the present method is shown to be very useful in designing the blade geometry of new fan and optimizing design variables of the fan to achieve higher efficiency and lower noise level.

• Structural Engineering and Mechanics
• /
• 제77권1호
• /
• pp.137-149
• /
• 2021

In engineering design, the axial equivalent elastic modulus of laminated FRP pipe was mostly calculated by the average elastic modulus method or the classical laminated plate theory method, which are based on relatively simplified assumptions, and may be not accurate enough sometimes. A new analytical calculation method for the axial equivalent elastic modulus of laminated FRP pipe was established based on three-dimensional stress state. By comparing the results calculated by this method with those by the above two traditional analytical methods and the finite element method, it is found that this method for the axial equivalent elastic modulus fits well not only for thin-walled pipes with orthotropic layers, but also for thick-walled pipes with arbitrary layers. Besides, the influence of the layer stacking on the axial equivalent elastic modulus was studied with this method. It is found that a proper content of circumferential layer is beneficial for improving the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers, and then can reduce its material quantity under the premise that its axial stiffness remains unchanged. Finally, the meso-mechanical mechanism of this effect was analyzed. The improving effect of circumferential layer on the axial equivalent elastic modulus of the laminated FRP pipe with oblique layers is mainly because that, the circumferential fibers can restrain the rigid body rotations of the oblique fibers, which tend to cause the significant deformations of the pipe wall units and the relatively low axial equivalent elastic modulus of the pipe.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권2호
• /
• pp.19-30
• /
• 2012

사회적 생활 환경이 향상되고 도시개발이 안정화됨에 따라 신규 주택건설공사에 대한 요구는 점진적으로 감소하고 있다. 이에, 신축 보다는 정비를 통해 구조물의 사용수명을 연장시키는 리모델링의 중요성이 강조되고 있으며, 이와 관련된 많은 연구들이 진행중에 있다. 그러나 국내의 경우 리모델링 해체공사를 위한 구조해석 관련 기준이 미흡한 실정이다. 국내 보고된 리모델링 해체 공사도중에 발생한 사고중 슬래브 붕괴사고는 다수를 차지하고 있으며, 대형사고로 발전할 수 있는 위험성을 내포하고 있어 리모델링 해체공사에 적용할 수 있는 구조해석 관련 기준의 개발은 중요하면서도 시급하다. 슬래브의 경우 하중을 직접적으로 저항하기 때문에 균열에 취약해 질수 있고 균열이 발생할 경우 리모델링의 근본취지에 어긋남과 동시에 붕괴사고의 원인이 될 수 있으므로, 초기균열을 억제함은 상당히 중요하다고 볼 수 있다. 따라서 이 연구는 슬래브 구조물의 초기균열을 억제하기 위한 기준을 마련하기 위한 기초자료를 제공하기 위해 수행되었다. 슬래브 구조물의 구조적 거동과 관련된 주요 요소로는 구조물의 형상과 구조물에 작용하는 하중이 있다. 슬래브 구조물의 형상과 작용하중과의 상호관계를 파악하기 위해 국내 아파트 평면도를 분석하였으며, 해체잔해물의 단위중량, 콘크리트 강도 등과 관련된 자료를 분석하였다. 분석결과를 활용하여 유한요소해석을 실시하였으며, 유한요소해석결과 주요 하중요소인 해체잔해물의 적재제한높이 및 적재방법에 대해 검토할 수 있었다. 또한, 소형해체장비의 이동에 따른 슬래브의 구조적 거동을 파악하기 위해 동적, 정적 재하실험을 실시하였으며, 실험결과 이동하중에 따른 충격의 영향을 반영할 수 있는 충격계수를 결정할 수 있었다.

