• Advances in concrete construction
• /
• v.10 no.4
• /
• pp.301-310
• /
• 2020

The following paper concentrates on the objective of studying the influences of extent of duration and temperature on the Pozzolanic properties as well as reactivity of locally existing natural clay of Nai Gaj, district Dadu, Sindh Pakistan. The activation of the clay only occurs through heating when temperature in a furnace chamber reaches 600, 700 and 800oC for 1, 2 and 3 hours and at 900 and 1000℃ for 1 and 2 hours. Furthermore, the strength activity index (SAI) of advanced pozzolanic material happens to be identified through 20% cement replacement for different samples of calcined clay as per ASTM C-618. The compressive strength test of samples had been operated for 7 and 28-days curing afterwards. The maximum compressive strength had been seen in mix E in which cement was replaced with clay calcined at 700℃ for 1 hour that is 27.05 MPa that is 24.31% more than that of control mix. The results gathered from the SAI verdicts the optimal activation temperature is 700℃ within a one-hour time period. The SAI at a temperature of 700℃ with a one-hour duration at 28 days is 124.31% which happens to satisfy the requirements of the new Pozzolanic material, in order to be applied in mortar/concrete (i.e., 75%). The Energy- dispersive spectrometry (EDS) along with the X-ray diffraction (XRD) have been carried out in means of verifying whether there is silica content or amorphous silica present in metakaolin that has been developed. The findings gathered from the SAI were validated, as the analysis of XRD verified that there is in fact Pozzolanic activity of developed metakaolin. Additionally, based on observation, the activated metakaolin holds a significant influence on the increase in mortar's compressive strength.

• The Journal of the Korea Contents Association
• /
• v.13 no.3
• /
• pp.435-443
• /
• 2013

While rural highways carry on lower traffic volumes, the deviations of running speeds between vehicles appear to be higher on rural highways than urban highways. The speed characteristic of rural highways is adding to pedestrian-related accidents which occur on a crosswalk with poor sight distance due to the limits of car headlights and lighting. Specially, the aged was mostly occupied in nighttime-related accidents on crosswalks, and pedestrians crossing on the far side of approaching vehicles appear to have the probability of fatality higher than the near side. An alternative is needed to resolve the compounded accidents, and then this study is to establish a new approach to an optimum lighting environment on a crosswalk to improve pedestrian safety. This study was conducted by a survey and a field study on the lighting of existing crosswalks. The field study shows that the existing lighting has the problem of wasting energy and impeding walking due to glare. The survey shows that nighttime sight distance on a crosswalk is required to improve and that road users prefer to be brighter pedestrian waiting space together with the crosswalk. Thus, a lighting environment that is not too bright and illuminates the crosswalk and the pedestrian waiting space is needed to implement.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.13 no.2
• /
• pp.48-55
• /
• 2011

Solar radiation components reflected by the sea surface ($R_{ss}\uparrow$) are additional energy sources comprising the solar radiation regime. Previous studies, based on observational approaches, indicated that $R_{ss}\uparrow$ is an available climatological resource. However, an estimation process for $R_{ss}\uparrow$ has not been established. In this case study over Jeju Island in South Korea, we applied a new estimation process to solar radiation modeling and discussed the spatial distribution of $R_{ss}\uparrow$ and its seasonal variation. Our results showed that the illuminated area and the intensity of $R_{ss}\uparrow$ became greatest at the winter solstice and least at the summer solstice. We estimated the illuminated area of $R_{ss}\uparrow$ as it expanded over the southern slope of Jeju Island. At the winter solstice, on a daily basis, the area and intensity of illumination by $R_{ss}\uparrow$ were $182.3km^2$ and $0.41\;MJ\;m^{-2}\;day\;{-1}$, respectively. Comparing the daily accumulative and instantaneous values of $R_{ss}\uparrow$ intensity, the difference was about 20 times greater in daily cases than in instantaneous cases. On the other hand, for instantaneous values, the $R_{ss}\uparrow$ intensity accounted for up to 33% of the three components, i.e., direct, diffuse and reflected radiation in winter solstice. In addition, it was estimated that the sea surface reflectance depended on the wind speed. Therefore, in a practical use of this revised model, wind conditions should be considered as a critical factor in estimating $R_{ss}\uparrow$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.1
• /
• pp.25-33
• /
• 2018

