• 제목/요약/키워드: Network Management and Control

검색결과 1,533건 처리시간 0.043초

GSMP 개방형 인터페이스 기반의 OBS 연결 제어 및 망 관리 메커니즘 (Connection Control and Network Management of OBS with GSMP Open Interface)

  • 최인상;김춘희;차영욱;권태현
    • 한국멀티미디어학회논문지
    • /
    • 제9권1호
    • /
    • pp.89-100
    • /
    • 2006
  • OBS 망을 위한 GSMP 개방형 인터페이스 도입은 OBS 망의 전달평면과 제어평면의 분리를 실현하여 OBS 스위치의 구현을 단순화시키고, 망의 다양한 융통성을 제공한다. 그러나 GSMP 프로토콜의 실행 오버헤드로 인하여 연결설정이 증가하는 단점이 있다. 또한 GSMP 개방형 인터페이스에서 망 관리의 위치가 제어기인지, 스위치인지 명확하게 규정되어 있지 않으며, OBS에 대한 망 관리의 연구결과는 전무한 상태이다. 본 논문에서는 GSMP 개방형 인터페이스 기반의 OBS 망에서 연결설정 지연을 최소화하기 위하여 중앙집중형 연결제어 서버를 이용한 병렬형 연결설정 메커니즘을 제안한다. 또한 GSMP 개방형 인터페이스가 적용된 OBS 망의 연결, 구성, 성능 및 장애관리를 위한 관리객체를 정의하고, 이들 관리 정보가 관리 기능별로 OBS 스위치와 제어기에 분산되어 탑재되는 분산 망 관리 모델을 제안한다. 제안한 병렬형 연결설정 메커니즘 및 분산 망 관리 모델을 이용한 망 관리 기능의 구현을 통하여 OBS 제어 및 망 관리의 실현성을 확인하였다.

  • PDF

인터넷 QoS 지원 이동 IP 망에서의 정책기반 망 관리 시스템 설계 및 구현 (ADesign and Implementation of Policy-based Network Management System for Internet QoS Support Mobile IP Networks)

  • 김태경;강승완;유상조
    • 한국통신학회논문지
    • /
    • 제29권2B호
    • /
    • pp.192-202
    • /
    • 2004
  • 2본 논문에서는 인터넷 QoS 지원 이동 IP 망에서의 정책기반 네트워크 시스템 설계 및 망관리 시스템 구현 방법에 대해 제안한다. 본 논문의 망관리 시스템은 정책기반 네트워크의 정책서버로서의 역할을 하게 된다. 인터넷 QoS 지원 이동 IP 망에서의 정책기반 네트워크의 전체적인 프레임워크는 크게 응용계층, 정보관리계층, 정책제어 계층, 디바이스계층의 네 계층으로 나뉘어 통합된 관리를 수행하는 구조를 가지고 있으며, 이러한 통합된 망관리 시스템에 적용할 네 가지 범주(access control, mobile IP operation, QoS control, network monitoring)의 정책 구조를 정의하고 이에 따른 동작 절차의 예를 보인다. 실제 QoS 지원 이동 IP 망에서의 정책기반 망관리 시스템의 구현을 위한 설계 방법 및 S/W의 구조와 각 모듈 별 기능에 대해 제시하고 이 망관리 시스템과 각각의 에이전트들과의 원활한 통신을 위해 개발한 SCOPS(Simple Common Open Policy Service)프로토콜의 구조 및 기능에 대해 정의한다. 마지막으로 제안된 인터넷 QoS 지원 이동 IP 망에서의 정책기반 망관리 시스템을 실험실 규모의 테스트 베드에 적용하여 구성하는 방법에 대해 자세히 설명하고 성능평가한다.

대규모 IP 네트워크에서 정책기반의 네트워크 제어방법 연구 (A Policy-based Network Control Methodology for Large-scale IP Network)

  • 오준석;손춘호;김기응;이재진
    • 한국정보통신설비학회:학술대회논문집
    • /
    • 한국정보통신설비학회 2008년도 정보통신설비 학술대회
    • /
    • pp.364-367
    • /
    • 2008
  • Many different types of network equipments are deployed in a large-scale IP network. In this operating environment, network service providers suffer from difficulty in controlling various equipments simultaneously in case network faults happen in their overall or regional network due to physical link failure or abnormal traffic. This paper presents a policy-based methodology to control many different types of network equipments at the same time in abnormal cases. The key idea is that NMS(Network Management System) keeps vendor-neutral control policies in normal times and that when an abnormal case occurs in network, NMS transforms the selected policy into vendor-specific control commands and enforces them to various equipments simultaneously.

  • PDF

정수장 감시제어망의 관리와 보안개선을 위한 산업용 보안 L2스위치 개발 및 적용사례 (The development of industrial secure L2 switch and introduction example for management and security improvement of supervisory control network in purification plant)

  • 김윤하;유철;오은;김찬문;박익동;김용성;최현주
    • 상하수도학회지
    • /
    • 제33권5호
    • /
    • pp.329-339
    • /
    • 2019
  • Recently, the advancement of information and communication technology(ICT) is expanding the connectivity through Internet of Things(IoT), and the media of connection is also expanding from wire/cable transmission to broadband wireless communication, which has significantly improved mobility. This hyperconnectivity has become a key element of the fourth industrial revolution, whereas the supervisory control network of purification plants in korea is operated as a communication network separated from the outside, thereby lagging in terms of connectivity. This is considered the best way to ensure security, and thus there is hardly any consideration of establishing alternatives to operate an efficient and stable communication network. Moreover, security for management of a commercialized communication network and network management solution may be accompanied by immense costs, making it more difficult to make new attempts. Therefore, to improve the conditions for the current supervisory control network of purification plants, this study developed a industrial security L2 switch that supports modbus TCP(Transmission Control Protocol) communication and encryption function of the transmission section. As a result, the communication security performance improved significantly, and the cost for implementing the network management system using Historical Trend and information of HMI(Human Machine Interface) could be reduced by approximately KRW 200 million. The results of this study may be applied to systems for gas, electricity and social safety nets that are infrastructure communication networks that are similar to purification plants.

