• Korean Journal of Optics and Photonics
• /
• v.15 no.3
• /
• pp.263-267
• /
• 2004

We have investigated the characteristics of a Nd:YAG laser pumped by a cw Ti:sapphire laser. When the pumping power of the Ti:sapphire laser was 850 ㎽, the maximum output power of the Nd:YAG laser was 450 ㎽. As a result, the slope efficiency for the output power of the Nd:YAG laser was measured to be 56%. We have also investigated the characteristics of a passively Q-switched Nd:YAG laser by using a Cr$^{4+}$:YAG as saturable absorber with initial transmission of 90%. The maximum average output power of 200 ㎽ was obtained with repetition rate of 23.8 KHz and pulse width of 17.0 ns.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.186-186
• /
• 2010

The crack behavior in the ceramic Nd:YAG at a laser-diode end-pumped Nd:YAG ceramic laser was investigated. The fracture critical temperature difference of the ceramic Nd:YAG is about $355^{\circ}C$. The fracture of the 2 at% and the 4 at.% ceramic Nd:YAG occurred more than 14.9 W and 6.9 W pump powers, respectively, under lasing conditions.

• Proceedings of the Optical Society of Korea Conference
• /
• 1998.08a
• /
• pp.82-83
• /
• 1998

• Journal of Oral Medicine and Pain
• /
• v.30 no.4
• /
• pp.447-455
• /
• 2005

The purpose of this study was to examine the effect of Nd:YAG laser irradiation for sensory nerve conduction change. Nd:YAG laser was irradiated to mental region for 5 minutes with the parameters that 10 Hz and 20 Hz of 100 mJ/pulse. Target size of irradiation was 30 mm diameter of circle and target-tip distance was about 10 mm. Therefore, the power density were 212 $mW/cm^2$ and 424 $mW/cm^2$. Sensory nerve conduction was evaluated with $Neurometer^{\circled}$ CPT/C before and after Nd:YAG laser irradiation. As an outcomes, the current perception threshold(CPT) and pain tolerance threshold(PTT) were obtained. We made a comparison of these two values and the results were as follows. 1. There was no significant difference in CPT at 1W, 10 Hz and 2 W, 20 Hz Nd:YAG laser irradiation. 2. There was no significant difference in PTT at 10 Hz, 20 Hz of 100 mJ/pulse Nd:YAG laser. 3. There were no significant differences in CPT and PTT between 1 W, 10 Hz group and 2 W, 20 Hz group. Therefore, We can make a conclusion that Nd:YAG laser irradiation to mental region have no effect on mental nerve conduction in our study model.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1898-1904
• /
• 2003

Laser heat treatment is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power $CO_{2}$ lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of matrensitic structure. In this investigation, the microstructrual features occurring in Nd:YAG laser hardening SM45C and $STD_{11}$ steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimisation of the processing parameters for maximum hardened depth of SM45C and $STD_{11}$ steel specimens of 10mm thickness by using CW Nd:YAG laser.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.222-223
• /
• 2000

지금까지 gold-coated 반사체, cusp-shaped 반사체, 복합 포물 반사체(CPC), 난반사 공동체 등 다양한 형태의 반사체가 횡펌핑을 이용한 Nd:YAG 레이저의 개발을 위하여 고안되어졌다. 횡여기되는 Nd:YAG 레이저의 광학적 효율은 반사체의 형태, 다이오드 레이저의 파장, Nd:YAG 결정의 지름, Nd$^3$의 도핑농도에 따라 영향을 받는다.$^{(1)}$ 본 연구에서는 고출력의 횡여기 Nd:YAG 레이저를 개발할 목적으로 광여기 공동으로 사용된 난반사 공동체의 내부지름과 레이저 매질인 Nd:YAG 결정의 흡수계수 등 매개변수를 변화시켜 흡수분포와 출력을 계산하였으며, 이러한 매개변수들이 기울기 효율에 미치는 영향을 수치 해석적으로 연구해 보았다. 광선추적법에서 사용한 매개변수 중에서 다이오드 레이저의 파장은 808 nm이고, 반사율은 90%이며, 여기 다이오드 출력은 1080 W이다. 난반사 공동체$^{(2)}$ 의 반사율은 95.7%이고, 결정의 투과율은 90%이며, 결정의 반지름은 2.5 mm이다. 사용된 여기 구조도는 그림 1과 같다. 여기헤드는 Nd:YAG 결정, 난반사 공동체, 그리고 3개의 360 W급 다이오드 어레이들로 구성되어 있다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 1989.06a
• /
• pp.107-115
• /
• 1989

A 200 W industrial Nd:YAG laser was developed and its weding applications were investigated. The important factors in designing of an industrial Nd:YAG laser were analyzed and special sedign features were explained. Also, the performance of laser weldings of Zircaloy-4, stainless steel and fine thermocouples was presented.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.30 no.3
• /
• pp.439-447
• /
• 2003

