• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.1248-1253
• /
• 2011

It is increasing construction of long span railway bridge with concrete track system for speed up of railway and efficient maintenance of track. As the sleeper of the concrete track system layed on a bridge is fixed on deck of the bridge, the displacement of the sleeper and deck is same. Therefore, the spacing between two sleeper installed at the end of the adjacent deck near the expansion joint of bridge becomes vary according to the longitudinal expansion of a deck by temperature change. By the way, if the spacing of sleepers become increase excessively, it causes large bending stress of in a rail, and it can leads failure or reduction of fatigue life of the rail. Further more, the excessive displacement of the rail may induce decrease ride comfort as well as corrugation of rail surface. Therefore, it is required to determine the allowable maximum sleeper spacing to prevent such problems. For the purpose, investigation on the influence factor on sleeper spacing for straight track was carried out. Variation of bending moment in a rail, wheel force, and the ratio of primary and secondary deflection of the rail according to sleeper spacing was investigated, and, as a result, the maximum allowable sleeper spacing at the bridge expansion joint was suggested.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.419-431
• /
• 2007

The track and rail surface geometry is of prime importance on the requirement for track dynamic stiffness, particularly for the speed of 350 km/h, for which both the requirement for fatigue and tensile strength limits require a lower stiffness than 100 kN/mm, which is near the value for ballasted track. However, the track quality has been considered as being the same for 350 km/h as that for 300 km/h, and based on ballasted track, and the track geometry may be kept in better condition with a slab track(probably more similar to the medium quality track geometry of ballasted track). In conclusion, under the condition that the track geometry quality provided by the concrete slab system is fairly good, and that the required maintenance is applied to the rail surface, there would be no safety risk if the fastening system point stiffness reaches 160 kN/mm for 300 km/h operation, and 110 N/mm at 350 km/h.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1386-1391
• /
• 2007

The ballast gravels are often contaminated by various pollutants, like diesel fuel, lubricants, and heavy metals. Especially, the gravels near the switching are apt to be polluted by the lubricant. Because this lubricant can pollute the soil of track, the contaminated ballast gravels should be cleaned immediately. In this study, a physical desorption method was used to remove the oil contaminants from the surface of the ballast gravels. Thermosetting resin was used as a media for physical remediation of ballast gravels. The total petroleum hydrocarbon of the gravels was monitored over time. In addition, scanning electron microscopic images were obtained to observe the removal of the oily pollutants from the surface of the gravels.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1125-1131
• /
• 2005

This study is based on the assumption of surface transport linkages between Korea and China. Active economic cooperation between South Korea and North Korea are expected within the near future and Russia and China have interested in the land transport linkages in Korean peninsula. How much freight demands between the two countries that has been mainly dependent on air and sea transportation so far may convert the transport mode to surface transportation are estimated. Particularly, freight demands between South Korea and China's three northeast provinces are focused. The sensitivity analysis depends on transport time and transport cost changes is included. The modal shifts is estimated to be more sensitive to the changes in transport costs than those in transport time, suggesting the importance of transport costs of rail and road. Despite the dearth of data on the surface transport operation in North Korea, the attempts made in this study to estimate the demand conversion are hope to provide reference points for potential effects of the rail and road transport connections between China and the Korea peninsula before our discussions expand to the establishment of freight transport network of the northest Asia and, moreover, the Eurasian continent.

• Wind and Structures
• /
• 제35권3호
• /
• pp.177-191
• /
• 2022

Trains emerging on a streamlined bridge-girder may have salient interference effects on the aerodynamic properties of the bridge. The present paper aims at investigating these interferences by wind tunnel measurements, covering surface pressure distributions, near wake profiles, and flow visualizations. Experimental results show that the above interferences can be categorized into two primary effects, i.e., an additional angle of attack (AoA) and an enhancement in flow separation. The additional AoA effect is demonstrated by the upward-moved stagnation point of the oncoming flow, the up-shifted global symmetrical axis of flow around the bridge-girder, and the clockwise-deflected orientation of flow approaching the bridge-girder. Due to this additional AoA effect, the two critical AoAs, where flow around the bridge-girder transits from trailing-edge vortex shedding (TEVS) to impinging leading-edge vortices (ILEV) and from ILEV to leading-edge vortex shedding (LEVS) of the bridge-girder are increased by 4° with respect to the same bridge-girder without trains. On the other hand, the underlying flow physics of the enhancement in flow separation is the large-scale vortices shedding from trains instead of TEVS, ILEV, and LEVS governed the upper half bridge-girder without trains in different ranges of AoA. Because of this enhancement, the mean lift and moment force coefficients, all the three fluctuating force coefficients (drag, lift, and moment), and the aerodynamic span-wise correlation of the bridge-girder are more significant than those without trains.

• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.3587-3595
• /
• 2015

본 연구에서는 저비용의 저심도 도시철도시스템을 구축하기 위하여 산업부산물인 고로슬래그 미분말, 플라이애시 및 급냉 전기로 산화슬래그를 사용하여 개발된 저탄소 친환경 PC 박스용 콘크리트의 역학적 성능 및 내구성을 평가 하였다. 역학적 특성을 평가한 결과, 재령 1일 압축강도는 모든 조건에서 설계기준강도($f_{ck}$) 35MPa의 90% 이상 강도 발현 하는 것으로 나타나 공기단축 가능으로 건설비용을 절감할 수 있을 것으로 판단된다. 또한, 소요의 물성 및 설계기준강도($f_{ck}$) 35MPa를 만족하는 범위에서 시멘트 단독 사용 조건보다 염소이온침투성 및 확산계수가 낮게 나타나 내염성능이 우수한 것으로 나타났으며, 동결융해 저항성 및 화학저항성의 경우에도 내구성능이 우수한 것으로 나타났다. 따라서 저탄소 친환경 PC 박스용 콘크리트를 사용할 경우, 시멘트 제조 시 발생되는 이산화탄소 및 환경부하를 저감할 수 있을 것으로 기대된다.

