• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2382-2388
• /
• 2014

To provide network reliability in indoor wireless communication systems, we should resolve the problem of unexpected network failure rapidly. In this paper, we propose an adaptive resource management (ARM) scheme to support seamless connectivity to users. In consideration of system throughput and user fairness simultaneously, the ARM scheme adaptively determines the set of healing channels, and performs scheduling and power allocation iteratively based on a constrained non-convex optimization technique. Through intensive simulations, we demonstrate the superior performance results of the proposed ARM scheme in terms of the average cell capacity and user fairness.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.541-543
• /
• 2000

This paper describes the unified reliability evaluation with partial loss of continuity for complex distribution system. To evaluate reliability considering line limitation of the system, PLOC technique is employed. And reliability indices calculation method is used. Finally, Analytic network process method is employed. As a result, calculating accurate reliability, finding weak points, and expansion scheduling of the system is possible.

• Journal of Korean Society for Quality Management
• /
• v.28 no.1
• /
• pp.105-118
• /
• 2000

In this paper, we consider an interconnection network, DRDT (Dual Receive Dual Transmit), that is a double-loop ring topology and adopts the concept of multiple packets transmission. For three types of DRDT configurations, we investigate some properties related to path sets and discuss the method for finding minimal path sets. Using the concept of the terminal reliability and the path sets approach, we evaluate the reliability of the DRDT networks and compare them with a single ring network and a unidirectional double-loop ring network.

• Journal of Communications and Networks
• /
• v.11 no.5
• /
• pp.445-454
• /
• 2009

Cooperative transmission protocols are always designed to achieve the largest diversity gain and the network capacity simultaneously. The concept of diversity-multiplexing tradeoff (DMT) in multiple input multiple output (MIMO) systems has been extended to this field. However, DMT constrains a better understanding of the asymptotic interplay between transmission rate, outage probability (OP) and signal-to-noise ratio. Another formulation called the throughput-reliability tradeoff (TRT) was then proposed to avoid such a limitation. By this new rule, Azarian and Gamal well elucidated the asymptotic trends exhibited by the OP curves in block-fading MIMO channels. Meanwhile they doubted whether the new rule can be used in more general channels and protocols. In this paper, we will prove that it does hold true in decode-and-forward cooperative protocols. We deduce the theoretic OP curves predicted by TRT and demonstrate by simulations that the OP curves will asymptotically overlap with the theoretic curves predicted by TRT.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.31 no.1
• /
• pp.101-107
• /
• 2008

This paper considers a topological optimization of a computer network design with a reliability constraint. The objective is to find the topological layout of links, at minimal cost, under the constraint that the network reliability is more than a given reliability. To efficiently solve the problem, a scatter search approach is proposed. Two illustrative examples are used to explain and test the proposed approach. Experimental results show evidence that the proposed approach performs more efficiently for finding a good solution or near optimal solution in comparison with a genetic algorithm approach.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.3
• /
• pp.414-416
• /
• 2013

As the usage of the electric power train increases, the importance of the control network between the electric control devices grows. IEC proposed a revision of IEC-61375, a standard of the networking among electric devices within a train, to adopt Ethernet as a backbone of train network. This paper performed the reliability analysis of three configurations of Ethernet-based networking within a electric power train that are recommended in IEC-61375 standard. The analysis results show that MTTF(mean time to failure) of the redundant configuration is 20,086 hours, which is a about 3 times longer than the linear configuration.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.63
• /
• pp.33-43
• /
• 2001

To estimate the reliability of a large and complex network with a small variance, we propose two dynamic Monte Carlo sampling methods: the sequential minimal cut set (SMCS) and the sequential minimal path set (SMPS) methods. These methods do not require all minimal cut sets or path sets to be given in advance and do not simulate all arcs at each trial, which can decrease the valiance of network reliability. Based on the proposed methods, we develop the importance sampling estimators, the total hazard (or safety) estimator and the hazard (or safety) importance sampling estimator, and compare the performance of these simulation estimators. It is found that these estimators can significantly reduce the variance of the raw simulation estimator and the usual importance sampling estimator. Especially, the SMCS algorithm is very effective in case that the failure probabilities of arcs are low. On the contrary, the SMPS algorithm is effective in case that the success Probabilities of arcs are low.

• Journal of Electrical Engineering and Technology
• /
• v.12 no.3
• /
• pp.996-1006
• /
• 2017

Phasor Measurement Unit (PMU) placement is a crucial problem for State Estimation (SE) of the power system, which can ensure that the power network is fully observed. Further, the observation reliability problem of the system has been concerned in the operation conditions. In this paper, based on modified weighted adjacent matrix ($A_w$), an optimal placement method is proposed to solve simultaneously two problems involving the optimal PMU placement problem and the observation reliability enhancement problem of the system. The purpose of the proposed method is to achieve both the minimum total cost and the maximum observation reliability, with a focus on increasing the security of observability, strengthening the observation reliability of buses as well as enhancing the effectiveness of redundancy. Simulations on IEEE 14, 24, 30 and 57 bus test systems are presented to justify the methodology. The results of this study show that the proposed method is not only ensuring the power network having the observability effectively but also enhancing significantly the observation reliability. Therefore, it can be a useful tool for SE of the power system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.374-382
• /
• 2020

The purpose of this study is to improve the learning speed of an ammunition stockpile reliability classification artificial neural network model by proposing a normalization method that reduces the number of input variables based on the characteristic of Ammunition Stockpile Reliability Program (ASRP) data without loss of classification performance. Ammunition's performance requirements are specified in the Korea Defense Specification (KDS) and Ammunition Stockpile reliability Test Procedure (ASTP). Based on the characteristic of the ASRP data, input variables can be normalized to estimate the lot percent nonconforming or failure rate. To maintain the unitary hypercube condition of the input variables, min-max normalization method is also used. Area Under the ROC Curve (AUC) of general min-max normalization and proposed 2-step normalization is over 0.95 and speed-up for marching learning based on ASRP field data is improved 1.74 ~ 1.99 times depending on the numbers of training data and of hidden layer's node.

• Smart Media Journal
• /
• v.2 no.1
• /
• pp.8-16
• /
• 2013

The significant enhancement of the edge portion of computer networks including user-side machines and last mile network links encourages the research of the overlay network based data dissemination systems. Varieties of overlay network based data dissemination systems has distinct purposes, and each of them has a proper structure of an overlay network and a efficient communication protocol. In this paper, overlay network based data dissemination systems for Flash Dissemination, whose target is the distribution of relatively small size data to very large number of recipients within very short time, are explored. Mainly two systems, RECREW and FaReCAST, are introduced and analyzed in the aspects of design considerations for overlay networks and communication protocols. According to evaluations for flash dissemination scenarios, it is observed that the proposed overlay network based flash dissemination systems outperforms the previous overlay network based multicasting systems, in terms of the reliability and the dissemination delay. Moreover, the theoretical analysis of the reliability of data dissemination is provided by analysing FaReCAST.