This was performed to evaluate the inhibitory effect of laser on the growth of S. mutans. The bacterial pallets containing S. mutans KCTC 3065 were irradiated with Er:YAG laser and Nd :YAG laser by non-contact method at an intensity of 50mJ for 5 sec with the pulse repetition rates of 10Hz and 30Hz, respectively. The following results were obtained on colony count, acid producing ability, and the amount of insoluble extracellular polysaccharide synthesis. 1. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the proliferation of S. mutans the most, and the irradiation of Er:YAG also inhibited the proliferation. However, the irradiation of Nd:YAG laser alone could not inhibited the proliferation of S. mutans. The pulse repetition rate did not affect significantly on the proliferation of bacteria in overall. 2. The irradiation of Nd:YAG laser after the photosensitization with Chinese ink inhibited the acid production of S. mutans the most for a certain period of time. Er:YAG laser also inhibited acid production. When Nd:YAG laser was used alone, the acid production of S. mutans was not been inhibited. The irradiation of Nd:YAG laser after photosensitization with Chinese ink inhibited the acid production ability of bacteria the most as the pulse repetition rate increased. 3. Laser irradiation did not inhibited the synthesis of insoluble extracellular polysaccharide of S. mutans. From these results, we conclude that the irradiation of Er:YAG laser and Nd:YAG laser after photosensitization with Chinese ink would inhibit the proliferation and acid production by S. mutans, which may prevent dental caries. However, this effect does not last long time so that the laser irradiation should be repeated frequently in order to obtain clinical effect; thus, this laser irradiation would not have a clinical usefulness in preventing dental caries when used solely.

• The Journal of Korean Academy of Prosthodontics
• /
• v.27 no.2
• /
• pp.155-172
• /
• 1989

The purpose of this study is to measure the bonding strength at the enamel and dentin of extracted bovine incisors when they are irradiated by W Nd: YAG, EoQ Nd: YAG, and CW $CO_2$ laser, etched and then attached by composite resin. The laser-irradiated surface, the etched surface after the laser-irradiation and the interface of the treated surface and resin are observed by using scanning electron microscope. The NP Nd:YAG laser is used at the peam power of 207 KW. The EOQ Nd: YAG laser is used at the peak power of 1.15Mk. The CW $CO_2$ laser is used at the energy output of 5W and 10W in enamel; in dentin, at the energy output of 2W. The obtained results were as follows: 1. The shear bond strength of enamel decreased in the following order: EOQ Nd:YAG laser group, NP Nd:YAG laser group, CW $CO_2$ laser groups, unlased group. The unlased group showed a significant difference from EOQ Nd:YAG laser group (P<0.01), NP Nd:YAG laser group (P<0.05), but no significant difference from CW $CO_2$ laser group (P>0.05). 2. The shear bond strength of dentin decreased in the following order: CW $CO_2$ laser group, NP Nd:YAG laser group, unlased group, EOQ Nd:YAG laser group. The unlased group showed a significant difference from CW $CO_2$ laser group (P<0.01), but no significant difference from Nd:YAG laser groups (P>0.05). 3. The scanning electron microscope of enamel revealed irregular microcrack and pore at the surface in the NP Nd:YAG laser group and CW $CO_2$ laser group, but the crackless flat surface in the EOQ Nd:YAG laser group. 4. The scanning electron microscope of dentin revealed obstruction of in most of dentinal tubule and decrease of diameter. 5. The scanning electron microscope of the interface of resin and enamel revealed prominent penetration of resin tag in the EOQ Nd:YAG laser group.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.141-155
• /
• 1997

The purpose of this study was to evaluate the effectiveness of the Nd:YAG laser and the Er:YAAG laser on etching enamel for direct bonding of orthodontic bracket. The advantages of laser etching rather than conventional acid etching are to reduce the subsurface demineralization rate, to inhibit the spillage of acid onto uninvolved ""its of enamel, and to save the clinical manipulation time involving drying, trashing and drying again. 189 freshly extracted human premolars were prepared for this research. 165 out of them were divided into 11 groups of 15 teeth. One group was acid etching and the rest groups were irradiated with Nd:YAG laser by four different energy levels(100mj 10pps, 100mj 20pps, 150mj 20pps, 200mj 20pps) and with Er:YAG laser by six different energy levels(60mj 5pps, 60mj 10pps, 100mj 10pps. 200mj 10pps, 200mj l5pps, 400mj 10pps). Shear bond strength was tested with Instron after 24 hours, one week, and three weeks. Twenty-four out of 189 teeth were divided into twelve groups untreated control, acid etching, and ten laser irradiation subgroups. And the ultrastructural enamel surfaces of each group were observed with scanning electron microscope. The results were as follows; 1. The means and the standard deviations of shear bond strength of Nd:YAG and Er:YAU laser irradiation by different energy levels were obtained. 2. Shear bond strengths of Er:YAG laser irradiation groups were higher than those of Nd:YAG laser irradiation groups at the identical energy level. 3. Maximum bond strengths was achieved at the energy of I50mj, 20pps in Nd:YAG laser irradiation groups or 60mj, 10pps in Er:YAG laser irradiation groups. 4. It was acceptible for direct bonding to irradiate lb0mj 20pps with Nd:YAG laser or to irradiate 60mj 10pps with Er:YAG laser considering the results of shear bond strength tests and SEM obsesvation.