Journal of the Korean Society for Precision Engineering (한국정밀공학회지)

Korean Society for Precision Engineering (한국정밀공학회)
권호 표지

Shield Wire Stripping of Micro Coaxial Cable for Medical Device Using Laser

레이저를 이용한 의료기기용 미세 동축케이블의 실드선 탈피

  • Lee, Jeong-Wan (Division of Mechanical Engineering and Mechatronics, Kangwon National University) ;
  • Kim, Jung-Hoon (Division of Mechanical Engineering and Mechatronics, Kangwon National University)
  • 이정완 (강원대학교 기계.메카트로닉스공학부) ;
  • 김정훈 (강원대학교 기계.메카트로닉스공학부)
  • Published : 2009.09.01
Download PDF
⟨ Previous Next ⟩

Abstract

Recently as ultrasonic medical devices are gradually developed, many of those require smaller and more precision coaxial cables in the probe. So, the use of micro coaxial cable becomes an efficient solution for ultrasonic machine. However, there are many difficulties in stripping micro coaxial cable by traditional mechanical process. In this paper we use the Nd:YAG laser for the efficient striping of conduct wire of cable. Through some experiments, we found that there is a new possibility in the proposed method. Also, we propose a pre-process of the cable before stripping in order to enhance the performance.

Keywords

References

  1. Ichikawa, T., Aoyama, S., Matsui, H. and Seya, O.,'Properties of Ultra Coaxial Cable for ElectronicEquipment,' Hitach Cable Review, No. 22, pp. 47-50,2003
  2. Martyniuk, J., 'UV Laser-Assisted Wire Strippingand Micromachining,' AMP Journal of Technology,Vol. 4, No. 1, pp. 77-83, 1995
  3. Futamata, H., Satoh, Y., Watanabe, T., Aoki, H.,Nakazawa, Y., Kojima, S. and Noda, Y., 'MicroCoaxial Cable Assembly,' Fujikura Tech. Rev., No.31, pp. 1-6, 2002
  4. Nakamura, A., Yamamoto, Y., Kunii, M. and Saito, H.,'Micro-coaxial Cable and Assembly for NotebookPCs,' Hitach Cable Review, No. 19, pp. 39-42, 2000
  5. Ready, J., 'Industrial Applications of Lasers,'Academic Press, 1978
  6. Kennedy, C. and Barry, J., 'Stability of an IntracavityFrequence-doubled Nd-YAG Laser,' IEEE Journal ofQuantum Electron, Vol. 10, No. 8, pp. 596-599, 1974 https://doi.org/10.1109/JQE.1974.1068215
  7. Zhu, X., 'A New Method for Determining CriticalPulse Width in Laser Material Processing,' AppliedSurface Science, Vol. 167, No. 3-4, pp. 230-242,2000 https://doi.org/10.1016/S0169-4332(00)00530-4
  8. Jung, J. H. and Uchida, T., 'Development of PowerFeedback Nd:YAG Laser with Waveform controlFunction,' Journal of KWS Vol. 19, No. 4, pp. 366-370, 2001
  9. Weber, R., Beuenschwander, B. and Weber, H. P.,'Thermal Effects in Solid state Laser Materials,' Optical Materials, Vol. 11, No. 2, pp. 245-254, 1999 https://doi.org/10.1016/S0925-3467(98)00047-0
  10. Bang, S. Y., 'Effects of Beam Parameters on ExcimerLaser Ablation,' Journal of the Korean Society forPrecision Engineering, Vol. 22, No. 7, pp. 38-46,2005
  11. Lee, H. C. and Kim, Y. P., 'Output Characteristics ofa Q=Switched Nd:YAG laser with GRM(GaussianReflectivity Mirror),' Hankook Kwanghak Hoeji, Vol.16, No. 2, pp. 152-158, 2005 https://doi.org/10.3807/KJOP.2005.16.2.152
  12. Park,D.Y.,Kim,H.T.andChoi,C.C., 'OutputCharacteristicsandMeasurementof the GainCoefficient of a Pulsed Nd:YAG laser,' HankookKwangHak Hoeji, Vol. 10, No. 1, pp. 53-57, 1999
  13. Gross, A., Kotler, Z. and Lipman, E., 'Multiple BeamMicromaching System for Removing At Least TwoDifferent Layers of A Substrate,' US Patent, No.7176409B2, 2007