• 제목/요약/키워드: Needle-Shaped

검색결과 167건 처리시간 0.028초

기상성장법(CVT)에 의한 Iron disilicide단결정의 합성 (Synthesis of iron disilicide single crystal by chemical vapour transport)

  • 이충효;홍대석;이상진;최종건;김판채
    • 한국결정성장학회지
    • /
    • 제12권2호
    • /
    • pp.68-72
    • /
    • 2002
  • Iodine ($I_2$)을 이용한 기상성장법(chemical vapour transport CVT)으로 상용 FeSi$_2$분말로부터 $\beta$-$FeSi_2$$\alpha$-$FeSi_2$단결정을 제조하였다 $FeSi_2$ 분말은 iodine과 함게 석영 ampoule에 넣은 후 진공배기하여 two-zone 전기로 내에서 기상성장 시켰다. CVT법에 의한 기상성장시 고온부분의 source측 온도는 $1050^{\circ}C$이었으며 $\beta$-$FeSi_2$$\alpha$-$FeSi_2$ 단결정이 얻어지는 성장측 온도는 각각 $750^{\circ}C$$950^{\circ}C$이었다. 이때 얻어진$\alpha$-$FeSi_2$ 단격정은 $l0\times10 \textrm{mm}^2$크기의 판상결정이었고 orthorhombic 구조의 $\beta$-$FeSi_2$, 단결정은 길이 10mm의 needle형 결정임을 알 수 있었다. $\alpha$-$FeSi_2$ 단결정의 조성을 EPMA로 조사한 결과 Si이 화학양론비보다 많은 $FeSi_{2.58}$ 이었다. CVT법으로 합성된 $\beta$-$FeSi_2$ 격정의 승온에 따른 상의 안정성을 조사한 결과 $930^{\circ}C$ 이상에서 $\alpha$-$FeSi_2$로 상변태함을 알 수 있었다.

화력발전소 매립 석탄재의 분쇄가 지오폴리머의 강도에 미치는 영향 (Grinding Effects of Coal-Fired Pond Ash on Compressive Strength of Geopolymers)

  • 이수정;강남희;전철민;주형태
    • 자원리싸이클링
    • /
    • 제23권6호
    • /
    • pp.3-11
    • /
    • 2014
  • 화력발전소 바닥재는 입자크기의 범위가 넓고 미연탄소 함량이 높아 지오폴리머의 원료로 잘 사용되지 않는다. 지오폴리머의 원료로서 바닥재가 대부분인 매립 석탄재를 대량 재활용하기 위한 가공공정을 평가하기 위하여 로드밀과 유성볼밀로 분쇄하여 지오폴리머의 강도에 미치는 영향을 알아보았다. 기계적 분쇄가 바닥재의 비정질 함량 변화에 미치는 영향은 거의 없었다. 이는 석탄재의 주요 결정질 상인 뮬라이트가 침상으로 존재하는데, 침상의 뮬라이트는 높은 강도와 인성을 갖기 때문에 비정질화되기 어렵기 때문으로 판단된다. 그러나 분쇄 효과는 입자크기를 감소시켰으며 매립 석탄재 입자의 크기 분포를 보다 균일하게 하여 알칼리와의 반응성을 증가시켰다. 로드밀은 상대적으로 입자크기의 범위를 좁게 만들었지만 입자크기 감소효과는 적었다. 그럼에도 불구하고 로드밀의 분쇄는 최대 약 37%의 압축강도를 증가시켰으며, 이는 유성볼밀의 효과와 동일하였다. 로드밀 분쇄는 매립 석탄재의 반응성을 증가시켜 지오폴리머의 원료로 대량 재활용하기에 적합한 공정이다.