• Composites Research
• /
• 제18권4호
• /
• pp.52-58
• /
• 2005

사이클로콥터는 회전축에 평행하게 회전하는 블레이드로 구성된 사이클로이드 블레이드 시스템으로부터 추력을 얻는 수직이착륙 무인기이다. 본 논문에서는 공기역학을 고려한 최적 설계를 통해 결정된 형상을 갖는 사이글로콥터 로터에 대해서 구조적 관점에서 최적 설계를 수행하였다. 복합재료 블레이드의 적층각, 적층수와 스파 위치 등을 설계 변수로 하여 MSC/NASTRAN을 이용한 해석을 통해 데이터베이스를 구축하고, 반응면 기법 등에 의해서 최적의 조합을 결정하였다. 최적 설계된 블레이드와 복합재료로 구성된 허브암을 포함하는 로터에 대해, 정적 해석을 수행하여 각 요소가 허용 응력 이내의 값을 가짐을 확인하였고, 동적 해석을 통해 주요 저차 모드가 로터 회전과 불일치하게 함으로써 공진의 가능성을 없앴다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.771-774
• /
• 2000

RP techniques have inherent disadvantages caused by their working principles: stair-stepped surface of parts due to layer-by-layer stacking of layers, low build speed caused by line-by-line solidification to finish one layer, and post processing to improve surface finish, etc. The objective of this study is to propose a new RP technique, variable deposition manufacturing (VDM), which can make up for the disadvantages of the existing RP techniques, and to develop an apparatus to implement the technique. The proposed process can greatly reduce the building time and improve the surface finish of parts generated. The experiments are carried out to obtain the range of temperature of molten material to maintain its fluidity and to investigate the effect of gas cooling on the preservation of the slopes. Based on the results, some simple shapes such as a line-shape. an S-shape, and a circle-shape were fabricated from Ethylene Vinyl Acetatecopolymer (EVA). In order to examine the applicability of VDM to more general shapes, a tensile specimen and a yo-yo shape were manufactured by the proposed RP method using EVA material as the first trial approach. The present basic study has shown the possibility of a practicable utilization of the proposed VDM process to prototyping of a general three-dimensional shape.

• 한국재료학회지
• /
• 제14권6호
• /
• pp.413-419
• /
• 2004

Recently, Silicon On Insulator (SOI) devices emerged to achieve better device characteristics such as higher operation speed, lower power consumption and latch-up immunity. Nevertheless, there are many detrimental defects in SOI wafers such as hydrofluoric-acid (HF)-defects, pinhole, islands, threading dislocations (TD), pyramid stacking faults (PSF), and surface roughness originating from quality of buried oxide film layer. Although the number of defects in SOI wafers has been greatly reduced over the past decade, the turn over of high-speed microprocessors using SOI wafers has been delayed because of unknown defects in SOI wafers. A new characterization method is proposed to investigate the crystalline quality, the buried oxide integrity and some electrical parameters of bonded SOI wafers. In this study, major surface defects in bonded SOI are reviewed using HF dipping, Secco etching, Cu-decoration followed by focused ion beam (FIB) and transmission electron microscope (TEM).

• Structural Engineering and Mechanics
• /
• 제17권6호
• /
• pp.751-766
• /
• 2004

This paper extends the use of the hierarchic degenerated shell element to geometric non-linear analysis of composite laminated skew plates by the p-version of the finite element method. For the geometric non-linear analysis, the total Lagrangian formulation is adopted with moderately large displacement and small strain being accounted for in the sense of von Karman hypothesis. The present model is based on equivalent-single layer laminate theory with the first order shear deformation including a shear correction factor of 5/6. The integrals of Legendre polynomials are used for shape functions with p-level varying from 1 to 10. A wide variety of linear and non-linear results obtained by the p-version finite element model are presented for the laminated skew plates as well as laminated square plates. A numerical analysis is made to illustrate the influence of the geometric non-linear effect on the transverse deflections and the stresses with respect to width/depth ratio (a/h), skew angle (${\beta}$), and stacking sequence of layers. The present results are in good agreement with the results in literatures.

