• 한국항공우주학회지
• /
• 제38권3호
• /
• pp.207-212
• /
• 2010

본 논문에서는 고정익 무인항공기의 그물망 자동착륙을 위한 나선형 강하궤적과 종말 유도기법을 설계하였다. 시야가 확보된 좁은 지역에서 착륙하도록 고정익 항공기의 나선형 강하궤적을 설계하였고, 나선형 강하의 끝점에서 그물망 입사방향을 향하도록 비행경로각 명령을 생성하였다. 종말유도 단계에서는 그물망 중심으로의 정밀한 유도를 위하여 시선각 정보 기반 의사추적 유도기법을 설계하였다. 고정익 무인항공기의 시스템 인식 모델을 이용한 6자유도 수치 시뮬레이션을 수행하여 제안한 나선형 착륙비행의 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제14권12호
• /
• pp.1253-1259
• /
• 2008

This paper presents a landing controller and guidance law for net-recovery of fixed-wing unmanned aerial vehicles. A linear quadratic controller was designed using the system identification result of the unmanned aerial vehicle. A pursuit guidance law is applied to guide the vehicle to a recovery net with imaginary landing points on the desired approach path. The landing performance of a pure pursuit guidance, a constant pseudo pursuit guidance, and a variable pseudo pursuit guidance is compared. Numerical simulation using an unmanned aerial vehicle model was performed to verify the performance of the proposed landing guidance law.

• Ocean and Polar Research
• /
• 제26권2호
• /
• pp.361-365
• /
• 2004

Deep-sea Resources Research Center (DRRC) has been using a free-fall grab (FFG) for the resource evaluation of polymetallic nodules in the KODOS (Korea Deep Ocean Study) area, NE Pacific, since 1992. A FFG model (Model 4200, Benthos) adapting one glass buoy system (diameter 17 inch, net buoyance 25.4 kg) has been used until 1993. Since then, DRRC has carried out a study to increase the recovery rate of FFG and it was found that a revised system adapting an additional buoy (diameter 10 inch, net buoyance 4.5 kg) gives improved results. The nodule sampling tests were performed using two different models for the same study area and the resulting recovery rates were compared. The result shows no distinct difference in recovery time between two models, but average recovery rate of the revised model was increased to 99.44% from 96.06% of the original model.

• Ocean and Polar Research
• /
• 제39권3호
• /
• pp.221-232
• /
• 2017

The purpose of this study is to estimate the extent of fisheries resource rebuilding and other economic effects on coastal gill-net fishery as a result of the Korean vessel buy-back program using with-without analysis based on methods estimating sustainable yields for all species caught by coastal gill-net fishery. Based on the results of with-without analysis, maximum sustainable yields (MSY) of all species caught by coastal gill-net fishery have been increased by the Korean vessel buy-back program. In addition, profits per vessel of maximum economic yield (MEY) of the species have been improved by the program. Further, yields and a producer surplus per vessel under an equilibrium of open access (OA) have increased because of the program. In detail, first of all, at the MSY level, the vessel buy-back program has led to about 21% fisheries resource recovery, and at the MEY level, it has led to about a 19% resource recovery. Secondly, at the MEY level and the OA level, the producer surplus per vessel has been increased by about 24% and 22% respectively by the vessel buy-back program.

• 제어로봇시스템학회논문지
• /
• 제8권8호
• /
• pp.706-712
• /
• 2002

In general, a deadlock in flexible manufacturing systems (FMSs) is caused by a resource limitation and the diversity of routings. However, the deadlock of industrial controllers such as programmable logic controllers (PLCs) can occur from different causes compared with those in general FMSs. The deadlock of PLCs is usually caused by an error signal between PLCs and manufacturing systems. In this paper, we propose a deadlock detection and recovery (DDR) algorithm to resolve the deadlock problem of PLCs at design stage. This paper employs the MAPN (modified automation Petri net), MTPL (modified token passing logic), and ECC (efficient code conversion) algorithm to model manufacturing systems and to convert a Petri net model into a desired LD (ladder diagram). Finally, an example of manufacturing systems is provided to illustrate the proposed DDR algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1998년도 제13차 학술회의논문집
• /
• pp.329-334
• /
• 1998