Renewable energy has been of interests in the area of modern alternative fuels. Biogas is produced in waste landfill sites through anaerobic digestion processes, including hydrolysis, acidogenesis, organic acid fermentation (acetogenesis), and methane fermentation (methanogenesis). High contents of fine dust and moisture limited its utilization for direct combustion, town gas and vehicle fuel. Thus, this study proposed a new design for a cooling device using a centrifugal cyclone for simultaneous removal of fine dust and moisture as a pretreatment in the purification processes. A heat exchanger and an ID fan, which are installed inside and outside of the cyclone, in order to cool the humid gas below the freezing point and form a foggy mist. Such an atmosphere enhanced to capture fine dust as recirculating the cold mist flow. The water removal rate was 80.8% at a relative humidity of 95%, and the particle removal efficiency was 98.3% for $2.5{\mu}m$. Simultaneous removal efficiency was 70.8% and 99.6% for particle and moisture respectively.

• Journal of Advanced Navigation Technology
• /
• v.6 no.3
• /
• pp.195-202
• /
• 2002

Recently, as the range of mobile communication services is extended, the interference between adjacent base-stations is increased. Nowdays, one of the important factors causing interference is IMD (Inter-Modulation Distortion) problems. Not only active IMD but also passive IMD effects must be considered to design a CDMA system. In this study, we design and implement 7/16" DIN connectors which have a various intensity of surface illumination, thickness and quality of plating material to analyze the effects of PIMD. And propose the methods for improving the PIMD characteristics: First, it is more profitable to use the metal which has good intensity of surface illumination where most of all electric currents passes through it. Secondly, we should plate metals more than $5{\mu}m$ for RF energy enough to propagate in a medium. Thirdly, it is necessary to select a metal having high conductivity and specific heat to protect the aging phenomenon of plate material. And it is required to develop a new plating material to replace the current materials, such as the alloy of three components for cost reduction. We have to know that the plate which has intensity of surface illumination 6 S and the thickness of plating material $5{\mu}m$ satisfy the domestic PIMD specification (KTF) -150 dBc, regardless of the plate material in case of 7/16" DIN connector.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.12
• /
• pp.6159-6166
• /
• 2012

A discharge measurement is difficult in flood season which is especially important in the water resources field and the continuous discharge measurement for all rivers is impossible on the present system. So, the stage-discharge curve has been used for a long time to produce discharge data of rivers. However, there has been problems from a reliability angle due to the fact that this method uses only stage-discharge relationship, although the stage-discharge curve has the convenience. Therefore, a new mean velocity equation was derived by using Chiu's 2D velocity formula of the entropy concept in this paper. The derived equation reflected hydraulic characteristics such as the depth, gravity acceleration, hydraulic radius, energy slope, kinematic coefficient of viscosity, etc. and estimated also a maximum velocity. In addition, this method verified the relationship between a mean and maximum velocity and estimates an equilibrium state ${\phi}(M)$ well presenting properties of a river cross section as the results. The mean velocity was estimated by using the equilibrium state ${\phi}(M)$, and then the discharge was estimated. To prove this equation to be accurate, the comparison between the measured and estimated discharge is conducted by using the measured laboratory data in the unsteady condition flow showing loop state and the results are consistent. If this study is constantly carried out by using various laboratory and river data, this method will be widely utilized in water resources field.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.3
• /
• pp.1288-1295
• /
• 2012

