• 한국컴퓨터산업학회논문지
• /
• 제6권5호
• /
• pp.741-748
• /
• 2005

형광램프용 전자식 안정기의 효율개선 및 램프의 수명연장을 위하여 강유전체 커패시터와 시간지연스위칭회로로 구성된 절전모듈을 개발하고 적용하였다. 절전모듈에 사용된 강유전체 세라믹스를 이용하여 형광램프의 부저항특성과 최적화를 시키고, 시간지연회로를 통하여 점등초기 예열형에서 비예열형으로 스위칭시켜 점등 중 필라멘트에서 소비되는 전력을 제거함으로써 약 2W의 소비전력을 감소시켜 효율개선을 실현하였으며, 역기전력 제거기능을 통하여 점등 초기 형광램프 필라멘트에 가해지는 충격을 최소화함으로써 형광램프의 수명을 연장시켰다.

• 한방비만학회지
• /
• 제9권1호
• /
• pp.53-58
• /
• 2009

Objectives The purpose of this study was to investigate the clinical effect of oriental medical therapy on obesity and the progress of weight loss through an oriental obesity program. Methods The subjects were treated from January 2008 to February 2009 in J Korean Medical Hospital. Herbal medical Hospital. Herbal medicine, electrolipolysis, auricular acupuncture were performed during the treatment period. We checked the change of weight every treatment time and measured the body composition by bioelectrical impedance analysis(BIA) every 2 weeks. Results The progress of weight loss was steady in the first 4 weeks except for the sixth weight check. After 4 weeks treatment, the weight loss was 3.52${\pm}$1.98Kg and 4.83${\pm}$2.68%. Total fat mass measured by BIA significantly decreased 2.58${\pm}$1.30Kg after 4 weeks. Age and the weight loss were significantly negative correlated. Conclusions Oriental obesity treatment could be effective on obesity, but further studies would be needed for the foundation of a clinical guideline reflecting various factors.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제13권4호
• /
• pp.387-394
• /
• 2013

As the feature size of integrated circuits continues to decrease, the challenge of achieving an oxidation-free exposed layer after photoresist (PR) stripping is becoming a critical issue for semiconductor device fabrication. In this article, the hydrogen plasma characteristics in direct plasma and the PR stripping rate in remote plasma were studied using a $120{\Phi}$ cylindrical inductively coupled plasma source. E mode, H mode and E-H mode transitions were observed, which were defined by matching the $V_{rms}$ and total impedance. In addition, the dependence of the E-H mode transition on pressure was examined and the corresponding plasma instability regions were identified. The plasma density and electron temperature increased gradually under the same process conditions. In contrast, the PR stripping rate decreased with increasing proportion of $H_2$ gas in mixed $H_2/N_2$ plasma. The decrease in concentration of reactive radicals for the removal of PR with increasing $H_2$ gas flow rate suggests that NH radicals have a dominant effect as the main volatile product.

• Advances in materials Research
• /
• 제5권3호
• /
• pp.181-192
• /
• 2016

In this work effect of high energy milling on the structural and electrical properties of $Ba(Fe_{1/2}Ta_{1/2})O_3$ (BFT) ceramic synthesized using standard solid-state reaction method were investigated. X-ray diffraction studies indicated that the unit cell structure for all the samples to be hexagonal (space group: P3m1). FTIR spectra also confirmed the formation of BFT without any new phase. The milled (10 h) BFT ceramic showed the formation of small grain sizes (<$2{\mu}m$) which is beneficial for dielectric applications in high density integrated devices. Besides, the milled (10 h) BFT ceramic sample exhibited superior dielectric properties (enhancement in ${\varepsilon}^{\prime}-value$ and reduction in $tg{\delta}-value$) compared to un-milled one. Impedance analysis indicated the negative temperature coefficient of resistance (NTCR) character. The correlated barrier hopping model (jump relaxation type) is found to successfully explain the mechanism of charge transport in present ceramic samples.

• 한국정보통신학회논문지
• /
• 제16권3호
• /
• pp.565-570
• /
• 2012

본 논문은 LTE-Advanced 시스템을 위한 멀티채널을 선택할 수 있는 저역통과 필터를 제안한다. 제안하는 저역통과 필터는 5 MHz, 10 MHz, 그리고 40 MHz의 3가지 모드의 차단주파수를 제공하며 Active-RC 5차 Chebyshev 구조로 설계되었다. 저전력을 확보하면서 40 MHz의 높은 차단 주파수를 확보하기 위해서 부성 저항을 가지는 PMOS Cross-Connection Load를 사용한 연산증폭기를 필터에 적용하였다. 더불어 공정, 전압, 그리고 온도에 의한 각각의 차단주파수 변화에 대응할 수 있도록 각각 3-bit 제어 가능한 튜닝회로를 추가하였다. 제안하는 필터는 0.13-${\mu}m$ CMOS 공정을 사용하여 설계하였으며 1.2 V 전압에서 총 20.9 mW 전력을 소모한다.

• 전력전자학회논문지
• /
• 제23권1호
• /
• pp.9-15
• /
• 2018

This study investigates a bidirectional quasi-Z-source inverter (Bq-ZSI) system with bidirectional power transfer capability and a modified space vector modulation scheme for reducing the ripple of the inductor current. By replacing the diode in the impedance network with an active switch, the power flow can be bidirectional. The average inductor current of the Bq-ZSI network is negative in the regenerative braking mode, thereby regenerating the power. In addition, modified space vector modulation scheme is applied to the Bq-ZSI to control shoot-through time effectively. A 5 kW prototype is built and tested to implement the proposed system. Experimental results show that the Bq-ZSI system is capable of regenerative braking of the induction motor and that the modified space vector modulation method is efficient.

