• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2001년도 추계학술발표회요약집
• /
• pp.318.2-318
• /
• 2001

• 한국컴퓨터산업학회논문지
• /
• 제8권1호
• /
• pp.9-16
• /
• 2007

본 연구에서는 아스팔트 함량 변화에 따라서 중성자 계측수가 어떻게 변화되는가를 계산하여 법적 규제 면제치인 $100[{\mu}Ci]$이하의 방사성동위원소를 이용한 아스팔트 함량측정기의 기본 설계 자료로 활용하고자한다. 이를 위하여 1차 년도에서 실시했던 설계자료를 활용하여 아스팔트 함량의 변화에 따라 중성자 계측수가 어떻게 증감이 이루어지고, 또한 감속재인 폴리에틸렌 주변에 흡수체인 카드늄판을 설치했을 때의 계측수의 변화를 MCNP 코드를 이용하여 살펴보았다.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.900-906
• /
• 2024

The Passively-Cooled Molten Salt Fast Reactor (PMFR) is one of the advanced design concepts of the Molten Salt Fast Reactor (MSFR) which utilizes a natural circulation for the primary loop and aims to attain a long-life operation without any means of fuel reprocessing. For an extended operation period, it is necessary to have enough fissile material, i.e., high excess reactivity, at the onset of operation. Since the PMFR is based on a fast neutron spectrum, direct implementation of a burnable absorber concept for the control of excess reactivity would be ineffective. Therefore, a localized moderator concept that encircles the active core has been envisioned for the PMFR which enables the effective utilization of a burnable absorber to achieve low reactivity swing and long-life operation. The modified PMFR design that incorporates a moderator and burnable absorber is presented, where depletion calculation is performed to estimate the reactor lifetime and reactivity swing to assess the feasibility of the proposed design. All the presented neutronic analysis has been conducted based on the Monte Carlo Serpent2 code with ENDF/B-VII.1 library.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3516-3525
• /
• 2022

The high capture cross-section (𝜎_c) of Gadolinium (Gd-155 and Gd-157) causes reactivity penalty and swing at the initial stage of fuel burnup in Pressurized Water Reactor (PWR). The present study is concerned with the feasibility of the combination of mixed burnable poison with both low and high 𝜎_c as an approach to minimize these effects. Two considered reference designs are fuel assemblies with 24 IBA rods of Gd₂O₃ and Er₂O₃ respectively. Models comprise nuclear fuel with a homogeneous mixture of Er₂O₃, AmO₂, SmO₂, and HfO₂ with Gd₂O₃ as well as the coating of PaO₂ and ZrB₂ on the Gd₂O₃ pellet's outer surface. The infinite multiplication factor was determined and reactivity was calculated considering 3% neutron leakage rate. All models except Er₂O₃ and SmO₂ showed expected results namely higher values of these parameters than the reference design of Gd₂O₃ at the early burnup period. The highest value was found for the model of PaO₂ and Gd₂O₃ followed by ZrB₂ and HfO₂. The cycle burnup, discharge burnup, and cycle length for three batch refueling were calculated using Linear Reactivity Model (LRM). The pin power distribution, energy-dependent neutron flux and Fuel Temperature Coefficient (FTC) were also studied. An optimization of model 1 was carried out to investigate effects of different isotopic compositions of Gd₂O₃ and absorber coating thickness.

• Journal of Radiation Protection and Research
• /
• 제26권2호
• /
• pp.67-71
• /
• 2001

극저준위 방사능측정시스템의 백그라운드에 영향을 주는 중성자를 차폐하기 위한 차폐체를 설계하였다. 중성자 차폐방법은 고 밀도 폴리에틸렌을 이용하여 고속중성자를 감속한 후 $B_4C$를 이용하여 감속된 열중성자를 흡수하는 방법을 이용하였다. 몬테카를로 모사방법인 MCNP4B 코드를 이용하여 계산한 결과 고 밀도 폴리에틸렌의 두께가 10 cm 일 때 열중성자속이 최대가 되는 것으로 나타났으며 감속된 중성자의 흡수는 용제에 자연상태의 $B_4C$ 분말을 30 w% 섞을 경우 2 mm의 두께에서 94%의 중성자 흡수가 일어나는 것으로 나타났다. 또한 몬테카를로 모사를 통한 계산결과의 타당성 여부를 조사하기 위하여 중성자 차폐실험 장치를 제작하여 실험 결과와 비교하였으며, 비교 결과 실험값과 일치하는 것으로 나타났다.