미생물 기원의 나선형 및 협막구조물에 형성된 침철석과 레피도크로사이트의 결정화작용 (Mineralization of Geothite and Lepidocrocite on the Twisted-stalk and Sheathed-filaments from the Microbial Origin)

  • 박천영;조상섭
    • 자원환경지질
    • /
    • 제42권6호
    • /
    • pp.549-559
    • /
    • 2009
  • 연구 목적은 미생물기원으로 추측되는 나선형구조물과 협막구조물에 형성된 침철석과 레피도크로사이트의 광물화작용, 그리고 철수산화물 중에 함유된 중금속함량의 특성을 해석하고자 하였다. 오염된 지하수와 비오염된 지하수의 Cl과 Br의 함량 그리고 Cl/Br의 비율을 이용하여 본 지하수의 오염 정도를 비교해본 결과 인간 활동에 의하여 오염이 진행된 것으로 나타났다. 황갈색 철수산화물을 구성하는 주성분은 $Fe_2O_3$$SiO_2$로 나타났다. $Fe_2O_3$ 함량은 58.57wt.%에서 75.73 wt.% 범위이고, $SiO_2$ 함량은 5.8 wt.%에서 16.17 wt.% 범위로 나타났다. 황갈색 철수산화물에 고 함량으로 함유된 중금속원소는 Zn(최대 6,160 mg/kg), Pb(최대 377 mg/kg), U(최대 503 mg/kg), Cr(최대 203 mg/kg) Cu(최대 77 mg/kg), V(최대 162 mg/kg) 및 Ni(최대 105 mg/kg) 등이다. 래스상과 엽편상의 결정들 그리고 침상의 결정들이 나선형구조물과 협막구조물에 발달 돤 것이 관찰되었다. 황갈색 철수산화물에 대한 x-선 회절분석에서 침철석, 석고 및 레피도크로사이트가 관찰되었다.

Ba-ferrite 박막의 제조 및 자기적 특성에 관한 연구 (The Preparation and Magnetic Properties in Ba-ferrite Film)

  • 서정철;김대성;하태양;이재광
    • 한국자기학회지
    • /
    • 제13권2호
    • /
    • pp.64-69
    • /
    • 2003
  • Si 기판 위에 $\alpha$-Fe$_2$O$_3$을 하지층으로 하는 Ba-ferrite 박막을 pulsed laser deposition system으로 제조하여 결정학적 및 자기적 성질을 X선 회절, SEM, Mossbauer 분광법 및 VSM을 사용하여 연구하였다. $\alpha$-Fe$_2$O$_3$박막은 Si 기판위에 PLD를 이용하여 기판온도 400 $^{\circ}C$, 산소압력 0.1 Torr로 5분간 증착 하였고 그 위에 두께를 달리하여 Ba-ferrite 박막을 제조하였다. Ba-ferrite 결정은 가늘고 긴 모양의 결정립들로 형성되었으며 두께에 따라 그 모양과 상태가 변화하였다. Mossbauer 분광법으로부터 Ba-ferrite 결정내의 Fe 원자의 스핀 방향은 두께가 얇을수록 하지층의 영향으로 기판에 수직으로 정렬하려는 경향을 보이고 있음을 확인하였다. 자기이력곡선의 각형비 역시 두께가 얇을수록 더 크며 이러한 특성은 수평에 비하여 수직의 경우가 더 강하게 나타났다. 보자력 역시 같은 경향을 보이나 포화자화의 값은 수평의 경우에 더 큰 값을 나타내었다. 결정구조는 Magnetoplumbite로서 두께가 작아질수록 결정상수 $\alpha$는 감소하고 c는 증가하는 경향을 보였다.