• 대한의용생체공학회:의공학회지
• /
• 제28권4호
• /
• pp.520-529
• /
• 2007

An efficient method for implementing image reconstruction algorithms for Compton cameras is presented. Since Compton scattering formula establishes a cone surface from which the incident photon must have originated, it is crucial to implement a computationally efficient cone-surface integration method for image reconstruction. In this paper we assume that a cone is made up of a series of ellipses (or circles) stacked up one on top of the other. In order to reduce computational burden for tracing ellipses formed by the intersection of a cone and an image plane, we propose a new method using a series of imaginary planes perpendicular to the cone axis so that each plane contains a circle, not an ellipse. In this case the cone surface integral can be performed by simply accumulating the circles along the cone axis. To reduce the computational cost of tracing circles, only one of the circles in the cone is traced and the rest are determined by using simple trigonometric ratios. For our experiments, we used the three different schemes for tracing ellipses; (i) using the samples generated by the ellipse equation, (ii) using the fixed number of samples along a circle on the imaginary plane, and (iii) using the fixed sampling interval along a circle on the imaginary plane. We then compared performance of the above three methods by applying them to the two reconstruction algorithms - the simple back-projection method and the expectation-maximization algorithm. The experimental results demonstrate that our proposed methods (ii) and (iii) using imaginary planes significantly improve reconstruction accuracy as well as computational efficiency.

• Composites Research
• /
• 제12권4호
• /
• pp.42-54
• /
• 1999

섬유-금속 적층 복합재료(FMLC)는 섬유와 금속 박판으로 구성된 새로운 형태의 구조재로 가볍고 우수한 피로 특성을 가지며 금속과 같이 가소성과 충격저항성이 우수하고, 가공성이 뛰어나다. 본 연구에서는 여러 하중 조건하에 있는 섬유-금속 적층 복합재료를 유전자 알고리듬을 이용하여 최적 설계하였다. 전단변형이론에 근거한 유한요소법을 사용하여 적층판을 해석하였으며, 설계변수로 금속판의 강도와 섬유 층의 수에 따른 적층각도를 두었다. 섬유층과 금속판의 적합도 함수로는 각각 Tasi-Hill failure criterion과 Miser yield criterion을 사용하였다. 유전자 알고리듬의 연산자로는 토너먼트 선택과 균일 교배를 사용하였다. 효율적인 진화를 위해 엘리티스트 모델을 사용하며, 높은 정확도를 가진 해를 얻기 위해 크리프 무작위 탐색(creeping random search) 방법을 통해 더 우수한 자손을 얻었다. 여러 가지 하중 조건에 대하여 최적설계 결과를 나타내었으며, 파괴 지수 측면에서 탄소섬유강화복합재료(CFRP)와 비교하였다. 해석 결과 섬유-금속 적층 복합재료는 탄소섬유강화복합재료에 비하여 집중하중이나 분포하중 형태에 대하여 우수한 특성을 보였으며, 파괴 지수의 편차가 적어 예기치 않은 하중에 잘 견딜 것으로 사료된다.

• 한국인쇄학회지
• /
• 제23권1호
• /
• pp.77-97
• /
• 2005

Organic light-emitting diodes(OLEDs) have received considerable attention since they were first reported by Tang. Novel organic fluorescent materials have been reported on synthesis and application of new organic light-emitting materials. Despite of much recent progress, fabrication of full-color OLEDs still remained to be done. Many method have been proposed to full-color OLEDs displays such as using separated red, green and blue emitters, stacking separate rad, green and blue emitter, using a white emitter with individually pattered color filters, microcavity structures and using a blue emitter with individually patterned fluorescent materials. The last method has much attention because of easy fabrication of OLEDs and low-priced fabrication. This paper reports the optical and electrical characteristics of OLEDs using novel molecules containing biphenyl structure. Optical properties of biphenyl derivatives doped with poly(9-vinyl carbazole)(PVK) are measured and found Forster energy transfer process in the blends. And devices were fabricated as ITO/PEDOT/PVK doped with biphenyl derivatives/$Alq_3$/Li:Al and I-V-L characteristics and EL efficiency of devices were examined.