• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.309-319
• /
• 2016

There is a need to develop a data quality management algorithm in order to improve the quality of health care data. In this study, we developed a data quality control algorithms associated diseases related to diabetes in patients with hypertension. To make a data quality algorithm, we extracted hypertension patients from 2011 and 2012 discharge damage survey data. As the result of developing Data quality management algorithm, significant factors in hypertension patients with diabetes are gender, age, Glomerular disorders in diabetes mellitus, Diabetic retinopathy, Diabetic polyneuropathy, Closed [percutaneous] [needle] biopsy of kidney. Depending on the decision tree results, we defined Outlier which was probability values associated with a patient having diabetes corporal with hypertension or more than 80%, or not more than 20%, and found six groups with extreme values for diabetes accompanying hypertension patients. Thus there is a need to check the actual data contained in the Outlier(extreme value) groups to improve the quality of the data.

• Journal of Korean Society of Forest Science
• /
• v.65 no.1
• /
• pp.48-53
• /
• 1984

Using the Duff and Noland's method, the annual ring growth patterns of the red pine in the natural stands were examined at two locations; Seocheon, Chungnam-do where the stand had been infested with the pine needle gall midge, Thecodiplosis japonensis, during the years from 1975 to 1978, and Hongsong, Chungnam-do where had been no incidence of the insect damage. The results obtained are as follows: 1) With the normal red pine of 13 year old, the growth pattern in the oblique sequence indicates that the annual growth rates are maximum at the few terminal internodes, and decrease gradually with the downward internodes. Such characteristic of the growth pattern is not clear in the horizontal sequence of annual rings. 2) The indications of the radial growth reduction of the pine tree due to the pine gall midge infestation could be examined with any of three series at the crown level internodes; horizontal, vertical and oblique series. For the basal internodes, however, the horizontal series appeared to be inadequate for the analysis of the damage impact because it seemed to be masked by various factors other than direct effects of the damage. 3) Of the three ways of radial growth analyses, oblique sequence seems to be the most usefull, especially for the detection of the impact on growth caused by incipient or light infestation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.14 no.3
• /
• pp.199-208
• /
• 2014

At present, the effect of oriental treatment system is proved in the west and using the data of tongue and pulse of body, the doctor can decide the patient's body state without Xray and CT data of large machines. In this paper, the patient's medical data is transmitted to the doctor and the real time decision algorithm is developed and so the doctor can decide the medical treatments. Using the mobile phone, the pulse data and bio data can be sent to the doctor and therefore the patients, who can't care in real time, can be treated in real time in the impossible medical treatment areas. Therefore in this paper, the oriental medical treatment system algorithm and artificial intelligence electrical needle simulation are processed for real time and checked and treated, so anyone can decide patient's state using mobile phone.

• Journal of Conservation Science
• /
• v.33 no.3
• /
• pp.167-179
• /
• 2017

In this study, Sangpyeontongbo excavated at Bigyeongdo, Seosan, were investigated to determine the components of the corrosion products that were formed while they were buried underwater in an anaerobic environment. The causes of corrosion product formation were also determined. Microstructure observation, element mapping, principle component analysis for each year, and the detection of corrosion products were carried out. Results indicate that the concretions of corrosion products on the surface are needle-, hexahedral-, and octahedral-shaped; Pb, Cu, and S were among the elements detected. The Cu-S layer was clearly verified using element mapping. An analysis of major elements for each layer showed that Cu, S, and Pb were present and that most Zn was eliminated. The corrosion products detected were $PbCO_3$ (concretion) and $Cu_{1.96}S$ (metal). Accordingly, the anaerobic corrosion properties of Sangpyeongtongbo are summarized as follows: dezincification, copper sulfide, and lead compound.

• Quality Improvement in Health Care
• /
• v.3 no.1
• /
• pp.78-93
• /
• 1996

Background : The goal of this study was to establish the QA items and guidelines for preventing and improving of safety management. Therefore we investigated the nurses' recognition and knowledge of the safety and risk procedures and policies, and the agreement between the nurses beliefs on the degree of importance of those procedures and policies, with actual implementation in hospitals. Method : The subjects of this study were 201 nurses who participated in a program called continuing education for nurses, which held in December, 1993. Result: The results of this study were as follows: 1. Among 18 types of hospital risks, the items that scored highest or the need of closer attention in safety management was the needle stick, medication errors, falling, and bed sores. 2. In most questions of the 18 incidences, the nurses showed that the estimated result would have positive signs except for hospital infections, burns, and bed sores. 3. Even though the survey shows that incidences and types of occurences varies according to the person's age and the time of incident, they mostly occur between midnight to 6AM. Falls and bed sores can be seen more in the elderly. Medications errors, hospital infections and burns are frequently found between the ages of one through twenty. 4. There was a higher mean score for recognizing the importance of those items than the importance of implementing them. Conclusion : In summary, nurses did perceive the need of safety management but the hospital policy for proper safety management was not established. So we recommended that the hospital administration would undertake an early detection and proper management system for hospital precautions, based on QA items & guidelines presented in this study.