Phyllactinia corylea (Pers.) Karst에 의(依)한 가중나무 흰가루병(病) (Notes on Powdery mildew of Ailanthus altissima caused by Phyllactinia corylea (Pers.) Karst)

  • 김기청
    • 한국산림과학회지
    • /
    • 제4권1호
    • /
    • pp.9-13
    • /
    • 1965
  • Powdery mildew of Ailanthus altissima Sw. was first reported by J.S. Park in Korea, 1961. According to his report, this disease was found on the leaves of this tree species collected in Jeongup, 1957, and in Taejon, 1958. He described morphological characters of this pathogen and described also that the causal fungus may be closely related with Phyllactinia corylea. This disease which appears dusty grayish yellow molds under surface of leaves was collected again by the author in Kwangju, 1962. The present works were undertaken to make clear the species of causal fungus by means of the morphology and pathogenecity. According to the following results, the pathogen was identified as Phyllactinia corylea (Pers.) Karst. Morphological characters of the fungus Mycelia persistent or more or less evanescent; matured conidia solitary, aseptate, short-clavate to clavate to clavate, hyaline or yellowish, granulate, $44.6-89.2{\times}9.3-24.2{\mu}$, average $64.8-17.8{\mu}$ in size; conidiophores elongate clavate or columnar, hyaline, 2-3 septate, $122.8-346.0{\times}3.7-7.4{\mu}$, average $208.8{\times}6.3{\mu}$; per-thecia usually scattered, rarely gregarious, dark brown to black, depressed globose to globose, $223.2-297.6{\mu}$, average $267.8{\mu}$ in diameter; appendages 12-19, usually 15 in number, hyaline, straight, needle-shaped, sharply pointed at the apex and bulbous at the base, aseptate, $93.0-310.0{\times}5.0-8.0{\mu}$, average $173.3{\times}6.4{\mu}$ in size; asci elongate ellipsoidal to broadly clavate, hyaline, more or less stalked, 8-13 in number, $68.5-76.6{\times}26.1-34.2{\mu}$, average $71.4{\times}29.0{\mu}$ in size; ascospores 2-4, usually 2 in number, hyaline or yellowish, aseptate, ellipsoidal or ovate, $27.7-34.2{\times}14.7-17.9{\mu}$, average $25.5{\times}13.9{\mu}$ in size. Pathogenicity of the fungi In order to make clear the species of the fungus and the pathogenic differences of Phyllactinia fungi which are collected around the contaminated area and seemed to be related to Ailanthus powdery mildew, some inoculation experiments were performed. 1. Cross inoculation to several tree species with their pathogen: Tested materials; Phyllactinia in question on Ailanthus altissima Sw. Ph. fraxini (DC.) Homma. On Alnus firma S. et Z. Ph. moricola (P. Henn.) Homma on morus alba L. According to the results of the experiments, the reactions were all negative with the exception of the original hosts of tested fungi. 2. Inoculation to Picrasma ailanthoides Planch. : The appearance of symptom on the leaves of P. ailanthoides is not distinct, but more or less mycelial growth. Therefore, under the optimal condition in glass chamber, it may be possible to success artificially.

  • PDF

질소침투 열처리한 STS 410 및 410L 마르텐사이트계 스테인리스강의 템퍼링에 의한 조직변화 (Microstructural Changes during Tempering Treatment of Nitrogen-permeated STS 410 and 410L Martensitic Stainless Steels)

  • 이해정;공정현;이해우;유대경;강창룡;성장현
    • 열처리공학회지
    • /
    • 제20권2호
    • /
    • pp.84-93
    • /
    • 2007
  • Microstructural changes during tempering at the temperature range of $300^{\circ}C{\sim}700^{\circ}C$ for the nitrogen-permeated STS 410 and 410L martensitic stainless steels has been investigated. After nitrogen permeation at temperature between 1050 and $1150^{\circ}C$, the surface layer appeared fine $Cr_2N$ of square and rod types in the martensite matrices. Hardness of the nitrogen-permeated surface layer represented 680Hv and 625Hv, respectively, for 410 and 410L steels. It is considered that the fine homogeneously dispersive effect of precipitates by nitrogen caused the increased hardness. Due to the counter current effect of carbon from interior to surface during nitrogen diffusion from surface to interior, the 0.1%C alloyed 410 steel showed the low nitrogen content of 0.025% compared with 0.045% of 410L steel at the distance of $100{\mu}m$ from the surface. Tempering of nitrogen-alloyed 410 and 410L showed the maximum hardness at $450^{\circ}C$. This maximum hardness was considered to be the secondary hardening effect of very fine carbide and nitride. The decrease in hardness at $700^{\circ}C$ was the softening effect of the matrix due to the precipitation of many needle-shaped $Cr_2N$ for 410 steel and the precipitation of coarse nitride of $Cr_2N$ in line with the spherical precipitates with directionality for 410L steel. For 410 steel, the corrosion resistance of nitrogen permeated surface in the solution of 1 N $H_2SO_4$ were nearly unchanged, however the superior corrosion resistance was obtained for nitrogen permeated 410L steel compared to the solution annealed condition.