• 한국전기전자재료학회논문지
• /
• 제32권1호
• /
• pp.40-46
• /
• 2019

To study the frequency response characteristics of alternating-current-driven organic light-emitting diodes (OLEDs), we fabricated blue-fluorescent OLEDs and analyzed their electroluminescent characteristics according to the alternating current voltage and frequency. The luminance-frequency characteristics of alternating-current-driven OLED was similar to that of a low-pass filter, and the luminance of high-voltage OLED decreased at higher frequency than low-voltage OLED. The luminance characteristics of the OLED according to the frequency is due to the capacitive reactance in the OLED, generated during the alternating current driving. The frequency response characteristics of the OLED according to the voltage is due to the decrease in internal resistance of the organic layer. In addition, the negative voltage component of the alternating current did not affect the frequency response of the OLED. Therefore, the electroluminescent characteristics of OLED with an alternating current power of 60 Hz are not influenced by the frequency.

• 한국가시화정보학회지
• /
• 제20권3호
• /
• pp.49-57
• /
• 2022

The interaction of planar shock wave with rectangular water column is investigated numerically. The flow phenomenon like reflection, transmission, cavitation, recirculation of shock wave, and large negative pressure due to expansion waves was discussed qualitatively and quantitatively. The numerical simulation was performed in a shock tube with a water column, and planar shock was initiated with a pressure ratio of 10. Three cases of the water column with different thicknesses, namely 0.5D, 1D, and 2D, were installed and studied. Water naturally has a higher acoustic impedance than air and mitigates the shock wave considerably. The numerical simulations were modelled using Eulerian and Volume of fluids multiphase models. The Eulerian model assumes the water as a finite structure and can visualize the shockwave propagation inside the water column. Through the volume of fluids model, the stages of breakup of the water column and mitigation effects of water were addressed. The numerical model was validated against the experimental results. The computational results show that the installation of a water column significantly impacts the mitigation of shock wave.

• Corrosion Science and Technology
• /
• 제14권2호
• /
• pp.99-105
• /
• 2015

The structures of reinforced concrete have been extensively increased with rapid development of industrial society. Futhermore, these reinforced concretes are easy to expose to severe corrosive environments such as seawater, contaminated water, acid rain and seashore etc.. Thus, corrosion problem of steel bar embedded in concrete is very important in terms of safety and economical point of view. In this study, specimens having six different coating thickness (W/C:0.5) were prepared and immersed in flowing seawater for five years to evaluate the effect of coating thickness and immersion time on corrosion property. The polarization characteristics of these embedded steel bars were investigated using electrochemical methods such as corrosion potential, anodic polarization curve, and impedance. At the 20-day immersion, the corrosion potentials exhibited increasingly nobler values with coating thickness. However, after 5-yr. immersion their values were shifted in the negative direction, and the relationship between corrosion potential and coating thickness was not shown. Although 5-yr. immersion lowered corrosion potential, 5-yr. immersion did not increase corrosion rate. In addition, after 5-yr. immersion, the thinner cover thickness, corrosion current density was decreased with thinning coating thickness. It is due to the fact that ease incorporation of water, dissolved oxygen and chloride ion into a steel surface caused corrosion and hence, leaded to the formation of corrosion product. The corrosion product plays the role as a corrosion barrier and increases polarization resistance. The corrosion probability evaluated depending on corrosion potential may not be a good method for predicting corrosion probability. Hence, the parameters including cover thickness and passed aged years as well as corrosion potential is suggested to be considered for better assessment of corrosion probability of reinforced steel exposed to partially or fully in marine environment for long years.

• 한국전자파학회논문지
• /
• 제16권5호
• /
• pp.482-487
• /
• 2005

본 연구에서는 distributed amplifer를 구성하는 cascode 단위이득단의 공통게이트의 게이트 단자에 가변 커패시터를 연결함으로써 출력 저항 값을 조절하는 방법을 제안한다. Cascode 이득단은 공통 소스 이득단에 비해 높은 이득, 높은 출력저항, 부성저항을 제공하는 등 여러 장점이 있지만 설계시 사용한 트랜지스터 모델이 부정확하고 공정변수가 달라진다면 이득이 떨어지기 시작하는 band edge에서 발진할 위험이 있다. 그러므로 회로가 제작된 이후에도 발진을 막을 수 있는 조절회로가 필요하게 되는데, cascode단위 이득단의 공통 게이트 단자에 연결된 가변 커패시터가 그 역할을 할 수 있다. 제작한 distributed amplifier를 측정해본 결과 가변 커패시터를 조절함으로써 이득 특성을 변화시킬 수 있었으며, 이는 회로의 안정도를 보장할 수 있음을 알 수 있었다. 49GHz의 밴드폭내에서 이득은 $8.92\pm0.82 dB$이며, 군지연은 41GHz 이내에서 $\pm9.3 psec$ 범위 이내였다. 사용된 모든 transistor는 GaAs 기반의 $0.15{\mu}m$ 게이트 길이를 가지 는 p-HEMT이며, distributed amplifier는 총 4개의 이득단으로 구성되어 있다.