• 콘크리트학회논문집
• /
• 제28권2호
• /
• pp.197-204
• /
• 2016

본 논문에서는 타 재료에 비해 수소 원소 함유량이 높아 고속 중성자 차폐에 유리한 합성 고분자 화합물과 중성자 포획단면적이 큰 붕소화합물을 각각 혼입한 모르타르를 대상으로 중성자 차폐성능을 분석하였다. 합성 고분자 화합물의 종류, 형상, 크기, 함량 및 붕소화합물의 함량에 따라 총 16개 모르타르 배합을 설계하였으며, 각 배합의 슬럼프 플로우, 28일 압축 및 인장강도를 측정하고, 고속 중성자 및 열중성자에 대한 차폐실험을 수행하였다. 합성 고분자 화합물의 선량 투과율은 모르타르 대비 최대 38.5%까지 감소하였으며, 공기 중 선량의 26.3%까지 차폐하였다. 붕소화합물을 혼입한 모르타르의 열중성자 차폐율은 최대 90.3%로 대부분의 열중성자를 차폐하였다. 비록 화합물 혼입에 의해 모르타르의 기본 특성은 저하되었으나, 표면 개질, 특수 혼화제 첨가 등 지속적인 연구를 통하여 성능 저하를 최소화할 수 있을 것으로 판단되며, 중성자 투과성능 역시 다양한 타입의 시험체 조합을 통한 레이어 시스템 도입 등으로 다양한 투과성능에 따른 맞춤형 설계를 제공할 수 있을 것이다.

• Nuclear Engineering and Technology
• /
• 제46권5호
• /
• pp.675-680
• /
• 2014

Pulverization of two different sized micro-$B_4C$ particles (${\sim}10{\mu}m$ and ${\sim}150{\mu}m$) was investigated using a STS based high energy ball milling system. Shapes, generation of the impurities, and reduction of the particle size dependent on milling time and initial particle size were investigated using various analytic tools including SEM-EDX, XRD, and ICP-MS. Most of impurity was produced during the early stage of milling, and impurity content became independent on the milling time after the saturation. The degree of particle size reduction was also dependent on the initial $B_4C$ size. It was found that the STS nanoparticles produced from milling is strongly bounded with the $B_4C$ particles forming the $B_4C$/STS composite particles that can be used as a neutron absorbing nanocomposite. Based on the morphological evolution of the milled particles, a schematic pulverization model for the $B_4C$ particles was constructed.

• Nuclear Engineering and Technology
• /
• 제46권4호
• /
• pp.513-520
• /
• 2014

In this paper, three types of operational and industrial absorbers used at research reactors, including Ag-In-Cd alloy, $B_4C$, and Hf are selected for sensitivity analyses. Their integral effects on the main neutronic core parameters important to safety issues are investigated. These parameters are core excess reactivity, shutdown margin, total reactivity worth of control rods, thermal neutron flux, power density distribution, and Power Peaking Factor (PPF). The IAEA 10 MW benchmark core is selected as the case study to verify calculations. A two-dimensional, three-group diffusion model is selected for core calculations. The well-known WIMS-D4 and CITATION reactor codes are used to carry out these calculations. It is found that the largest shutdown margin is gained using the $B_4C$; also the lowest PPF is gained using the Ag-In-Cd alloy. The maximum point power densities belong to the inside fuel regions surrounding the central flux trap (irradiation position), surrounded by control fuel elements, and the peripheral fuel elements beside the graphite reflectors. The greatest and least fluctuation of the point power densities are gained by using $B_4C$ and Ag-In-Cd alloy, respectively.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2006년도 학술논문요약집
• /
• pp.349-350
• /
• 2006

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2006년도 학술논문요약집
• /
• pp.351-352
• /
• 2006