• Physical Therapy Rehabilitation Science
• /
• v.11 no.1
• /
• pp.97-104
• /
• 2022

Objective: Flexed posture commonly increases with age in older adults and is characterized by kyphosis and forward head posture. Changes in the posture with age affect both balance and mobility. This study was conducted to examine the effects of a cervical stabilization exercise for community-dwelling older adults to improve balance. Design: Two groups pretest-posttest design. Methods: Fifty older adults were randomly assigned into the cervical stabilization exercise group (n=24) and control group (n=25). The cervical stabilization exercise group (n=24) participated in group exercise for 60 minutes twice a week over 4 weeks. Timed up and go test (TUG), four square step test (FSST), functional reach test (FRT), postural sway, cervical range of motion (CROM), proprioception, craniovertebral angle (CVA) were evaluated before and after the intervention. Results: TUG, FSST, FRT, CROM, Proprioception, CVA showed significantly greater improvement, compared with a control group (p<0.05). Conclusions: Findings of this study demonstrate that cervical stabilization exercise can help improve not only neck functional capacities but also balance. Therefore, it may be used as an effective balance exercise program for community-dwelling older adults.

• Korean Journal of Bronchoesophagology
• /
• v.8 no.2
• /
• pp.43-46
• /
• 2002

Branchial cleft cysts are most common neck masses in adults. Most are second branchial cysts, which occur in the neck, anterior to sternocleidomastoid muscle at the mandibular angle. Rarely these cysts may be present in the parapharyngeal space. We report a case of a second branchial cleft cysts in the parapharyngeal space of 32-year-old female, which was misdiagnosed as peritonsillar abscess. It was excised via transoral and transcervical approach.

• Journal of Powder Materials
• /
• v.22 no.4
• /
• pp.247-253
• /
• 2015

The sintering mechanisms of nanoscale copper powders have been investigated. A molecular dynamics (MD) simulation with the embedded-atom method (EAM) was employed for these simulations. The dimensional changes for initial-stage sintering such as characteristic lengths, neck growth, and neck angle were calculated to understand the densification behavior of copper nano-powders. Factors affecting sintering such as the temperature, powder size, and crystalline misalignment between adjacent powders have also been studied. These results could provide information of setting the processing cycles and material designs applicable to nano-powders. In addition, it is expected that MD simulation will be a foundation for the multi-scale modeling in sintering process.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.18 no.3
• /
• pp.183-187
• /
• 2018

Complex cervical spine fractures are a serious complications of maxillofacial trauma and associated with high mortality and neurological morbidity. Strict vigilance in preventing further insult to the cervical spine is a crucial step in managing patients who are at risk for neurologic compromise. We report a rare case of a right transverse process of atlas fracture with right-sided vertebral artery injury that was associated with a comminuted fracture of the body and angle of the mandible, which restricted mouth opening. Airway management was performed by an awake fiber-optic nasotracheal intubation, where neck movement was avoided with a cervical collar. Vertebral artery injuries may have disastrous consequences, such as basilar territory infarction and death, and should be suspected in patients with head and neck trauma. After mandibular plating, the patient was on cervical collar immobilization for 12 weeks and anti-coagulant therapy.

• Journal of TMJ Balancing Medicine
• /
• v.11 no.1
• /
• pp.37-40
• /
• 2021

Objectives: The purpose of this study is to report the effect of Korean medical treatment using Yin-yang Balancing Therapy of TMJ (YBT) on correcting posture. Methods: During the admission period, the patient was treated by Korean medical treatment (YBT, acupuncture, herb medicine, etc) every each day. The standard intraoral balancing appliance was used in patient while sleeping and exercising. Results: After treatment for 35th, the angle changed from 23 degrees to 0 degree. The posture of the neck and shoulder became straight. The distorted facial midline was aligned straight. Conclusions: These results showed that YBT have an effect on correcting posture.

