• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1120-1125
• /
• 2004

Welding characteristics of STS304 stainless steel and Inconel 600 using a continuous wave Nd:YAG laser are experimentally investigated. Alloy 600 being used in steam generator tubing of pressurized water reactor(PWR) exposed to some corrosion environment, stress corrosion cracking can occur on this material. Presented here are the results from a series of experiments in which dissimilar metal welds were made using the gas tungsten arc welding process with pure argon shielding gas. But It is well known that solidification cracking susceptibility of austenitic alloys depends on the solidification temperature range and amount/distribution of solute rich liquid that exists at the terminal stages of solidification. An experimental study was conducted to determine effects of welding parameters and to optimize those parameters that have the most influence on eliminating or reducing the extent welding zone formation at dissimilar metal welds.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.421-426
• /
• 1995

The magnetic properties of the hot-pressed magnets made from the Fe-Nd-B alloys, mechanically ground and subsequently blended with binary additives such as Al-Cu and Ag-Zn before hot pressing, were investigated. The coercivities of the magnets increased as the concentration of Al-Cu increased up to 1 wt.% or up to 3 wt.% in the case of Ag-Zn. At higher concentrations the coercivities decreased markedly. The maximum gain in coercivity by the addition was about 20 %. typical values of $_{i}H_{c}$ and $B_{r}$ of a hotpressed magnet containing 1 wt.% Al-Cu were 18 kOe and 7 kG, respectively. It was found that Cu, Ag, and Zn, which diffused into the magnet during hot pressing, were mostly concentrated on the Nd-rich grain boundary phase whereas Al was present not only in the grain boundary region but also in the matrix grains.

• 한국세라믹학회지
• /
• 제33권12호
• /
• pp.1421-1425
• /
• 1996

Sintered Si3N4 and Inconel composed of Ni(58-63%) Cr(21-25%) Al(1-17%) Mn(<1%) fe(balance) were pressurelessly joined by using Ag-Cu-Ti brazing filler metal at 950℃ and 1200℃ under N2 gas atmosphere of 1atm and their interfacial structures were investigated. In case that the reaction temperature was low as 950℃ its interfacial structure was "Inconel metal/Ti-rich phase layer/brazing filler metal layer/Si3N4 " Ti used as reactive metal existed in between inconel steel and brazing metal and moved to the interface of between brazing filler metal nd Si3N4 according as reaction temperature increased up to 1200℃. The interfacial structure of inconel steel-Si3N4 reacted at 1200℃ was ' inconel metal/Ni-rich phase layer containing of Fe. Cr and Si/Cu-rich phase layer containing of Mn and Si/Si3N4 " Cr Mn, Ni and Fe diffused to the interface of between brazing filler metal and Si3N4 and reacted with Si3N4 The most reactive components of ingredients of inconel metal were Cr and Mn. On the other hand Ti added as reactive components to Ag-Cu eutectic segregated into Ni-rich phase layer,.

• 한국식품영양학회지
• /
• 제32권6호
• /
• pp.711-716
• /
• 2019

Red Chinese cabbage is rich in anthocyanins, with beneficial effects on anti-obesity and lipid profiles. The purpose of this study was to examine the anti-obesity effects of red Chinese cabbage. Four-weeks old Spague-Dawley male rats were divided into four groups for six weeks as follow: Normal Diet (ND), High Fat Diet (HFD), HFD + Red Chinese Cabbage Diet (RCD), HFD + Red Chinese Cabbage Juice (RCJD). After six weeks, the liver weight was significantly higher in the HFD group than in the other groups, and the RCD and RCJD groups showed similar values to the ND group. The epididymal fats were significantly higher in all high fat diets (HFD, RCD, RCJD) than in the ND group and there was statistical significance in the post-tests when comparing the RCD and RCJD groups with the HFD group. Triglycerides significantly decreased in the RCD group. In conclusion, red Chinese cabbage is rich in anthocyanins, with beneficial effects on organ weight and lipid profiles.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.175-184
• /
• 1993