This work is concerned with the problem of tracking a maneuvering target. In this paper, an error monitoring and recovery method of perception net is utilized to improve tracking performance for a highly maneuvering tar-get. Many researches have been performed in tracking a maneuvering target. The conventional Interacting Multiple Model (IMM) filter is well known as a suboptimal hybrid filter that has been shown to be one of the most cost-effective hybrid state estimation scheme. The subfilters of IMM can be considered as fusing its initial value with new measurements. This approach is also shown in this paper. Perception net based error monitoring and recovery technique, which is a kind of geometric data fusion, makes it possible to monitor errors and to calibrate possible biases involved in sensed data and extracted features. Both detecting a maneuvering target and compensating the estimated state can be achieved by employing the properly implemented error monitoring and recovery technique. The IMM filter which employing the error monitoring and recovery technique shows good tracking performance for a highly maneuvering target as well as it reduces maximum values of estimation errors when maneuvering starts and finishes. The effectiveness of the pro-posed method is validated through simulation by comparing it with the conventional IMM algorithm.

• Nuclear Engineering and Technology
• /
• 제56권2호
• /
• pp.685-687
• /
• 2024

Fiber optic cables are used extensively for remote monitoring in applications under extreme conditions, such as at high temperatures or in ionizing radiation fields. When high temperature fiber optic cables were subjected to gamma irradiations, there was a significant loss in transmission at wavelengths < 350 nm after only 1 minute of irradiation. Negligible recovery of the fiber optic transmission with time was observed over 2 years, but the irradiation damage was almost completely reversed by high temperature annealing at 400 ℃.

• International Journal of Aeronautical and Space Sciences
• /
• 제9권2호
• /
• pp.114-120
• /
• 2008

In the vision-based recovery phase, a terminal guidance for the blended-wing UAV requires visual information of high accuracy. This paper presents the light source target design and detection algorithm for vision-based UAV recovery. We propose a recovery target design with red and green LEDs. This frame provides the relative position between the target and the UAV. The target detection algorithm includes HSV-based segmentation, morphology, and blob processing. These techniques are employed to give efficient detection results in day and night net recovery operations. The performance of the proposed target design and detection algorithm are evaluated through ground-based experiments.

• Nuclear Engineering and Technology
• /
• 제47권5호
• /
• pp.588-595
• /
• 2015

This study presents an effective method for additional recovery of residual actinides in liquid electrodes after the electrowinning process of pyroprocessing. The major distinctive feature of this method is a reactor with multiple reaction cells separated by partition walls in order to improve the recovery yield, thereby using the interelement difference in diffusion coefficients within the liquid electrode and controlling the selectivity and purity of element recovery. Through an example of numerical simulation of the diffusion scenarios of individual elements, we verified that the proposed method could effectively separate the actinides (U and Pu) and rare-earth elements contained in liquid cadmium. We performed a five-step consecutive recovery process using a simplified conceptual reaction cell and recovered 58% of the initial amount of actinides (U + Pu) in high purity (${\geq}99%$).

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1874-1885
• /
• 2000

When a receiver of ciphertext message can not decrypt a message because he has lost his private-key, the private-key of receiver and session-key of the message should be recovered. In this paper, we developed an Encapsulation based Key Recovery System (EKRS). EKRS is a new key encapsulation based key recovery system which is characterized by secretly choice of KRA, randomized target keys. n-way recovery type, and useful for commercial key recovery. EKRS is formally specified by a pictorial model, an Extended Cryptographic Timed Petri Net (ECTPN). Secure information flow and reachability of a session-key are verified by using reachability graph of ECTPN. EKRS, executing over a Public Key Infrastructure, can be used as a security solution in Web based applications such as CALS, EC an EDI.