• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.103-104
• /
• 2005

본 논문에서는 Nd:YAG($\lambda$=266 nm, pulse) 레이저빔을 PDMS 표면에 조사하여, 소수성 물질인 PDMS를 친수성 물질로 개질하였다. 이미 산소 플라즈마를 이용한 것과 오존을 이용한 PDMS 표면 개질에 관한 논문이 발표되었는데, 레이저를 이용한 표면 개질은 간단한 레이저 빛의 조사만으로 표면을 개질할 수 있는 장점이 있다. 본 논문에서는 레이저를 이용하여 PDMS 를 표면처리한 후에 접촉각 측정기를 이용해서 측정한 결과 접촉각 감소가 있었다. 묘면에 산소 함유량이 증가한 것을 확인함으로써 친수성 물질로의 표면 개질됨을 확인할 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.176-177
• /
• 2005

PDMS는 생명공학 분야에서 중요한 기술적 폴리머이다. Nd:YAG레이저의 4고조파 ($\lambda$=266nm, pulse) 레이저를 사용하여 표면 처리를 하여 PDMS 표면의 습윤성과 접착성의 향상됨을 확인하였다. 식각한 PDMS는 샘물체의 미세회로에 사용될 수 있다. 본 논문은 레이저 빔의 주사속도를 변화시키며 PDMS를 레이저로 식각하며 PDMS의 식각 특성을 연구한다 식각 특성을 의존성이 가장 효과적인 주사 속도에 대한 의존성을 규명하고자 스테이지 컨트롤러의 속도를 변화시키며 실험하였다. 그리고 최적의 레이저 출력값을 알아내려고 레이저 출력값을 조절하며 실험 하였다. 단차측정기(알파스템)을 이용하여 식각형상과 식각 효율 등을 분석하였다.

• 한국광학회지
• /
• 제1권2호
• /
• pp.204-209
• /
• 1990

Nd:YAG 레이저봉을 이용한 간단한 간섭장치를 구성하여 단일펄스 및 고반복률 펌핑 후 레이저봉의 간섭효과에 의한 간섭무늬의 이동갯수를 이용하여 레이저봉의 온도를 측정하였으며, 간섭무늬의 시간적인 변화와 열확산 방정식을 풀어서 얻은 레이저봉의 온도와 비교하였다. 아울러 레이저봉에 누적된 열에너지의 공간분포와 정도를 측정하여 본 연구에서 사용된 금도금된 섬광관 펌핑 반사체에 의한 레이저봉의 펌핑 균일도 및 열전달률을 평가하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2001년도 추계학술발표대회 개요집
• /
• pp.134-139
• /
• 2001

This paper describes the weldability of JIS S45C medium carbon steel (same material with KS SM45C and SAE 1045) for machine structural use by Nd:YAG laser. This material have a limitation to the industrial application in spite of good mechanical characteristics. This is due to its difficult welding work from high carbon contents. We therefore have investigated laser weldability of this material to extend the application of medium carbon steel. The results of this study provide application possibility of Nd:YAG laser welding for medium carbon steel.

• Journal of Welding and Joining
• /
• 제22권1호
• /
• pp.58-64
• /
• 2004

The control of the weld bead shape is important in laser welding of the small parts. The effects of laser welding parameters on the weld bead shape in the pulsed Nd:YAG laser welding of STS 304L material were investigated. Shielding gas type, flow rate, pumping voltage, pulse frequency, pulse width, focal position and overlap distance were selected as laser welding parameters. Experiments were designed and conducted using the Taguchi method which was a statistical experimental method. The weld bead width, penetration, area and aspect ratio were measured and analysed as the weld bead shape properties and the welding parameters were optimized to maximize the weld aspect ratio. Weld aspect ratio were greatly affected by the pulse width, pumping voltage and pulse frequency, and somewhat by the overlap distance, and little by the shielding gas type, flow rate and focal position. A confirmation experiment were conducted using the optimized welding parameters.

