• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.67-69
• /
• 2004

The $Pb(Zr,Ti)O_3$ thin films were fabricated with $Pb(La,Ti)O_3$ buffers in-situ onto $Pt/Ti/SiO_2/Si$ substrates by pulsed laser deposition technique using a Nd:YAG laser with energy density of $2.5J/cm^2$, and deposited for 10 minutes at $550^{\circ}C$ of substrate temperature. And then, the films have been annealed at $550^{\circ}C$ in oxygen ambient pressure. The remanent polarization value is increased by using buffer layers but coercive field of films is slightly increased.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.173-176
• /
• 2004

Silicon thin films on p-type(100) silicon substrate have been prepared by a pulsed laser deposition(PLD) technique using a Nd:YAG laser. The pressure of the environmental gas during deposition was 1 Torr. After deposition, silicon thin film has been annealed in nitrogen ambient. Strong blue photoluminescence(PL) has been observed at room temperature. We report the optical properties of silicon thin films with the variation of the deposition parameters.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.252-253
• /
• 2000

본 실험에서는 수 MW/$ extrm{cm}^2$ 의 매우 낮은 영역의 세기에서 순수한 GaAs의 bulk에 대하여 실험한 결과 비선형 흡수가 나타남을 관찰 하였으며, 더불어 자유전하 흡수 계수를 여러 가지 세기의 빛에서 측정한 결과 자유전하 흡수 단면적이 빛의 세기에 따라 변화하는 것을 관찰하였다.$^{(1)}$ GaAs의 굴절률이 3.6으로 매우 커서 Fabry-Perot 효과가 나타나므로 시료의 한쪽 면을 SiN로 무반사 코팅을 하여 실험 하였다. GaAs의 표면은 쉽게 레이저 빛에 의해 손상을 입는 것을 고려하여 같은 자리에서 여러 번의 실험을 하여 같은 결과가 나오는 것을 확인하여 실험 결과를 얻었다. 사용된 레이저는 Nd:YAG 레이저로서 1.064 $mu extrm{m}$의 파장에서 7 나노초의 펄스를 방출한다. 빛의 세기는 편광기와 half wave plate를 이용하여 변화 시켰다. (중략)

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.9
• /
• pp.64-71
• /
• 2009

Recently as ultrasonic medical devices are gradually developed, many of those require smaller and more precision coaxial cables in the probe. So, the use of micro coaxial cable becomes an efficient solution for ultrasonic machine. However, there are many difficulties in stripping micro coaxial cable by traditional mechanical process. In this paper we use the Nd:YAG laser for the efficient striping of conduct wire of cable. Through some experiments, we found that there is a new possibility in the proposed method. Also, we propose a pre-process of the cable before stripping in order to enhance the performance.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.67-76
• /
• 2013

We present an innovative real-time laser welding monitoring technique employing the correlation analysis of the plasma plume optical emission generated during the process. The plasma optical radiation emitted during Nd:YAG laser welding of S45C steel samples has detected with a Photodiode and analyzed under different process conditions. The discrete DC voltage difference, filter methods and wavelet transform has been used to decompose the optical signal into various discrete series of sequences over different frequency bands. Considering that wavelet analysis can decompose the optical signals, extract the characteristic information of the signals and define the defects location accurately, it can be used to implement process-control of laser welding.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.152-152
• /
• 2000

차세대 평판 디스플레이로 주목박고 있는 FED는 현재 저전압 환경에서 기존의 CRT와 비슷한 해상도와 밝기를 얻지 못하고 있다. 이는 형광체 입자의 표면에 존재하는 결함, 오염, band - bonding과 같은 비발광층과 제조공정 중에 산화되거나 공기중에 노출되어 막 표면이 쉽게 오염되기 때문이다. 따라서 본 연구에서는 전기영동법으로 제작된 형광체의 효율 향상을 위해 레이저 표면 처리효과를 연구하였다. 실험에 사용한 레이저 표면처리 방법은 Nd:YAG pulse(355nm), continuous laser를 이용하였으며 레이저 power와 처리 시간을 변화시키면서 실시하였다. 형광체 막의 표면 두께 측정을 위해 Scanning Electron Microscopy(SEM), 처리된 막의 발광세기를 비교 분석하기 위해 Photoluminescence(PL), Cathodoluminescence(CL) intensity를 측정하였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.154-154
• /
• 2000

FED(Field emission display)의 FEAs(Field emitter arrays)에 형성되어 있는 micro-tip 은 tip 표면의 오염이나 진공내부의 잔류가스에 대단히 민감하다. 특히, emitter 물질의 일함수 및 겉모양 같은 기하학적 요소에 민감한 전계방출 소자의 특성상 tip 선단이 oxidation 될 경우 일함수가 증가하여 전자방출에 필요한 구동전압이 증가하고 전자 방출의 불균일성이 커지는 문제점이 발생한다. 이에 고진공의 동작 환경 및 FEAs 제작과정이나 공기의 노출에 발생하는 tip 표면의 오염물질 제거가 요구된다. 따라서 본 연구에서는 40$\times$40mm2 FEAs에 laser power, scan speed을 달리하며 laser(cw Nd-YAG, 1064nm)을 조사하였다. laser cleaning 효과를 보기 위해 laser irradiation 전, 후에 진공도 5$\times$10-7torr irradiation 후에 emitter tip의 뚜렷한 기하학적 모양의 변화를 볼 수는 없었지만, I-V 특성이 향상 되는 것을 볼 수 있었다.

• Journal of Welding and Joining
• /
• v.20 no.1
• /
• pp.41-46
• /
• 2002

A new laser welding system far the appendage of bearing pads of PHWR nuclear fuel elements has been developed. This system consists of laser oscillator, a optical fiber transmission, a monitoring device and a welding controller. The basic welding experiments of the appendage of Zircaloy-4 bearing pads were carried out. The laser welded samples were investigated and made by using the optical fiber of GI $400\mu\textrm{m}$. As a result, the seam welding with the bead width of 1.0mm and the weld penetration of 0.3mm could be accomplished.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.101-104
• /
• 2002

Simultaneous measurement of turbulent velocity and concentration field in a stirred mixer tank is carried out by using PIV/LIF technique. Instantaneous velocity fields are measured by a $1K\times1K$ CCD camera adopting the frame straddle method while the concentration fields are obtained by measuring the fluorescence intensity of Rhodamine B tracer excited by the second pulse of Nd:Yag laser light. Image distortion due to the camera view-angle is compensated by a mapping function. It is found that the general features of the mixing pattern are quite dependent on the local flow characteristics during the rapid decay of mean concentration. However, the small scale mixing seems to be independent on the local turbulent velocity fluctuation.

• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.48-54
• /
• 2006

A visualization study of flow characteristics in a mixer using multi-nozzle bubbling was performed. The mixer is filled with liquid glycerin (dynamic viscosity = $1000mPa{\cdot}$ s at $25^{\circ}C$) and convective mixing is induced by air bubbles generated from 9 orifices installed on the bottom of the mixer. To visualize the flow field, PIV (Particle Image Velocimetry) system consisting of 532nm Nd:YAG laser, $2k\times2k$ CCD camera and synchronizer is adopted. The bubbles generated with uniform size and frequency form bubble stream, and bubble streams rise vertically without interaction between bubble streams. Mixing efficiency is affected by the height of bubbler and the effective height of bubbler is 20mm from the bottom of the mixer.