• Corrosion Science and Technology
• /
• v.8 no.2
• /
• pp.89-92
• /
• 2009

Pure Ti as well as Ti-6Al-4V alloy exhibit excellent properties for dental implant applications. However, for a better biocompatibility it seems important to avoid in the composition the presence of V due to the toxic effects of V ion release. Thus Al and V free and composed of non-toxic element such as Nb, Zr alloys as biomaterials have been developed. Especially, Zr contains to same family in periodic table as Ti. The addition of Zr to Ti alloy has an excellent mechanical properties, good corrosion resistance, and biocompatibility. In this study, the electrochemical characteristics of Ti-Zr alloys for biomaterials have been investigated using by electrochemical methods. Methods: Ti-Zr(10, 20, 30 and 40 wt%) alloys were prepared by arc melting and homogenized for 24 hr at $1000^{\circ}C$ in argon atmosphere. Phase constitutions and microstructure of the specimens were characterized by XRD, OM and SEM. The corrosion properties of the specimens were examined through potentiodynamic test (potential range of -1500 ~ 2000 mV), potentiostatic test (const. potential of 300 mV) in artificial saliva solution by potentiostat (EG&G Co, PARSTAT 2273. USA).

• Proceedings of the KIEE Conference
• /
• 2001.11a
• /
• pp.134-136
• /
• 2001

In this paper, we investigated the electrical and piezoelectric characteristics of $Pb(Sb,Nb)O_3-Pb(Zr,Ti)O_3$ for piezoelectric transformer and actuator etc. Effect of $WO_3$ addition($0\;wt%{\sim}0.6\;wt%$) on the PSN-PZT ceramic was investigated. Anisotropic properties of electromechanical coupling factor and piezoelectric properties were proved to be varied with amount of $WO_3$ impurity and sintering temperature($1100{\sim}1300^{\circ}C$). The electromechanical coupling factor $k_p$ of 0.41 and the mechanical quality factor am of 1243 were obtained from the specimen with 0.6 wt% $WO_3$ addition sintered at $1100^{\circ}C$ Experimental results indicated that the PZT-PSN ceramics with $WO_3$ impurity can be effectively used for piezoelectric transformer and actuator. etc.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.8 no.1
• /
• pp.43-49
• /
• 2004

Ten promising polyvoltine mulberry silkworm strains(SDMGl, SDMG2, SDMG3, SDMG4, SDMWl, SDMW2, RMWl, RMW2, RMW3 and RMW4) that are superior in quantitative and qualitative traits have been synthesized in the polyvoltine breeding laboratory of Andhra Pradesh State Sericulture Research ＆ Development Institute, Hindupur through systematic hybridization and appropriate selection methods. After the genotypes were found homozygous for the desired traits, they have been crossed with 3 bivoltine testers $(APS8, APS4 and {NB_2}{D_4})$ and thirty new hybrid combinations were developed for the assessment of their hybrid performance. Phenotypic expressions of economically important quantitative and qualitative traits of fist filial generation were measured and subjected for statistical analysis. Evaluation Index and Subordinate Function methods were employed for the assessment of hybrid performance since they are widely used in silkworm hybrid evaluation. Total of seven poly${\times}$bivoltine combinations, which ranked high in both the methods, were selected as potential combinations for further field test. These combinations also ranked significantly higher than the control hybrid (APMl${\times}$APS8).

• Transactions of Materials Processing
• /
• v.17 no.7
• /
• pp.523-527
• /
• 2008

In this study, mechanical properties of Alloy 718 welded after forgings for jet propulsion component was investigated. Hot-forged and machined work-pieces($230mm\times70mm\times15mm$) which have different grain sizes are welded by electron beam welding technique. After welding, the components were solution heat-treated and aged. Samples were sectioned to analyze the microstructural evolution and formation of micro-crack. It was found that HAZ grain boundary liquation crack generally initiates in the coarse grains rather than the fine grains. Needle-like phases with high Nb contents were found at the outer part near the base metal. Vickers hardness and tensile tests were carried out at room temperature and at $649^{\circ}C$. The tensile properties of electron beam welding specimens exhibited around 100MPa and 10% decrease in strength and elongation, respectively.

• Journal of the Korean Ceramic Society
• /
• v.41 no.12 s.271
• /
• pp.884-888
• /
• 2004

Effects of NiO were studied in aspects of dielectric properties and microstructure of $0.96(0.91Pb(Mg_{1/3}Nb_{2/3})O_3-0.09PbTiO_3)­0.04BaTiO_3$ (PMN-PT-BT, PBT). The PBT was prepared by a conventional mixed oxide method using $(MgCO_3)_4{\cdot}Mg(OH)_2$ instead of MgO through Lewis acid-base interaction. NiO was added in the range of 0.5 to $3.0\;wt\%$ as thermally decomposable $2NiCO_3{\cdot}3Ni(OH)_2$ and it seemed to enhance densification to a large extent below $1000^{\circ}C$. But all the systems gave rise to ceramics with almost same relative sintered density of 96% by sintering at $1000^{\circ}C$ for 2 h. But it turned out that the addition of NiO was detrimental to dielectric constant but beneficial to the loss of dielectric constant.