• Journal of Fashion Business
• /
• v.15 no.1
• /
• pp.80-91
• /
• 2011

The purpose of this study is to evaluate the differences of visual effects and visual images by variations in shoulder angle and shoulder width of power shoulder jacket. The stimuli are 5 samples: One control group, 2 variations of the angle of shoulder line and 2 variations of the width of shoulder line. The data has been obtained from 87 fashion design majors. The data has been analyzed by Factor Analysis, Anova, Scheffe's Test and the Correlation Analysis. The results of the study are as follows: The visual images by the angle and the width of shoulder line of power shoulder jacket are composed of 4 factors : attention, stiffness and softness, masculinity, and trendiness. Among these factors, attention factor is estimated by the most important factor. The visual effects by the angle and the width of shoulder line of power shoulder jacket are composed of 3 factors : whole silhouette, neck and arm figure, upper body figure. In these factors, the whole silhouette is estimated by the most important factor. The power shoulder jacket with extreme changes in shoulder angle has double images: it looks trendy and classy but also gives an awkward image. In case of changes in shoulder width, the visual evaluation shows big differences with the degree of expansion. The visual evaluation with variation in angle has stronger image and effect than that in width. The power shoulder jacket trend itself is also evaluated that variation in angle reflects the trend better than that in width.

• Clinical and Experimental Otorhinolaryngology
• /
• v.11 no.4
• /
• pp.275-280
• /
• 2018

Objectives. Middle vault deviation has a significant effect on the aesthetic and functional aspects of the nose, and its management continues to be a challenge. Spreader graft and its modification techniques have been focused, but there has been scarce consideration for removing surplus portion and balancing the upper lateral cartilage (ULC). This study aimed to report the newly invented triangular-shaped resection technique ("triangular resection") of the ULC and to evaluate its efficacy for correcting middle vault deviation. Methods. A retrospective study included 17 consecutive patients who presented with middle vault deviation and underwent septorhinoplasty by using triangular resection at a tertiary academic hospital from February 2014 and March 2016. Their outcomes were evaluated pre- and postoperatively including medical photographs, acoustic rhinometry and subjective nasal obstruction using a 7-point Likert scale. Results. The immediate outcomes were evaluated around 1 month after surgery, and long-term outcomes were available in 12 patients; the mean follow-up period was 9.1 months. Nasal tip deviation angle was reduced from $5.66^{\circ}$ to $2.37^{\circ}$ immediately (P<0.001). Middle vault deviation also improved from $169.50^{\circ}$ to $177.24^{\circ}$ (P<0.001). Long-term results were $2.49^{\circ}$ (P=0.015) for nasal tip deviation and $178.68^{\circ}$ (P=0.002) for middle vault deviation. The aesthetic outcome involved a complete correction in eight patients (47.1%), a minimally visible deviation in seven patients (41.2%) and a remaining residual deviation in two patients (11.8%). Pre- and postoperative minimal cross-sectional areas (summation of the right and left sides) were 0.86 and 1.07, respectively (P=0.021). Fifteen patients answered about their nasal obstruction symptoms and the median symptom score had alleviated from 6.0 to 3.0 (P=0.004). Conclusion. Triangular resection of the ULC is a simple and effective method for correcting middle vault deviation and balancing the ULCs without complications as internal nasal valve narrowing.