FeN/Co/Cu/Co계 spin-valve형 다층악의 자기저항 특성 (Magnetoresistance characteristics of EeN/Co/Cu/Co system spin-valve type multilayer)

  • 이한춘;송민석;윤성호;김택기
    • 한국자기학회지
    • /
    • 제10권5호
    • /
    • pp.210-219
    • /
    • 2000
  • 질화철(FeN)막을 이용한 FeN/Co/Cu/Co와 FeN/Co/Cu/Co/Cu/Co/FeN 다층막의 자기저항효과를 조사하였다. 질소유량이 0.4 sccm 이상인 조건에서 제작한 FeN막의 결정구조는 $\alpha$-Fe와 $\varepsilon$-Fe$_3$N상의 혼합상이며 침상구조인 $\varepsilon$-Fe$_3$N상에 의해 유도되는 형상자기이방성 때문에 자기저항효과가 관찰된다. 자기저항효과는 FeN막의 질소 유량과 두께에 따라서 달라지며 이는 FeN막의 $\varepsilon$-Fe$_3$N상에 의해 유도되는 형상자기이방성이 자유층과 고착층에 미치는 범위가 질소유량과 두께에 따라 달라지기 때문이다. 자유층인 Co막의 두께가 70 $\AA$인 조건에서 가장 우수한 자기저항비와 자기저항감도를 나타내며 자기저항비는 질소유량이 0.5 sccm이고 두께가 250 $\AA$인 조건에서 제작된 FeN/Co/Cu/Co/Cu/Co/FeN 다층막에서 3.2 %로 최대값을 나타낸다. 이 다층막의 3개의 자성층은 각기 다른 보자력을 갖고 있으므로 자기저항곡선상에 각각의 보자력 차이에 의한 step을 형성하며 MRAM 등으로 응용시 4개의 신호를 동시에 구현할 수 있을 것으로 기대된다.

  • PDF

고슴도치의 구강 편평상피암종의 세포학적 고찰 1증례 (Cytologic Aspects of Oral Squamous Cell Carcinoma in a Captive African Hedgehog (Altelerix albiventris))

  • 조향미;최을수;이해범
    • 한국임상수의학회지
    • /
    • 제30권3호
    • /
    • pp.214-217
    • /
    • 2013
  • 3세령의 암컷 고슴도치(Atelerix albiventris)가 심하게 종대된 하악 병변의 평가를 위해 내원하였다. 세포학적 검사를 위해 세침흡인을 실시하였으며, 도말표본을 제작 후 로마노프스키식 염색으로 염색하였다. 세포학적 검사에서 원형을 포함한 다양한 모양의 편평상피세포가 주로 관찰되었으며, 일부 세포는 유사 방추 모양 또는 매우 길쭉한 모양을 띄고 있었다. 세포학적 소견은 편평상피암종이었으며, 조직검사를 위해 수술적으로 제거하였다. 조직병리상 악성 편평상피암종세포들이 중등도의 콜라겐과 방추형 섬유모세포로 이루어진 간질에 둘러싸여 있었으며, 인접한 골격근과 골조직으로의 침습이 관찰되었다. 종양세포는 중등도의 세포 대소부동과 핵 대소부동을 보였으며, 중등도 이상의 각화상태를 보였다. 종양의 중심부에서는 극세포해리가 있었으며 림프형질세포 및 호중구성 염증소견이 동반되었다. 유사 분열상은 고배율에서 2-3개가 관찰되었다. 이와 같은 소견에 기초해서 편평상피암종으로 진단하였으며, 보호자는 종괴의 수술적 제거 후 더이상의 치료를 원치 않아 바로 퇴원하였다. 환자는 추가 처치 없이 3개월 생존 후 폐사하였다.

