• 한국전자통신학회논문지
• /
• 제11권12호
• /
• pp.1187-1192
• /
• 2016

수중 MANET의 설계, 구축 및 운용에서 전송성능의 측정 및 분석은 네트워크 차원의 전송 파라미터를 중심으로 수행됨에 따라 성능 분석 결과가 네트워크 수준의 성능에 국한되고 있어 사용자 수준의 전송품질과 관련한 전송성능을 분석 고찰하기에는 미흡한 점이 있다. 본 논문에서는 수중 MANET에서 네트워크 수준의 전송성능 분석의 단점을 보완하고자 사용자 수준에서 요구되는 응용트래픽 관점에서 전송성능을 분석한다. 수중 MANET에서 활용도가 증가할 것으로 예상되는 음성트래픽을 대상으로 전송성능을 분석하고, MOS, CCR 및 EED 등의 음성 전송품질 요구조건에 적합한 수중 MANET 조건을 제시한다. 본 연구는 NS-2를 기반으로 구축된 컴퓨터 시뮬레이션을 사용하여 수행하며, 음성 트래픽으로는 VoIP 규격을 사용한다.

• 문화기술의 융합
• /
• 제8권4호
• /
• pp.457-468
• /
• 2022

웹툰 산업이 급속도로 성장하며, 이러한 성장세와 함께 새로운 웹툰 애플리케이션 모델이 제시되었다. 웹툰 애플리케이션 1.0과 2.0을 지나 3.0의 시대가 시작된 것이다. 이러한 변화에도 불구하고 아직까지 웹툰 애플리케이션을 대상으로 한 사용자 리뷰 분석 연구는 부족한 실정이다. 이에 이 연구는 웹툰 애플리케이션 3.0 모델을 제시한 '카카오웹툰(다음웹툰)'을 대상으로 사용자 리뷰를 분석하고자 한다. 분석을 위해 애플리케이션 리뷰 20,382개를 수집한 후 전처리 과정을 버전 별로 TF-IDF, 네트워크 분석, 토픽 모델링, 감성 분석을 실시하였다. 이를 통해 웹툰 애플리케이션 변화에 따른 사용자 경험을 탐구하고 리뷰를 통한 사용성 평가를 진행하였다.

• 한국도서관정보학회지
• /
• 제47권4호
• /
• pp.1-18
• /
• 2016

이 연구는 독후감 텍스트의 주제분석에 토픽모델링의 활용방안을 탐색하는 것을 목적으로 하고 있다. 텍스트의 주제분석 방안으로서 토픽모델링 분석방법을 이해하고, R에서 제공하는 "topicmodels" 패키지의 LDA 함수를 사용하여 23건의 사례 독후감 텍스트들을 대상으로 실제의 분석작업을 수행하였다 토픽모델링 분석결과 16개의 토픽들을 추출하였고 토픽과 구성 단어들의 관계에서 토픽 네트워크 사례 독후감과 토픽들의 관계에서 독후감 네트워크를 구성하였다. 이후 토픽 네트워크와 독후감 네트워크를 대상으로 중심성 분석을 수행하였으며 분석결과는 다음과 같다. 첫째 16개의 토픽들이 1개의 컴포넌트를 가지는 네트워크로 나타났다. 이것은 16개 토픽들이 상호 연관되어 있다는 것을 의미한다. 둘째, 독후감 네트워크에서는 연결정도 중심성이 높은 독후감들과 낮은 독후감들로 구분이 되었다. 전자의 독후감들은 다른 독후감들과 주제적으로 유사성을 가지며 후자의 독후감들은 다른 독후감들과 주제적으로 상이성을 가지는 것으로 해석하였다. 토픽모델링의 결과를 네트워크 분석과 결합함으로써 독후감의 주제파악에 유용한 결과들을 얻게 되었다.

• 한국생물정보학회:학술대회논문집
• /
• 한국생물정보시스템생물학회 2005년도 BIOINFO 2005
• /
• pp.366-370
• /
• 2005

Tissue microarry is one of the high throughput technologies in the post-genomic era. Using tissue microarray, the researchers are able to investigate large amount of gene expressions at the level of DNA, RNA, and protein The important aspect of tissue microarry is its ability to assess a lot of biomarkers which have been used in clinical practice. To manipulate the categorical data of tissue microarray, we applied Bayesian network classifier algorithm. We identified that Bayesian network classifier algorithm could analyze tissue microarray data and integrating prior knowledge about gastric cancer could achieve better performance result. The results showed that relevant integration of prior knowledge promote the prediction accuracy of survival status of the immunohistochemical tissue microarray data of 18 tumor suppressor genes. In conclusion, the application of Bayesian network classifier seemed appropriate for the analysis of the tissue microarray data with clinical information.

• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.110-115
• /
• 2001

Today, effective utilization of sophisticated networks greatly influences the activities of a business, making performance evaluations of computer network systems a necessity, We have developed a special computer network simulator capable of automatically generating a model based on data accumulated by a network analyzer to guide the user in selecting ideal parameters. The simulator was developed to provide user-friendly analysis for engineers involved in the actual network design. This paper gives an overview of the simulator and describes an example application of evaluating a network design that anticipates the future increase in traffic for a company introducing voice over frame relay (VoFR) into a wide area network (WAW).