• Korean Journal of Materials Research
• /
• v.14 no.7
• /
• pp.451-456
• /
• 2004

Thermal creep properties of the zirconium tube which was developed for high burnup application were evaluated. The creep test of cladding tubes after various final heat treatment was carried out by the internal pressurization method in the temperature range from $350^{\circ}C to 400^{\circ}C$ and from 100 to 150 MPa in the hoop stress. Creep tests were lasted up to 900days, which showed the steady-state secondary creep rate. The creep resistance of zirconium claddings was higher than that of Zircaloy-4. Factors that affect creep resistance, such as final annealing temperature, applied stress and alloying element were discussed. Tin as an alloying element was more effective than niobium due to solute hardening effect of tin. In case of advanced claddings, the optimization of final heat treatment temperature as well as alloying element causes a great influence on the improvement of creep resistance.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.95-96
• /
• 2011

본 논문은 표면탄성파(Surface Acoustic Wave)의 특성을 이용하여 반사되어 돌아오는 피크 신호를 통해 개체를 식별하며 온도 변화에 따른 위상의 변화를 갖는 ID 태그 및 온도 센서의 제작공정과 네트워크 분석기를 이용한 측정에 대해 소개한다. 표면탄성파 마이크로센서는 IDT(interdigital trancducer)와 ID 번호를 갖는 리플렉터, 온도 변화에 따른 위상 변위를 관찰하기 위한 리플렉터로 구성된다. 제작된 두 개의 소자는 49(0110001), 113(1110001)의 ID 번호를 가지고 있으며, 1 us에서 기준신호를 관찰할 수 있도록 한 개의 리플렉터를 추가적으로 포함한다. 또한 온도 변화에 따른 전파 속도의 변화로 인해 발생 하는 위상 변화를 관찰하기 위한 리플렉터를 포함한다. $41^{\circ}$YX $LiNbO_3$ 압전기판, AZ1512 감광제, 알루미늄을 이용하여 제작 되었고 네트워크 분석기를 통해 출력된 신호로 ID 번호를 식별하고 $30^{\circ}C$에서 $120^{\circ}C$까지의 온도 변화에 따른 위상 변화를 측정하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.4
• /
• pp.293-302
• /
• 1998

This study was performed to investigate the behavior of chlorobenzenes (CIBZS) and chlorophenols (CIPhs) in a thermally treated MSWI fly ash. The experiment was carried out in a fixed bed reactor at the temperature range of 300~$600^{\circ}C$. Reaction time range was between 30 and 120 minutes, and NB and 02 gases were used as carrier gas. The decomposition rate of CIBZS was more affected by reaction time than by the reaction temperature. The decomposition rate of CIPhs was affected by both parameters. Decomposition rate of CIBZS and CIPhs reached 80.4% and 96.6% at $600^{\circ}C$, 120 min, respectively. Considering the effect of O2 content, decomposition rate of CIBZS and CIPhs was the highest at 10% of O2 content. Declorination and decomposition reactions Pere investigated by analyzing homologue distribution. Higher chlorinated CIBZS and CIPhs homologue decreased but lower chlorinated compounds increased with the increase of temperature. Effect of O2 on the homologue distribution of these compounds was not clear in the range of our experiment conditions.

• Journal of Powder Materials
• /
• v.16 no.2
• /
• pp.104-109
• /
• 2009

Niobium powder was made from potassium heptafluoroniobite ($K_2NbF_7$) as the raw material using sodium (Na) as a reducing agent based on the hunter process. The apparatus for the experiment was designed and built specifically for the present study. The niobium particle size greatly increased as the reduction temperature increased from $710^{\circ}C$ to $800^{\circ}C$. The particle size was fairly uniform, varying from $0.09{\mu}m$ to $0.4{\mu}m$ depending on the reduction temperatures. The niobium powder morphology and particle size are very sensitive to a reaction temperature in the metallothermic reduction process. The yield of niobium powder increased from 55% to 80% with a increasing a reaction temperature.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1999.06a
• /
• pp.253-269
• /
• 1999

The development of telecommunication and information technology requires to develop new piezoelectric materials with small size, low impedance, wide pass band width and high thermal stability of frequency. Langasite (La3Ga5SiO14) single crystal has been researched substitute of quartz and LiNbO3 for the applications of SAW filter, BAW filter and resonator. Its single crystal growth has been carried out by Czochralski Method. So, in order to get single crystal with higher quality, in this study, lnagasite (La3Ga5SiO14) single crystal was grown by using Floating Zone (FZ) method and characterized. For the growth of langasite single crystals, the langasite powder was synthesized at 135$0^{\circ}C$ for 5hrs and the feed rod was sintered at 135$0^{\circ}C$ for 5hrs. The growing rate was 1.5mm/h and the rotation speed was 15 rpm for an upper rotation and 13 rpm for a lower rotation. In order to prevent the evaporation of gallium oxide, Ar and O2 gas mixture was flowed. The growth direction was analyzed by Laue back-scattered analysis. The composition of grown crystal was analyzed suing XRD and WDS. The electrical properties of grown crystal at various frequencies and temperature were discussed.