• Structural Engineering and Mechanics
• /
• 제65권2호
• /
• pp.203-211
• /
• 2018

This paper introduces the development process of NCC(New Concrete Cutting) system and analyzes first verification test. Based on the first verification test results, some problems of NCC system have been newly modified. We carry out the second verification test. We tried to verify cutting performance and dust control efficiency of NCC system through the cutting test of concrete bridge piers. In particular, this verification test strives to solve the problem of concrete dust, which is the biggest problem of dry cutting method. The remaining dust problems in cutting section tried to solve through this verification test. This verification test of the NCC system shows that the dust problem of dry cutting method is closely controlled and solved. In conclusion, the proposed NCC method is superior to the dry cutting method in all aspects, including cutting performance, dust vacuum efficiency and cooling effect. The proposed NCC system is believed to be able to provide eco-friendly cutting technology to various industries, such as the removal of the SOC structures and the dismantling of nuclear plants, which have recently become a hot issue in the field of concrete cutting.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 춘계학술대회 논문집
• /
• pp.595-598
• /
• 2000

This paper presents new cutting force measuring system for milling process. Usually, tool dynamometer is the most appropriate measuring tool in an analysis of cutting mechanism. High price and limited space, however, make it difficult to be in-situ system for controllable milling process. Although an alternative using AC current of servomotor has been suggested, it is unsuitable for cutting force control because of low bandwidth and noise. We suggest new cutting force measuring system, using two load cell placed between moving table and nut of ballscrew, and modelled on the system statically and dynamically. And to verify the accuracy of the proposed system, a series of carefully conducted experiments were carried out. Experiment results show that models are in reasonably good agreement with the experiment data.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.666-675
• /
• 1993

In order to prevent bodily injuries frequently suffered in using bush cutters, especially from spattered stones, we developed a unique new cutting system equipped with a fixed blade on top of the rotary blade, and checked into the mowing performance of the cutter. From experimental test of mowing efficiency and measuring test of physical stress (O$_2$ consumption and heartbeat rates) , the new cutting system with a fixed blade proved that it keeps good cutting performance with lower peripheral speed of the rotary blade(22m/sec), compared to that of ordinary cutting blade, yielding more safety in operation. Weight of the cutter head is, however, heavier than that of ordinary machine by about 70% which increased a physical stress on the operator with slightly faster heartbeat rates. In mowing along edge of concrete wall, the operator enjoyed using the cutter with no anxiety , owing to function of the fixed blade.

• 대한기계학회논문집
• /
• 제13권4호
• /
• pp.611-617
• /
• 1989

본 연구에서는 제트 분사 시스템을 제작하여 절단 성능에 관게하는 여러 변수중 고압수의 압력, 연마제의 크기 및 공급량, 그리고 공작물의 이송속도의 영향을 실험적으로 연구하였다.

• 산업공학
• /
• 제15권3호
• /
• pp.308-315
• /
• 2002

This study presents the web based cutting parameter selection system using Group Technology (GT). The GT is basically applied to classify and code the work material and cutting process which are main factors to affect cutting parameter selection. The proposed system has been designed to electronically select proper cutting conditions based on the stored GT database. The existing approaches used in most small and medium sized companies are basically to use manufacturing engineer's experience or to find the recommended values from the manufacturing engineers handbook. These processes are often time consuming and inconsistent, especially when a new engineer is involved. Consequently, the proposed system could automatically and consistently generate the proper cutting conditions (feed, depth of cut, and cutting speed) as soon as relatively simple data input is given thanks to the classified GT database.

• 대한기계학회논문집
• /
• 제1권2호
• /
• pp.89-94
• /
• 1977

So far, high accuracy in-process sensors have been used for controlling the cutting tool, but the method followed in this new system is guite different form previous processes. In this system, after the rough cut the mark indication the pasition of the finished size in put on the cutting surface of the workpiece by ultrasonic or vibration cutting. The cutting is then continued until the mark just disappears, This position being observed by the used of a simple in-proces sensor, The in-prosess sensor in used only to detect the existence or dis apperance of the mark.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.173-178
• /
• 1995

This paper presents a new method to obtain parameters of end-mill cutting system. For high speed milling and precision surface finish, we have to predict the deflection of tool and the critical depth of cut. The cutting system can be modeled to a vibratory system to obtain the deflection of tooll and the critical depth of cut. A new method of the modeling of one degree of freedom system was developed using bisection method, ARMA(Autoregressive Moving average) and impact test.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.928-933
• /
• 2004

A new approach for modelling and simulation of the cutting forces in end milling processes is presented. In this approach, the cutting forces in end milling are modelled based on a predictive machining theory, in which the machining characteristic factors are predicted from input data of fundamental workpiece material properties, tool geometry and cutting conditions. In the model, each tooth of a end milling cutter is divided into a number of slices along the cutter axis. The cutting action of each of the slices is modelled as an oblique cutting process. For the first slice of each tooth, it is modelled as oblique cutting with end cutting edge effect, whereas the cutting actions of other slices are modelled as oblique cutting without end cutting edge effect. The cutting forces in the oblique cutting processes are predicted using a predictive machining theory. The total cutting forces acting on the cutter is obtained as the sum of the forces at all the cutting slices of all the teeth. A Windows-based simulation system for the cutting forces in end milling is developed using the model. Experimental milling tests have been conducted to verify the simulation system.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.53-60
• /
• 2001

Water jet cutting is a new technology using very high pressure water as a cutting tool. Water jet cutting system consists of water preparation part, pressure generation pate, cutting head, and motion part. A PC-based numerical controlled (PC-NC) X-Y table is developed and water get cutting system is installed thereon. Water jet machining is applicable to various kinds of materials ranging from soft materials such as rubber and meat to hard-to-cut materials such as titanium. This paper shows the application of the abrasive waterjet system to titanium cutting.

• 한국정밀공학회지
• /
• 제15권12호
• /
• pp.212-219
• /
• 1998

During machining of dies and molds with sculptured surfaces. the cutter contact area changes continuously and results in cutting force variation. In order to implement cutting force prediction model into a CAM system, an effective and fast method is necessary. In this paper. a new method is proposed to predict mean cutting force. The cutter contact area in the spherical part of the cutter is obtained using Z-map, and expressed by the grids on the cutter plane orthogonal to the cutter axis. New empirical cutting parameters were defined to describe the cutting force in the spherical part of cutter. Before the mean cutting force calculation, the cutting force density in each grid is calculated and saved to force map on the cutter plane. The mean cutting force in an arbitrary cutter contact area can be easily calculated by summing up the cutting force density of the engaged grid of the force map. The proposed method was verifed through the slotting and slanted surface machining with various inclination angles. It was shown that the mean force can be calculated fast and effectively through the proposed method for any geometry including sculptured surfaces with cusp marks and holes.