Korea Ministry of Knowledge Economy has estimated that wind power (WP) will be occupied 37% in 2020 and 42% in 2030 of the new energy sources, and also green energies such as photovoltaic (PV) and WP are expected to be interconnected with the distribution system because of Renewable Portfolio Standard (RPS) starting from 2012. However, when a large scale wind power plant (over 3[MW]) is connected to the traditional distribution system, protective devices (mainly OCR and OCGR of re-closer) will be occurred mal-function problems due to changed fault currents it be caused by Wye-grounded/Delta winding of interconnection transformer and %impedance of WP's turbine. Therefore, when Double-Fed Induction Generator (DFIG) of typical WP's Generator is connected into distribution system, this paper deals with analysis three-phase short, line to line short and a single line ground faults current by using the symmetrical components of fault analysis and PSCAD/EMTDC modeling.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.2
• /
• pp.697-703
• /
• 2017

This paper examines the flexure behavior of FRP-concrete composite structure that can replace conventional reinforced concrete structure types. In order to investigate the structural performance and behavioral characteristics in numerical analysis means, ABAQUS, a general purpose finite element analysis program, was utilized for nonlinear finite element analysis, and the various variables and their influences were analyzed and compared with experimental results to suggest values optimized to this composite structure. The concrete damage plasticity model and Euro code for concrete were used. In the implicit finite element analysis, the convergence was ambiguous when geometrical and material nonlinearity were large, so the explicit finite element analysis used in this study was deemed to be appropriate. From the comparison with the experiment about concrete damaged plasticity model, 20mm for the mesh size, $30^{\circ}$ for the dilation angle, $100Nmm/mm^2$ for the value of fracture energy, 0.667 for Kc value, and the consideration of damage parameter were suggested believed to be appropriate. The numerical model suggested in this study was able to imitate the ultimate load and cracking pattern very well; therefore, it is expected to be utilized in research of various new material composite structures.

• Environmental and Resource Economics Review
• /
• v.21 no.3
• /
• pp.595-625
• /
• 2012

Recently environment-friendly pellet boilers have interests as emissions of greenhouse gases are regulated internationally and energy security becomes more important to oil addicted countries including Republic of Korea. But the Korean market for pellet boilers is on the initial stage due to the high production costs relative to other conventional boilers. Hence the Korean government has supported financially and promoted the pellet boiler business. In this sense, it would contribute market stratergy and effective promotion policy for both of the government and private companies if we can forecast market shares of pellet boilers appropriately. For this purpose, this study surveyed potential consumers' preferences on pellet boilers among various alternatives using a choice experiment reflecting intangible costs. As the market share of new technology increases, intangible costs decline. According to different intangible cost scenarios, we experimented people's preferences on oil, gas, electric, and pellet boilers. A multinomial logit model was employed to estimate coefficient parameters of common attributes for various alternative boilers. Based on the estimates, we forecasted market shares of individual boilers. We found that as intangible costs decline, the market share of pellet boiler increase substantically while market shares of electric and gas boilers decrease dramatically. The market share of oil boiler did not change significantly. Meanwhile, as people are more rich, more educated, and exposed to advertisement on pellet boilers, the likelihood of choosing the pellet boiler increases.

• Applied Biological Chemistry
• /
• v.38 no.4
• /
• pp.359-363
• /
• 1995

New ten N-[1-(benzotriazol-1-yl)alkyl]aniline(4) derivatives were synthesized and the crystal structure of 4h was shown by X-ray crystallography and the absolute configuration has been assigned as S form. The molecule crystallizes in the monoclinic system, space group $P2_{1}/n$. And the molecules in the crystal are linked with each other through the hydrogen bond $(N_{11}-H_{11}{\cdots}N3)$ with distance $2.300(11){\AA}$ The fungicidal activity($pI_{50}$) in-vitro against Botrytis cineria (BC), Phytophthora casici (PC) and Sclerotium cepinorum (SC) were determined by the agar dilution method. The structure activity ralationships (SAR) between structure of 4 and the activity were studied using a physicochemical parameters of substituents and multiple regression technique. Among these compounds, only the bromo group substituent(4f) showed higher activity, which depend on the hydrophobic(${\pi}$) of substituents. The relative orders of the activity are SC>BC> and PC, respectively. This implies that the activity is affected by the hydrophobic(${\pi}$) nature of the Z group rather than the X group. Linear free energy relationships(LFER) on the fungicidal activity with substituents has been also discussed.