• 제어로봇시스템학회논문지
• /
• 제16권7호
• /
• pp.655-660
• /
• 2010

As increasing the number of Electronic Control Units in a vehicle, the proportion for reliability and stability of the software is going increasingly. Accordingly, the traditional CAN network has occurred the situation that the requirement of developing vehicle software is not sufficient. To solve these problems, the FlexRay network which is ensured the high bandwidth and real-time is generated. However it is difficult to implement FlexRay based application software because of complex protocol than traditional CAN network. Accordingly the system for analysis and verification of network state is needed. Also vehicle vendor develops application software using Matlab/Simulink in order to increase productivity. But this development method is hard to solve the network problem of node to node. Therefore this paper implements Matlab/Simulink based FlexRay network system and verifies it through comparing with existing embedded system.

• 한국산업정보학회논문지
• /
• 제2권1호
• /
• pp.103-123
• /
• 1997

This dissertation provides a theoretic study on the network security in general , the firewall in particular. In fact the firewall has been recognized as a very promising option to obtain the security inthe real work network environment . The dissertation provides a throuth theoretic investigation on the various problems raised in the computer network, and also explores a methodology of the security against IP spoofing. Moreover, it investigates a systematic procddure to make analysis and plans of the firewall configuration . Based on the above investigation and analysis, this dissertation provides two approaches to network security , which address anumber of issuesboth at the network and at applicatino level. At the network level, a new method is proposed which uses packet filtering based on the analysis of the counter plot about the screen router.On the other hand, at the application level, a novel method is explored which employs secureity software. Firewall-1 , on Bastion host. To demonstrate the feasibililty and the effectiveness of the proposed methodologties , a prototype implementation is made The experiment result shows that the screen router employing the proposed anti-IP spoofing method at the network level is effective enough for the system to remain secure without being invaded by any illegal packets entering form external hackers. Meanwhile , at the application level, the proposed software approach employing Firewall-1 is proved to be robust enugh to prevent hackings from the outer point the point protocal connnection . Theoretically, it is not possible to provide complete security to the network system, because the network security involve a number of issues raised form low level network equipments form high level network protocol. The result inthis dissertation provides a very promising solution to network security due to its high efficiency of the implementation and superb protectiveness from a variety of hacking.

• Nuclear Engineering and Technology
• /
• 제32권5호
• /
• pp.485-494
• /
• 2000

In this work, a fuzzy neural network is used to estimate the relevant sensor signal using other sensor signals. Noise components in input signals into the fuzzy neural network are removed through the wavelet denoising technique . Principal component analysis (PCA) is used to reduce the dimension of an input space without losing a significant amount of information. A lower dimensional input space will also usually reduce the time necessary to train a fuzzy-neural network. Also, the principal component analysis makes easy the selection of the input signals into the fuzzy neural network. The fuzzy neural network parameters are optimized by two learning methods. A genetic algorithm is used to optimize the antecedent parameters of the fuzzy neural network and a least-squares algorithm is used to solve the consequent parameters. The proposed algorithm was verified through the application to the pressurizer water level and the hot-leg flowrate measurements in pressurized water reactors.

• 한국정밀공학회지
• /
• 제15권9호
• /
• pp.82-92
• /
• 1998

An international standard for the product model data, STEP, and a standard for the distributed object technology, CORBA, will play a very important role in the future manufacturing environment. These two technologies provide background for the sharing of product data and the integration of applications on the network. This paper describes a prototype CAD/CAE environment that is integrated on the network by STEP and CORBA. Several application servers and client software were developed to verify the proposed concept. The present CAD/CAE environments are composed of several individual software components which are not tightly integrated. They also do not utilize the rapidly expanding network and object technologies for the collaboration in the product design process. In the design process in a large organization, sharing of application resources, design data and analysis data through the network will greatly enhance the productivity. The integration between applications can be supported by two key technologies, CORBA(Common Object Request Broker Architecture) and STEP(Standard for the Exchange of Product Model Bata). The CORBA provides interoperability between applications on different machines in heterogeneous distributed environments and seamlessly interconnects distributed object systems. Moreover, if all the data in the CAD/CAE environment are based on the STEP, then we can exclude all the data conversion problems between the application systems.

• 조명전기설비학회논문지
• /
• 제28권10호
• /
• pp.27-36
• /
• 2014

Network analysis applications in energy management systems play a key role in the economic and reliable operation of power systems. In order to provide operators with useful network information, the accurate results of topology processing, state estimation, power flow, and contingency analysis must be simulated. This paper proposes a validation methodology of network analysis applications in energy management systems. The energy management systems was checked to ensure that it meets the originally specified functions based on the proposed methodology. In addition, the performance of state estimation is evaluated with the reference of the proposed methodology. The proposed methodology is being conducted by energy management systems and the Korean power systems have been utilized for the test systems.