Application of a PID Feedback Control Algorithm for Adaptive Queue Management to Support TCP Congestion Control

  • Ryu, Seungwan;Rump, Christopher M.
    • Journal of Communications and Networks
    • /
    • 제6권2호
    • /
    • pp.133-146
    • /
    • 2004
  • Recently, many active queue management (AQM) algorithms have been proposed to address the performance degradation. of end-to-end congestion control under tail-drop (TD) queue management at Internet routers. However, these AQM algorithms show performance improvement only for limited network environments, and are insensitive to dynamically changing network situations. In this paper, we propose an adaptive queue management algorithm, called PID-controller, that uses proportional-integral-derivative (PID) feedback control to remedy these weak-Dalles of existing AQM proposals. The PID-controller is able to detect and control congestion adaptively and proactively to dynamically changing network environments using incipient as well as current congestion indications. A simulation study over a wide range of IP traffic conditions shows that PID-controller outperforms other AQM algorithms such as Random Early Detection (RED) [3] and Proportional-Integral (PI) controller [9] in terms of queue length dynamics, packet loss rates, and link utilization.

실시간 응용을 위한 MAP 네트워크 관리에 관한 연구 (A study on the MAP network management for real time application)

  • 이창원;신기명;이강현;김용득
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
    • /
    • pp.332-336
    • /
    • 1991
  • Network management is responsible for gathering information on the usage of the network media by the network devices, ensuring the correct operation of the network, and providing reports. MAP network management must provide the high reliability of the media and signaling method, even in very harsh environments, providing a very low bit error rate and minimum number of retransmission. In this paper, we analysed the framework of OSI management and MAP network management and discussed the implementation method of fault management and remote management mechanism in the Mini-MAP controller developed for IBM-PC.

  • PDF

애드혹 네트워크에서 적응적 시간관리 기법을 이용한 클러스터링 노드 에너지 수명의 효율적인 관리 방법 (An Efficient Node Life-Time Management of Adaptive Time Interval Clustering Control in Ad-hoc Networks)

  • 오영준;이강환
    • 한국정보통신학회논문지
    • /
    • 제17권2호
    • /
    • pp.495-502
    • /
    • 2013
  • MANET(Mobile Ad-hoc Network)에서는 에너지 효율을 높이기 위한 다양한 클러스터링 기법과 라우팅 알고리즘이 연구되고 있다. 일반적으로 무선 Ad-hoc 네트워크에서는 LEACH와 같은 클러스터 기반의 동적 라우팅 알고리즘이 많이 사용된다. 본 논문에서는 클러스터내의 각 노드가 가지는 속성을 고려하여 클러스터를 생성하고 노드를 관리하는 ATICC(Adaptive Time Interval Clustering Control) 알고리즘 기법을 제안한다. 제안한 ATICC은 노드의 속성 중의 하나인 잔여에너지 값으로 노드의 에너지 레벨을 분류한다. 그리고 분류된 에너지 레벨에 대응하는 시간차 컨트롤 기법을 이용하여 클러스터링 과정을 수행하거나 노드들을 관리한다. 특히 제안한 ATICC 알고리즘은 MANET에서 클러스터의 생성, 재생성, 진입 노드 및 이탈 노드의 검출과 관리를 통해 노드의 에너지 관리 효율을 향상시키고 클러스터의 Lifetime을 증가시키는 결과를 보여주었다.

망관리 시스템에 접속되는 동적 이중화 제어 시스템의 성능 개선 (Performance improvement of an active redundancy control system interfaced to a network management system)

  • 박승창;장대익;오의교
    • 전자공학회논문지A
    • /
    • 제33A권4호
    • /
    • pp.11-17
    • /
    • 1996
  • In the case of redundancy control performed by a netowrk management system, it can not be ignored some delay of control time and break of control by failure of the system. This paper proposed a new method to improve the performacne of a redundancy control system interfaced to the network management system. At first, it produced the modelling of the total system and analyzed the functional relation of reliability and failure rate for a transmission system having an one-to-one active redundancy structure controlled by itself. After describing the loss rate of transmission data and the time required for the redundancy control process of the network management system when a failure is occurred, it proposed the new redundancy method of complex system control mode as an effective redundancy control method to improve reliability of a redundancy control system. Finally, it proved the effect by comparing the new result to the previous result.

  • PDF

Design and Implementation of XCP Network System

  • Heo, Jong-Man;Kang, Hyoung-Koo;Kim, Woo-Young;Kwon, Wook-Hyun
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2005년도 ICCAS
    • /
    • pp.1581-1585
    • /
    • 2005
  • This paper describes the design and implementation of a XCP (Xeline Control Protocol) network system. XCP is an information oriented protocol which delivers information with high reliability according to the predefined rule. The XCP network system is implemented with partly hardware and partly software based on the power line communication(PLC) environment. A network management tool which interacts with devices is also developed. In order to verify the feasibility of the proposed architecture, the implemented XCP network system is evaluated using a lighting control system.

  • PDF