• The korean journal of orthodontics
• /
• v.14 no.1
• /
• pp.75-92
• /
• 1984

This study attempted to analyze the distribution of stress, to examine the bending effect in the mandible according to the pulling directions and determine on which pulling directions are adequate when an orthopedic force was applied to the mandible. An orthopedic force, 500gm, was applied to the gnathion, one point of the chin area, in three directions. The three directions were ; high puli' from gnathion to the center of condyle head, and vertical pull, from gnathion to a parallel line with the posterior border of the ramus, and medium pull, from the gnathion to a parallel line with the lower border of mandible. The distribution of principal stress, bending moment and amount of displacement within the mandible was analyzed by a 3-dimensional finite element method and that of the various portions of mandible were computed and compared according to the pulling directions. The results were as follows : 1. The bending moment of each part of a mandible has been found to be markedly larger in case of vertical pull than in case of either high pull or medium pull. In vertical pull the bending moment turned out to largest at the condyle head and neck portion, the gonial angle portion, the coronoid portion and the ascending ramus portion, respectively, while comparatively large at the cuspid and bicuspid portion and the first molar portion. In case of high pull it was largest at the gonial angle portion and becoming smaller at the coronoid portion, the ascending ramus portion, the condyle head and neck portion, and the cuspid and bicuspid portion, in that order. In case of medium pull, however, the bending moment was largest at the condyle head and neck portion, becoming smaller at the first molar portion, the ascending ramus portion, the coronoid portion, the cuspid and bicuspid portion, and gonial angle portion, in that order. 2. As for the bending effect it was calculated to be mostly oriented downward at the mandibular body and backward at the mandibular ramus in both high pull and vertical pull. In case of medium pull it was oriented upward at the mandibular body and forward at the mandibular ramus. 3. The bending effect also turned out to be mostly oriented outward in case of high pull and medium pull, and inward in vertical pull. 4. At the mandibular body and ramus, the bending effect in the upward-downward direction and that in the forward-backward direction were found to be larger than in the inward-outward direction. 5. If and when we expect any correcting effect on the mandibular protrusion by means of the chin cup appliance, we can say sure as conclusion that high pull and vertical pull are more effective than medium pull.

• Progress in Medical Physics
• /
• v.26 no.2
• /
• pp.106-111
• /
• 2015

In Tomotherapy the couch sags during the treatment due to the weight of the patient. In this study, we developed a simple method to obtain the amount of the sag and the pitch angle of the couch using the image processing technique of MVCT images in Tomotherapy. Using the method we evaluated the sag and pitch of couch for 22 head and neck patients and one craniospinal irradiation (CSI) patient. The sag and the average pitch angle of couch were 0.40~1.54 mm and $0.7^{\circ}$ for head and neck patients, respectively. For head and neck patients, the sag increased as the longitudinal length of the irradiation volume increased and the pitch angle showed no relationship with the longitudinal length. For the CSI patient the sag was 4.97 mm. Using the method the amount of the couch sag could be measured easily and the measured data could be useful in determination of margins considering the table sag error.

• Archives of Plastic Surgery
• /
• v.36 no.5
• /
• pp.629-636
• /
• 2009

Purposes: Wide scars occurring on the lower face and neck are a source of both functional and esthetic problems. Consequently, we can use skin grafts, pedicled flaps, free flaps, and tissue expansion for the reconstruction of this area. Compared with other reconstruction techniques, tissue expansion is advantageous in that it enables the maintenance of a color and texture similar to that of the adjacent tissue. However, the conventional method of tissue expansion has been reported to lead to an unnatural cervicomental angle and to the deformity of adjacent structures. We have therefore made efforts to prevent these problems through the use of several operative procedures. Methods: Forty-one patients with lower facial and cervical scars underwent tissue expansion. The tissue expansion was performed using a rectangular-shaped Nagosil$^{(R)}$ tissue expansion device. On insertion of the tissue expander, the intermediate area of superficial fat layer was dissected and then the tissue expander was inserted to make a flap that was as thin as possible. In advancement of the flap, a capsule-formed by the tissue expander-was used for the interrupted fixed suture of the flap to the fascia of the platysma muscle of the neck. This procedure was performed multiple times and also performed between the flap and the periosteum of the mandible, such that the tension was removed during the suture of the flap margin. Finally, the patients were fitted with a Jobst$^{(R)}$ facial garment in order to stabilize the operation site at least twelve months. Results: The most prevalent location of the scar was the cheek (15 cases), followed by the chin in 14 cases and the neck in 12 cases. The mean size of scar was $55.7{\pm}39.4cm^2$. Conclusions: Using our procedures, we have experienced no significant deformities and have also achieved a more natural cervicomental angle in the patients.