• 한국지반환경공학회 논문집
• /
• 제22권7호
• /
• pp.13-20
• /
• 2021

2015년 4월 개통한 호남고속철도 근처 노반의 침하 문제가 지속적으로 제기되고 있으며 이에 따라 호남고속철도 인근지역의 지반 안정성 또한 문제가 있을 수 있다. 위험지도를 제작하는데 있어서 지표 및 지표를 결정하는 인자를 선정하는 것은 매우 중요하다. 기존의 위험지표는 관측된 기간 중 가장 마지막 관측날을 기준으로한 최종 변위량으로 산정하는데 침하 원인과 지표의 거동을 분석하기 위해서는 시계열적인 지표변위를 확인해야한다. 또한 광범위한 지역의 경우 직접 수준측량을 실시하기에 경제적으로 비효율적이므로 SAR 영상을 이용해 지표변위를 관측하고자 하였다. 본 논문에서는 PS-InSAR기법을 이용해 시계열 지표변위를 관측하였으며 위험지표를 결정하기 위한 인자로 최종지표변위량, 누적지표변위량, 최소변위량과 최대변위량의 차를 이용해 각 인자로 위험도를 등급화하여 비교하였다. 그 결과 최종변위량의 위험도 등급과 각 인자 간 위험도 등급이 상이하였으며 위험지표를 결정하는데 있어 다양한 관점의 인자를 추가하는 것을 제안하였다. 이는 지반침하의 원인을 찾고 해결방안을 모색하는데 있어 중요한 연구가 될 것으로 기대한다.

• 한국철도학회논문집
• /
• 제16권3호
• /
• pp.163-168
• /
• 2013

장기간 수명주기(Life Cycle)을 갖는 도시철도차량은 초기 도입비용보다 유지보수비용이 많은 비중(60%~70%)을 점유하고 있으므로 효율적인 유지보수 연구를 통하여 유지보수 비용의 절감과 대형시스템의 수명연장을 추구하는 일이 무엇보다 시급하다. 이를 위해 신뢰성기반의 유지보수체계에 대해 여러 산업분야의 국내 외 사례 조사 분석을 통해 도시철도차량 신뢰도/가용도 관리시스템을 구성하였다. 본 연구에서는 이 시스템이 가져야 할 주요 기능을 상세히 정하고 성공적인 시스템 개발이 될 수 있도록 관련 시스템을 개발하였다. 본 논문은 성공적으로 개발이 완료된 도시철도차량 신뢰도/가용도 관리시스템에 관한 내용을 기술한 것이다.

• Structural Engineering and Mechanics
• /
• 제61권2호
• /
• pp.245-253
• /
• 2017

The increasing lack of good quality soils allowing the development of roadway, motorway, or railway networks, as well as large scale industrial facilities, necessitates the use of reinforcement techniques. Their aim is the improvement of the global performance of compressible soils, both in terms of settlement reduction and increase of the load bearing capacity. Among the various available techniques, the improvement of soils by incorporating vertical stiff piles appears to be a particularly appropriate solution, since it is easy to implement and does not require any substitution of significant soft soil volumes. The technique consists in driving a group of regularly spaced piles through a soft soil layer down to an underlying competent substratum. The surface load being thus transferred to this substratum by means of those reinforcing piles, which illustrates the case of a piled embankment. The differential settlements at the base of the embankment between the soft soil and the stiff piles lead to an "arching effect" in the embankment due to shearing mechanisms. This effect, which can be accentuated by the use of large pile caps, allows partial load transfer onto the pile, as well as surface settlement reduction, thus ensuring that the surface structure works properly. A technique for producing rigid piles has been developed to achieve in a single operation a rigid circular pile associated with a cone shaped head reversed on the place of a rigid circular pile. This technique has been used with success in a pile-supported road near Bourgoin-Jallieu (France). In this article, a numerical study based on this real case is proposed to highlight the functioning mode of this new technique in the case of industrial slabs.

• 한국산학기술학회논문지
• /
• 제17권11호
• /
• pp.604-609
• /
• 2016

본 논문에서는 추가 용지 없이 철도노선의 선로 용량을 증대시킬 수 있는 RSR(철도보강노반)의 장기성능을 평가하고 자 한다. 철도보강노반은 짧은 보강재를 강성벽체와 일체화하는 특징을 갖고 있어 협소한 공간에서의 적용이 가능하다. RSR의 장기성능을 평가하기 위한 시험시공은 높이 7m, 연장 40m의 규모로 장항선 주포역에서 실시되었다. 동 구간은 집중 호우로 인하여 노반이 붕괴된 구간으로 버스가 운행하는 도로가 인접한 구간이다. 시공 후 2년에 걸친 장기간의 계측을 통하여 새로운 형식의 철도보강노반에 대한 성능을 검증하였다. 성능평가를 위한 장기계측은 지표 및 원 지반 침하, 벽체 수평변위, 보강재 인장 변형률, 인접선로 레일의 연동침하에 대하여 실시하였다. 계측에 대한 분석결과 현 시점까지 철도노반으로서의 안전성 및 사용성은 충분히 확보 되고 있는 것으로 평가되었다. RSR기술은 쌓기재 부족현장 과 안전도 확보가 중요한 운행선 인접현장, 용지 경계 민원 발생구간 등을 중심으로 그 활용성이 높아질 것으로 기대된다.