단결정 실리콘 제조용 석영유리도가니의 결정화에 대한 연구 (Study on the crystallization of quartz glass crucibles for preparation of single crystal silicon)

  • 임종원;김태희;박경봉
    • 한국결정성장학회지
    • /
    • 제28권3호
    • /
    • pp.99-105
    • /
    • 2018
  • 본 연구에서는 단결정 실리콘 제조수율에 영향을 미치는 것으로 알려진 석영도가니 표면의 불균일한 결정화를 피하기 위해, 결정화촉진제로 Ba이 포함된 코팅용액을 제조하여 분무열분해법으로 코팅 후, 열처리에 따른 석영도가니 표면의 결정화를 조사하였고, 다음과 같은 결과를 얻었다. 코팅하지 않은 도가니의 경우 온도가 상승함에 따라 $1350^{\circ}C$에서부터 결정화가 진행되는 것을 알 수 있었으며, $1450^{\circ}C$가 되어서야 균일하게 결정화가 되는 것을 확인하였으며, 결정상은 ${\beta}$-cristobalite로 확인되었다. Ba이 코팅된 도가니는 $1000^{\circ}C$부터 결정화가 진행되고 $1300^{\circ}C$에서 전체적으로 도가니 표면에 균일하게 결정화가 진행되는 것을 알 수 있었다. Ba이 코팅된 도가니는 결정상으로 ${\alpha}$-cristobalite와 침상 결정의 $BaSi_2O_5$이 생성되었다가 소멸하며, ${\beta}$-cristobalite 상이 최종적으로 균일한 결정상으로 남는 것을 알 수 있다.

임플랜트의 표면처리 방법이 골유착에 미치는 영향에 관한 연구 (THE EFFECT OF VARIOUS SURFACE TREATMENT METHODS ON THE OSSEOINTEGRATION)

  • 최정원;김광남;허성주;장익태;한종현;백홍구;최용창
    • 대한치과보철학회지
    • /
    • 제39권1호
    • /
    • pp.71-83
    • /
    • 2001
  • The purpose of this study was to compare the effects of various surface treatments by measuring removal torque on bone healing around titanium implants. 40 Screw-shaped cp titanium implants with length of 4mm, outer diameter of 3.75mm, and pitch-height of 0.5mm were used Group 1 was left as machined(control), Group 2 was blasted with $50{\mu}m\;Al_2O_3$, group 3 was blasted and etched in etching solution($NH_4OH : H_2O_2:H_2O= 1 : 1 : 5$) at $90^{\circ}C$ for 1 minute group 4 was blasted and oxidated under pure oxygen at $800^{\circ}C$. The implant surface roughness was analyzed with SEM and CLSM(Confocal Laser Scanning Microscope) and implants were placed in proximal tibial metaphysis of 10 New Zealand White rabbits. After 3 months of healing period, removal torque of each implant was measured to compare bone healing around implant. The results obtained were as follows 1. In SEM view, blasting increased the roughness of the surface, but etching of that rough surface decreased the roughness due to the removal of the tip of the peak. Oxidation also decreased the roughness due to formation of needle-like oxide grains on the implant surface. 2. The Sa value from CLSM was least in the machined group($0.47{\mu}m$), greatest in blasted group($1.25{\mu}m$), and the value decreased after etching($0.91{\mu}m$) and oxidation($0.94{\mu}m$). 3. The removal torque of etched group(24.5Ncm) was greater than that of machined group(16.7Ncm) (P<0.05), and was greatest in the oxidated group(40.3Ncm) and the blasted group(34.7Ncm).

  • PDF