• Journal of Digital Contents Society
• /
• v.18 no.2
• /
• pp.403-410
• /
• 2017

In this paper, the fire extinguisher maintenance system using smart NFC communication and the real-time pressure measurement is proposed. The proposed system consists of three steps in the flow of information. The first step is to identify the fire extinguisher through NFC tagging in the fire extinguisher module using the smart device. The fire extinguisher appearance check and the real-time pressure measurement is performed in the second step, and the last step sends the check status information to the management server. In particular, the actual pressure value is calculated based on the angle of the green area and the indicating needle. Some experiments are conducted so as to verify the proposed system, and as a result, the proposed system shows that the administrator can effectively control the status information of fire safety check.

• Journal of Ocean Engineering and Technology
• /
• v.35 no.5
• /
• pp.327-335
• /
• 2021

Microcracks can rapidly grow and develop in high-strength steels used in offshore structures. It is important to render these microcracks harmless to ensure the safety and reliability of offshore structures. Here, the dependence of the aspect ratio (As) of the maximum depth of harmless crack (a_hlm) was evaluated under three different conditions considering the threshold stress intensity factor (Δk_th) and residual stress of offshore structural steel F690. The threshold stress intensity factor and fatigue limit of fatigue crack propagation, dependent on crack dimensions, were evaluated using Ando's equation, which considers the plastic behavior of fatigue and the stress ratio. a_hlm by peening was analyzed using the relationship between Δk_th obtained by Ando's equation and Δk_th obtained by the sum of applied stress and residual stress. The plate specimen had a width 2W = 12 mm and thickness t = 20 mm, and four value of As were considered: 1.0, 0.6, 0.3, and 0.1. The a_hlm was larger as the compressive residual stress distribution increased. Additionally, an increase in the values of As and Δk_th(l) led to a larger a_hlm. With a safety factor (N) of 2.0, the long-term safety and reliability of structures constructed using F690 can be secured with needle peening. It is necessary to apply a more sensitive non-destructive inspection technique as a non-destructive inspection method for crack detection could not be used to observe fatigue cracks that reduced the fatigue limit of smooth specimens by 50% in the three types of residual stresses considered. The usefulness of non-destructive inspection and non-damaging techniques was reviewed based on the relationship between a_hlm, a_NDI (minimum crack depth detectable in non-destructive inspection), a_{cr N} (crack depth that reduces the fatigue limit to 1/N), and As.

• Parasites, Hosts and Diseases
• /
• v.57 no.3
• /
• pp.299-302
• /
• 2019

A clonorchiasis case in a captive leopard cat, Prionailurus bengalensis euptilurus, was confirmed by ultrasonographic findings and egg morphologies found in the bile juice sample in the Korea. The leopard cat was introduced from the wild habitat of Gyeongsangnam-do, to Cheongju Zoo in Cheongju-si, Chungcheongbuk-do, Korea in August 2014. Physical examinations were basically performed for quarantine and check-up health. The cat was comparatively good in health except anorexia. The cyst-like bile duct dilation and the increased echogenicity of gall bladder wall and hepatic parenchyma were observed by ultrasonography. Ultrasound-guided needle biopsy was conducted for collecting bile juice and the specimens were observed under light microscope. The numerous small trematode eggs were detected in the bile juice sample of the light microscopy. The eggs were $25-33(28{\pm}3){\mu}m$ by $18-22(20{\pm}1){\mu}m$ in size and showed typical characteristics of Clonorchis sinensis egg, i.e., a dominantly developed operculum, shoulder rim and dust-like wrinkles in surface. To treat the liver fluke infection, 20 mg/kg of praziquantel was orally administered only once to the case. Follow-up studies including fecal examinations were conducted during 2 years after treatment. But no more eggs were detected from the case. In the present study, we described the first clonorchiasis case of leopard cat, which was confirmed by ultrasonographic findings and egg morphologies from the bile juice sample in Korea.

