• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.2
• /
• pp.15-18
• /
• 1979

Deposited film of a transition metal, Ti was diffused into LiNbO3 crystals to form integrated optical waveguides. By suppressing L O out -diffusion, single-mode waveguides could be constructed. Measurements on characteristics were performed by using the prise coupling technique and a He-Ne laser. ( λ = 0.6328 $\mu$m)

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.4
• /
• pp.467-478
• /
• 2016

In this paper, we try to find the optimal locations of NeNB(Nomadic evolved NodeB)s for maximizing the overall throughput of the PS-LTE networks. Since finding optimal locations of all NeNBs in a given area is NP-hard(Non-deterministic Polynomial time-hard) problem, we proposed a PSO-based heuristic approach. In order to evaluate the performance, we conducted two experiments. We compared performance with other schemes such as Exhaustive Search, Random Walk Search, and locating neighboring NeNBs with the same NeNB-to-NeNB distance. The proposed method showed the similar results to the exhaustive search method in terms of locating optimal position and user's data throughput. The proposed method, however, has the fast and consistent convergence time.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.141-141
• /
• 2003

전기-광 효과를 이용한 광변조기, 스위치 등의 소자 구현을 위해 고품질의 Ti:LiNbO$_3$ 광도파로 제작은 필수적이다. LiNbO$_3$ 광도파로는 양자교환(APE) 및 Ti 확산 법으로 제조할 수 있으며 전자의 경우 ne 는 증가, no는 감소되는 경향이 있어 편광도 파로의 제작에 용의하며 후자의 경우 ne 와 no 모두 증가하는 도파로 특성을 갖는다. 이러한, 도파로 소자의 특성 향상을 위해서는 Li out-diffusion 이 억제된 손실이 적은 도파로 제작이 필수적이다. 본 연구에서는 Ti 내부 확산법을 이용한 LiNbO$_3$ 광도파로를 확산분위기를 조건으로 하여 제작하였으며, 온도에 따른 각 이온의 반응 메커니즘에 관하여 관찰하였다.

• Korean Journal of Optics and Photonics
• /
• v.9 no.6
• /
• pp.423-427
• /
• 1998

Two wave mixing experiments in $LiNbO_3$, $BaTiO_3$ are carried out, and the characteristics as optical information processing device are investigated. Examined crystals are commonly used ones, such as 0.03% mol Ce-doped $BaTiO_3$, 0.03% mol Fe-doped $LiNbO_3$, and 6% mol MgO-doped $LiNbO_3$. $Ar^+$ ion laser is used as the writing beam, and He-Ne Laser is used as the reading beam. The recording-decay and erasing characteristics of diffraction gratings, the time constants, and also the angular selectivities are measured for each crystals and compared.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.286-287
• /
• 2000

최근에 광연결(optical interconnection)을 위한 목적으로 LiNbO$_3$(0.03 mol% Fe doped)결정에 광굴절(photorefractive) 도파로를 기록하는 방법이 소개되고$^{(1-2)}$ 있는데 제작 방법과 원리는 다음과 같다. 17mW 출력의 He-Ne 레이저광을 렌즈로 통과시켜 빔의 크기를 줄인 후 초점은 LiNbO$_3$크리스털에 입사하는 반대편 면에 맞추어 입사시킨다. 그림 1에서 +y방향으로 초점이 입사면을 통과할 때까지 크리스털을 이동시켜 도파로를 만든다. 이 때 이동하는 방법은 10ms 노광시킨 후 15$mu extrm{m}$씩 불연속적으로 움직여 나간다. (중략)

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.7
• /
• pp.94-103
• /
• 1995

Thin film acoustooptic beam deflector in proton-exchanged Y-cut LiNbO$_{3}$ was fabricated and measured. The planar waveguide was fabricated by using the proton-exchanged and annealing method in Y0cut LiNbO$_{3}$. Interdigital transducer for SAW(surface acoustic wave) was made by the laser lithography. Using above method, the thin film acoustooptic beam deflector was constructed. Its SAW wavelength was 20.mu.m at 174MHz center frequency. The interaction length between guided optical wave and SAW was 2.16mm. The measured 3dB bandwidth was 17MHz using He-Ne laser. And 70% diffraction efficiency was obtained at 970mW RF driving power.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.288-293
• /
• 2000

BPM simulation was used in order to fabricate the LiNbO$_3$optical waveguide with optical source of He-Ne laser(λ=0.6328[$\mu$m]). we observed electric field E$_{x}$, E$_{y}$ in the x,y-direction are simulated at the LiNbO$_3$substrate (X1 55[$\mu$m]$\times$Z1 5000[$\mu$m]), where the depth, width and buffer layer of waveguide are 0.2[$\mu$m],4[$\mu$m] and 0.02[$\mu$m] respectively. By applying these parameters of single waveguide to simulate a X-switch, we have chosen index change of 0.002, width of 3[$\mu$m] and angle of 0.4$^{\circ}$~0.6$^{\circ}$of optical waveguide and under these conditions, optical beam propagates cross-side at 0.4$^{\circ}$. When applied switching voltage of 25[V], optical beam of X-switch turns cross-side to bar-side at intersection angle 0.4$^{\circ}$, index change of 0.002, waveguide width of 3[$\mu$m], electrode gap 2[$\mu$m]. By the above results, we can obtain design conditions of theoretical analysis of an X-switch optical waveguide.e.e.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.48-54
• /
• 2001

We investigate the generation of the dark spatial soliton and its role of wave guiding in Fe doped$LiNbO_3$ A cw Ar+ laser of 488 nm is used for the generation of the dark spatial soliton. The generation of the dark spatial soliton is observed even at the laser intensity as low as 10 mW/cm2. The self-defocusing effect is observed when the direction of the intensity variation is parallel to the optic axis, while it can't be seen when perpendicular to the axis. So, it is verified that the refractive index change is generated parallel to the optic axis. When 633 nm He-Ne laser beam is injected into the dark spatial soliton, the beam propagates just as in the diffraction free medium. So, it is verified that the dark spatial soliton can act as a waveguide.eguide.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.385-388
• /
• 2000

Electromagnet ic wave falling on solid surface acts on the medium with a force. This force brings about a redistribution of surface charges and the surface potential is varied. By measuring this potential variations, the surface electrical properties on conductors, semicionductors and dielectrics can be tested. In this paper, two dimensional photocharge voltage on the $LiNbO_3$ wafer induced by He-Ne laser beam, the temperature characteristics and the capacitive coupling test structure for the photocharge voltage measurement for the dielectrical materials are shown.

• Journal of Internet Computing and Services
• /
• v.9 no.2
• /
• pp.35-42
• /
• 2008

Mobile IP is a solution to support mobile nodes, however, it does not handle NEtwork MObility (NEMO). The NEMO Basic Support (NBS) protocol ensures session continuity for all the nodes in the mobile network. Since the protocol is based on Mobile IP, it inherits the same fundamental problem such as tunnel convergence, when supporting the multicast for NEMO. In this paper, we propose the multicast route optimization scheme for NEMO environment. We assume that the Mobile Router (MR) has a multicast function and the Nested Mobile Router Information (NeMRI) table. The NeMRI is used to record o list of the CoAs of all the MRs located below it. And it covers whether MRs desire multicast services. Any Route Optimization (RO) scheme can be employed here for pinball routing. Therefore, we achieve optimal routes for multicasting based on the given architecture. We also propose cost analytic models to evaluate the performance of our scheme. We observe significantly better multicast cost in NEMO compared with other techniques such as Bi-directional Tunneling, Remote Subscription, and Mobile Multicast based on the NBS protocol.