Nd-Fe-B계에 Co와 Al을 첨가한 자석합금을 진공유도용해로에서 제조하여 이들 합금을 단롤법으로 melt-spun시켜 급냉리본을 얻었다. 제작된 급냉리본의 냉각속도에 따른 자기적 성질의 변화를 조사하였고, 최적의 급냉속도에서 제작된 리본을 파쇄하여 resin bond 자석을 제조하였으며, 이들 급냉리본 및 bond자석의 자기적 성질, 미세구조, 결정구조에 관하여 연구, 조사하였다. 이들 급냉리본의 자기적 성질은 급냉속도에 따라 크게 변하였으며 20m/sec전후에서 최적의 자기적 성질을 보였다. 이때의 급냉리본의 미세조직은 Nd-rich의 입계상이 미세한 N$d_2$F$e_14$B결정립을 둘러싼 cell 형의 구조였으며, 특히 Al이 2.1at%첨가된 리본시료에서는 iHc=15.5KOe, Br=7.8KG, (BH)max=8.5MGOe의 자기적 성질을 나타내었다. 최적의 급냉속도에서 제작된 리본을 polyamide resin과 2.5wt%의 비율로 혼합하여 상온에서 성형, 결합시켜 제작한 bond자석에서 보다 현저히 향상되었으며 유지시간이 8분인 경우 iHc=10.8KOe, Br=7.3KG, (BH)max=8.0MGOe의 값을 가졌다. 한편, 자구구조는 maze pattern이 주로 관찰되어 자화용이축인 C축이 배열되었으며 bond자석에서보다 hot-press 자석에서 자구폭이 보다 작았다.

• 암석학회지
• /
• 제21권2호
• /
• pp.235-247
• /
• 2012

우리나라 백령도, 제주도, 보은, 아산, 평택, 간성일대에는 맨틀 페리도타이트들이 알칼리 현무암류에 포획되어 온 형태로 분포하고 있다. K-Ar 전암연대측정 자료에 의하면 이들 화산암류는 약 0.1-18.9Ma에 분출하였다. 페리도타이트의 광물조합은 감람석-사방휘석-단사휘석-첨정석이며, 함수광물이나 석류석이 보고된 바는 없다. 암석의 종류는 레어조라이트에서 하즈버가이트에 걸쳐있다. 감람석은 $Fo_{88.4-92.0}$이고, 단사휘석은 투휘석, 사방휘석은 엔스터타이트가 풍부하며, 첨정석은 Cr이 풍부하다(Cr# = 7.8-53.6). 주성분 원소함량에 의하면 이들 페리도타이트는 부화된 중앙해령현무암 근원 맨틀로부터 대략 26%까지의 부분용융을 겪은 후에 남은 잔류물로 추정된다. 그러나 맨틀에서의 이차적인 변성교대작용의 흔적이 미량원소의 함량에 기록되어 있는 경우도 있다. 양휘석 지온계에 의하면 우리나라 페리도타이트 포획암의 평형온도는 대략 $850-1050^{\circ}C$ 범위이다. Sr-Nd 동위원소비는 결핍된 중앙해령현무암의 근원맨틀 성분(DMM)에서부터 지구전암(BSE) 성분 값까지 넓은 범위에 걸쳐있어, 오랜 시간의 성장과 진화의 역사를 대변하고 있다. Sr-Nd-Pb 동위원소비에 의하면 우리나라 암석권 맨틀은 대개 맨틀 단성분 중 DMM과 EM2의 혼합으로 설명되며, 상부 대륙지각과 연계될 수 있는 남북 내지는 동서방향으로의 지역성을 기록하고 있지는 않다. 이는 동아시아의 신생대후기 판내부기원 현무암류들이 기록하고 있는 남북간의 이분성과는 매우 대조적인 것으로, 동아시아 연약권 맨틀의 지역성을 시사하고 있다. Os 모델연대에 기초하면 우리나라 암석권 맨틀이 연약권으로부터 분리된 시기는 약 1.8-1.9 Ga로 추정된다.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.275-279
• /
• 2011

Sterilization of Escherichia coli (E. coli) is examined using a unique pulsed ultra-violet (UV) elliptical reactor based on Nd:YAG laser resonator, UV radiation from a pulsed xenon flashlamp. The light from the discharge has a broadband emission spectrum extending from the UV to the infrared region with a rich UV contained. Sterilization method by using the UV light is fast, environment-friendly and it does not cause secondary pollution. A Nd:YAG laser resonator having elliptical shape has advantage of concentrating the radiation of the UV light at two foci as the quart sleeve filled with E. coli. The primary objective of this research is to determine the important parameters such as pulse per second (pps), the applied voltage for sterilizing E. coli by using an UV elliptical reactor. From the experiment result, the sterilization effect of UV elliptical reactor is better than that of UV cylindrical reactor, and it can be 99.9% of sterilization at 800V regardless of the pps within 10 minutes.