• 한국레이저가공학회지
• /
• 제3권1호
• /
• pp.12-20
• /
• 2000

The nuclear steam generators are subjected to corrosion environmental condition during operation that can result in stress corrosion in the tube wall. If any tube wall degradation is recognized, the tube must be repaired by plugging or sleeving. For the sleeving repair, Nd : YAG laser welded sleeving technology is one of the most promising when considering radioactive working conditions in the nuclear power plant. In this paper, the laser welding characteristics of steam generator tube and sleeve materials are investigated. The effects of average laser power, laser energy, welding speed, pulse duration and frequency are evaluated. Based on these results, Nd : YAG laser welded sleeving repair was applied to the degraded steam generator tubes in real environment.

• Current Optics and Photonics
• /
• 제3권3호
• /
• pp.243-247
• /
• 2019

We have developed a compact, wavelength-selectable, Q-switched Nd:YAG laser at mid ultraviolet for chemical warfare agent detection. The fundamental wave at 1064 nm is delivered by a pulsed solid state laser incorporating with a square-type Nd:YAG rod in a resonator closed by two crossed Porro prisms for environmental reliability. The output energy at 213 nm ($5{\omega}$) and 266 nm ($4{\omega}$) by ${\chi}^{(2)}$ process in the sequentially disposed BBO crystals are measured to be 6.8 mJ and 15.1 mJ, respectively. The output wavelength is selected for $5{\omega}$ and $4{\omega}$ by a motorized wavelength switch. The energy ratio of the $5{\omega}$ to the $4{\omega}$ is varied from 0.05 to 0.85 by controlling the phase matching temperature of the nonlinear crystal for sum-frequency generation without change of the output pulse parameters.

• Medical Lasers
• /
• 제10권3호
• /
• pp.185-188
• /
• 2021

Onychomycosis is the most common disease of the nail, with a worldwide prevalence of 5.5%. It causes local pain, paresthesia, and cosmetic problems and decreases the patients' quality of life. Conventional treatments include the administration of topical and systemic agents. However, factors such as subungual hyperkeratosis and biofilm formation may affect the efficacy of these treatments. Moreover, side effects associated with systemic agents are a major concern for patients. Therefore, various novel treatments are being developed; among them, photodynamic therapy (PDT) and Nd:YAG laser are promising, and several studies have demonstrated the efficacy and safety of PDT and laser therapy. Here, we report the efficacy and tolerability of PDT combined with 1064-nm Nd:YAG laser therapy and topical efinaconazole for the treatment of three patients with refractory onychomycosis.

• Current Optics and Photonics
• /
• 제6권4호
• /
• pp.400-406
• /
• 2022

We numerically demonstrate that the inherent spiking behavior in the quasi-continuous-wave (QCW) operation of an Nd:YAG laser can be suppressed by adopting bias pumping. After spiking suppression, the output QCW pulses from a bias-pumped Nd:YAG laser are very stable, and they can maintain nearly the same temporal shape as that of pump pulse under different pump repetition rates and peak powers. Our study implies that bias pumping is an alternative method of spiking suppression in solid-state lasers, and the application areas of an Nd:YAG laser may be extended by bias pumping.

• 한국정밀공학회지
• /
• 제14권1호
• /
• pp.142-149
• /
• 1997

Ceramic-coated anilox roll for printing is resistant to corrosion and wear, and hence has enhanced life and quality. Laser engraving is used typically for machining holes to store ink in this roll. Since engraved hole size and shape are directly related to laser processing parameters, it is necessary to know the rela- tionships among these parameters. In this study, the parameters for engraving of ;oasma sprayed ceramic coatings with Nd:YAG laser were studied. Relationships between hole shape and processing parameters were analyzed. Cr$_{2}$O$_{3}$ceramic was found to be most suitable for Nd:YAG laser engraving. It was found that hole depth can be increased by using higher energy pulses. Effect of using different assistant gases was small to the final results. For better results, it was suggested to use a very stable laser with shorter pulses and higher pulse energy.