• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 2004.11a
• /
• pp.19-19
• /
• 2004

• Journal of Korea Multimedia Society
• /
• v.9 no.1
• /
• pp.89-100
• /
• 2006

The introduction of GSMP open interface to OBS network can materialize to separate the transport plane and the control plane in OBS network. This makes the implementation of OBS switches simple and provides various flexibility. However, the introduction of open interface will cause the connection setup delay because of the additional processing overhead of open interface protocol. Also, in GSMP based network, the location of network management functions are not defined explicitly and the research result about the OBS network management is almost nothing. This paper proposes a parallel connection setup mechanism using centralized connection control server to minimize connection setup delay in OBS network with GSMP open interface and defines managed objects to support connection, configuration, performance, and fault management for the management of OBS network with GSMP open interface. This paper also proposes a distributed network management model, in which the above managed objects are distributed in a controller and an OBS switch according to network management functions. We verify the possibility of OBS control and network management by implementing network management function using proposed parallel connection setup mechanism and distributed network management model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.2B
• /
• pp.192-202
• /
• 2004

In this paper we have proposed policy-based network management system architecture for Internet QoS support Mobile IP networks that is divided into four layers(application layer, information management layer, policy control layer, device layer), then we propose an implementation strategy of policy-based network management system to enforce various control and network management operations and a model of policy server using SCOPS(Simple Common Open Policy Service) protocol that is developed in this research. For policy-based mobile IP network management system implementation, we have derived four policy classes(access control, mobile IP operation, QoS control, and network monitoring) and we showed operation procedures for each policy scenarios. Finally we have implemented Internet QoS support policy-based mobile IP network testbed and management system and verified out DiffServ policy enforcement behaviors for a target class service that is arranged a specific bandwidth on network congestion conditions.

• 한국정보통신설비학회:학술대회논문집
• /
• 2008.08a
• /
• pp.364-367
• /
• 2008

Many different types of network equipments are deployed in a large-scale IP network. In this operating environment, network service providers suffer from difficulty in controlling various equipments simultaneously in case network faults happen in their overall or regional network due to physical link failure or abnormal traffic. This paper presents a policy-based methodology to control many different types of network equipments at the same time in abnormal cases. The key idea is that NMS(Network Management System) keeps vendor-neutral control policies in normal times and that when an abnormal case occurs in network, NMS transforms the selected policy into vendor-specific control commands and enforces them to various equipments simultaneously.

• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.329-339
• /
• 2019

Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

• Journal of Communications and Networks
• /
• v.6 no.2
• /
• pp.133-146
• /
• 2004

Recently, many active queue management (AQM) algorithms have been proposed to address the performance degradation. of end-to-end congestion control under tail-drop (TD) queue management at Internet routers. However, these AQM algorithms show performance improvement only for limited network environments, and are insensitive to dynamically changing network situations. In this paper, we propose an adaptive queue management algorithm, called PID-controller, that uses proportional-integral-derivative (PID) feedback control to remedy these weak-Dalles of existing AQM proposals. The PID-controller is able to detect and control congestion adaptively and proactively to dynamically changing network environments using incipient as well as current congestion indications. A simulation study over a wide range of IP traffic conditions shows that PID-controller outperforms other AQM algorithms such as Random Early Detection (RED) [3] and Proportional-Integral (PI) controller [9] in terms of queue length dynamics, packet loss rates, and link utilization.

• 제어로봇시스템학회:학술대회논문집
• /
• 1991.10a
• /
• pp.332-336
• /
• 1991

Network management is responsible for gathering information on the usage of the network media by the network devices, ensuring the correct operation of the network, and providing reports. MAP network management must provide the high reliability of the media and signaling method, even in very harsh environments, providing a very low bit error rate and minimum number of retransmission. In this paper, we analysed the framework of OSI management and MAP network management and discussed the implementation method of fault management and remote management mechanism in the Mini-MAP controller developed for IBM-PC.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.495-502
• /
• 2013

In the mobile Ad hoc Network(MANET), improving technique for management and control of topology is recognized as an important part of the next generation network. In this paper, we proposed an efficient node life time management of ATICC(Adaptive Time Interval Clustering Control) in Ad-hoc Networks. Ad-hoc Network is a self-configuration network or wireless multi-hop network based on inference topology. This is a method of path routing management node for increasing the network life time through the periodical route alternation. The proposed ATICC algorithm is time interval control technique depended on the use of the battery energy while node management considering the attribute of node and network routing. This can reduce the network traffic of nodes consume energy cost effectively. As a result, it could be improving the network life time by using timing control method in ad-hoc networks.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.4
• /
• pp.11-17
• /
• 1996

In the case of redundancy control performed by a netowrk management system, it can not be ignored some delay of control time and break of control by failure of the system. This paper proposed a new method to improve the performacne of a redundancy control system interfaced to the network management system. At first, it produced the modelling of the total system and analyzed the functional relation of reliability and failure rate for a transmission system having an one-to-one active redundancy structure controlled by itself. After describing the loss rate of transmission data and the time required for the redundancy control process of the network management system when a failure is occurred, it proposed the new redundancy method of complex system control mode as an effective redundancy control method to improve reliability of a redundancy control system. Finally, it proved the effect by comparing the new result to the previous result.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1581-1585
• /
• 2005

This paper describes the design and implementation of a XCP (Xeline Control Protocol) network system. XCP is an information oriented protocol which delivers information with high reliability according to the predefined rule. The XCP network system is implemented with partly hardware and partly software based on the power line communication(PLC) environment. A network management tool which interacts with devices is also developed. In order to verify the feasibility of the proposed architecture, the implemented XCP network system is evaluated using a lighting control system.