• 한국식품조리과학회지
• /
• 제20권6호
• /
• pp.708-711
• /
• 2004

Swedish research in 2002 indicated that acrylamide formation was particularly associated with traditional high temperature cooking processes of certain carbohydrate-rich foods. Since the Swedish report, similar findings have been reported by researchers in numerous other countries. In 2003, three hundred and twenty seven domestic food products, selected on the basis of annual sales in Korea, were analyzed. The results were similar to those from other countries. In this study, the monitoring of acrylamide was expanded to include Korean traditional food products. Samples were purchased from local markets, prepared and then analyzed using LC/MS/MS methods. The categorized food products analyzed included cooked rices and porridges, soup products, fried products, boiled down products, seasoned products, roasted products and coffee. The acrylamide concentrations of the samples were $ND\~18ppb$ in cooked rices and porridges, $ND\~28ppb$ in soup products, $ND\~22ppb$ in fried products, $ND\~218ppb$ in boiled down products, <10ppb in seasoned and roasted products, and <10\~11ppb in brewed coffee and coffee drinks.

• Journal of Magnetics
• /
• 제18권3호
• /
• pp.235-239
• /
• 2013

The effect of Dy addition on the microstructure and magnetic properties of the sintered NdFeB magnets was investigated. The results of the microstructure analysis showed that Dy-free and Dy-doped samples are composed of $Nd_2Fe_{14}B$ (P42/mnm) and a trace of Nd-rich phase. Dy addition reduces significantly the pole density factor of (004), (006) and (008) crystal faces as estimated by the Horta formula. Accordingly, the coercivity of the Dy-doped sample increases from 2038 $kA{\cdot}m^{-1}$ up to 2288 $kA{\cdot}m^{-1}$. The $H_{cj}(T)/M_s(T)$ versus $H^{min}_N/M_s(T)$ (Kronm$\ddot{u}$ller-plot) behavior shows that the nucleation is the dominating mechanism for the magnetization reversal in these two kinds of magnets, and two microstructural parameters of ${\alpha}_k$ and $N_{eff}$ are obtained. The Kronm$\ddot{u}$ller-Plot gives evidence for an increase of the ${\alpha}_k$ responsible for an increase of the coercivity as the result of the increase of the magnetic field as the magnetic domain reversed.

• 한국재료학회지
• /
• 제7권12호
• /
• pp.1063-1069
• /
• 1997

급속응고법으로 Fe-Nd-C 합금을 제조하여 합금의 조성 및 제조 조건의 변화에 따른 상변화와 자기특성의 변화를 조사하였다. 강자성 $Fe_{14}Nd_2C_x$가 초정으로 정출할 수 있는지를 알아보기 위하여 냉각속도의 변화에 따른 as-spun 합금에서의 상변화를 조사해 본 결과，10m/s로 제조한 Fe-Nd-C 리본합금은 ${\alphs}-Fe$가 일차상, $Fe_{17}Nd_2C_x$가 이차상으로 존재하는 결정질이었으며. 20m/s에서는 ${\alpha}-Fe$의 정출이 억제되거나 비정질화하여, $Fe_{14}Nd_2C_x$가 일차상, ${\alpha}-Fe$가 이차상으로서 비정질상과 함께 존재하였다. 냉각속도의 증가에 따라 비정질화가 증가하여 30m/s에서는 대부분 비정질화되었으며，40m/s에서 비정질화가 완료되었다. 따라서 $Fe_{14}Nd_2C$는 as-spun 상태에서는 얻어지지 않고 주조합금의 경우와 마찬가지로 열처리를 통한 고상변태에 의해서만 얻을 수 있었다. $Fe_{14}Nd_2C$를 얻을 수 있는 유효온도구역은 주조합금의 경우보다 넓은 $700{\sim}900^{\circ}C$였고，비정질화가 완벽한 합금보다 다소 덜 완벽하거나 $Fe_{17}Nd_2C_x$와 비정질상이 혼합된 합금에서 열처리에 의한 보자력의 향상이 더욱 현저하였다. Fe를 다량 함유한 Fe-Nd-C 조성 중에서 높은 보자력이 기대되는 조성 범위는 극히 제한되어, $750{\sim}800^{\circ}C$에서 몇 분간의 열처리로 10kOe 이상의 높은 보자력을 얻을 수 있는 조성은 77~78 Fe, 7~8 C (at.%) 정도였다.