• Journal of Radiation Protection and Research
• /
• v.44 no.3
• /
• pp.118-126
• /
• 2019

Background: Government conducts environmental radioactivity surveillance for verification purpose around nuclear facilities based on the Nuclear Safety Law and issues a surveillance report every year. This study aims to evaluate the short and the long-term fluctuation of radionuclides detected above MDC and their origins using concentration ratios between these radionuclides. Materials and Methods: Sample media for verification surveillance are air, rainwater, groundwater, soil, and milk for terrestrial samples, and seawater, marine sediment, fish, and seaweed for marine samples. Gamma-emitting radionuclides including $^{137}Cs$, $^{90}Sr$, Pu, $^3H$, and $^{14}C$ are evaluated in these samples. Results and Discussion: According to the result of the environmental radioactivity verification surveillance in the vicinity of nuclear power facilities in 2017, the anthropogenic radionuclides were not detected in most of the environmental samples except for the detection of a trace level of $^{137}Cs$, $^{90}Sr$, Pu, and $^{131}I$ in some samples. Radioactivity concentration ratios between the anthropogenic radionuclides ($^{137}Cs/^{90}Sr$, $^{137}Cs/^{239+240}Pu$, $^{90}Sr/^{239+240}Pu$) were similar to those reported in the environmental samples, which were affected by the global fallout of the past nuclear weapon test, and Pu atomic ratios ($^{240}Pu/^{239}Pu$) in the terrestrial sample and marine sample showed significant differences due to the different input pathway and the Pu source. Radioactive iodine ($^{131}I$) was detected at the range of < $5.6-190mBq{\cdot}kg-fresh^{-1}$ in the gulfweed and sea trumpet collected from the area of Kori and Wolsong intake and discharge. A high level of $^3H$ was observed in the air (Sangbong: $0.688{\pm}0.841Bq{\cdot}m^{-3}$) and the precipitation (Meteorology Post: $199{\pm}126Bq{\cdot}L^{-1}$) samples of the Wolsong nuclear power plant (NPP). $^3H$ concentration in the precipitation and pine needle samples showed typical variation pattern with the distance and the wind direction from the stack due to the gaseous release of $^3H$ in Wolsong NPP. Conclusion: Except for the detection of a trace level of $^{137}Cs$, $^{90}Sr$, Pu, and $^{131}I$ in some samples, anthropogenic radionuclides were below MDC in most of the environmental samples. Overall, no unusual radionuclides and abnormal concentration were detected in the 2017's surveillance result for verification. This research will be available in the assessment of environment around nuclear facilities in the event of radioactive material release.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.315-321
• /
• 2012

Fate of acetamiprid and imidacloprid aerially sprayed to control pine wood nematode (Bursaphelenchus xylophilus) were studied in a forest of Haman area. Acetamiprid 20% SL or imidacloprid 20% DC were diluted 100 times and applied two times as rate of 50 L/ha using an aircraft of Bell 206 L helicopter. Average acetamiprid deposits on forest floor ranged from 2 to 4% of standard aerial application rate. Following to the second application, acetamiprid deposits in the pine needle ranged 1.8~8.5 mg/kg and then gradually decreased to 1.2~2.1 mg/kg after 48 days. Deposits on the plant washed off by rainfall and reached to soil surface was ca. 17% of the application rate. All of acetamiprid on the ground resided in the forest floor covering the soil surface, where acetamiprid residues were decreased to a quarter at 48 days after the second application, but they were not detected in soil beneath it. And the only low level of acetamiprid residues, 0.0003 mg/L, was detected in the reservoir nearby the experimental forest on the day of aerial application. The acetamiprid detection was presumably due to spray drift. And average imidacloprid deposits on forest floor ranged from 1 to 3% of standard aerial application rate. Following to the second application, imidacloprid deposits in the pine needle analysed very low concentration of 0.1 mg/kg, but the amount of imidacloprid in wash-off in standard and two-fold treatment were ca. 8% and 4% of the application rate, respectively. Most of imidacloprid on the ground also resided in the forest floor, where imidacloprid residues were decreased to a twentieth at 111 days after the second application, and they were detected below 0.5% of the application rate in sol beneath it. And the low level of imidacloprid, 0.0003~0.0017 mg/L, were detected in the streams in the experimental forest. It was not to the level of contamination concerns.