• 한국세라믹학회지
• /
• 제22권3호
• /
• pp.19-24
• /
• 1985

The phtoelectrochemical porperties of $Nb_2O_5$, $Sb_2O_3$ and $V_2O_5$ doped and pure $SrTiO_3$ ceramic electodes were investigated. Shapes of I-V and I-λ characteristics of the pure $SrTiO_3$ ceramic electrode are similar to those of SrTiO3 single crystal electorde ; the anodic current strats at -0.9V (vs. Ag/AgCI) in 1 N-NaOH aqueous solution and the photoresponse appears at a wavelength of about 390nm and the quantum efficiency is about 3.5% at wavelength of 390nm under 0.5V vs. Ag/AgCl. Photocurrents of $Nb_2O_5$, $Sb_2O_3$ and $V_2O_5$ doped electrodes and $V_2O_5$ doped ceramic electrode appears at wavelength of 390nm and 500nm respectively.

• 한국결정성장학회지
• /
• 제30권5호
• /
• pp.194-199
• /
• 2020

2차원 층상결정구조를 갖는 금속산화물 나노시트의 조성을 제어함으로써 재료 물성 및 응용의 확장이 가능하다. 본 연구에서 니오비움(Nb)이 도핑 된 타이타늄산화물(TiO_y) 나노시트 합성에 성공함으로써 나노시트의 조성을 순수조성에서 도핑조성으로 확장할 수 있었다. 상세하게는 출발 물질인 층상 구조 금속산화물 합성 시 도핑 조성을 설계(K_0.8Ti_1.73-xNb_xLi_0.27O₄, x = 0, 0.03, 0.07)하고 고상 합성한 후 유기물처리를 통한 화학적 박리를 수행하였다. 이렇게 함으로써 니오비움이 도핑 된 타이타늄산화물 초박막 나노시트를 수득할 수 있었다. 나노시트의 크기는 x-y 방향에서 긴 길이 기준으로 2 ㎛ 이하였으며 두께(z 방향)는 약 1 nm였다. 니오비움의 도핑 여부는 XRD 및 SEM-EDS 분석을 통해 확인할 수 있었다.

• 대한환경공학회지
• /
• 제33권12호
• /
• pp.907-912
• /
• 2011

물의 광분해에 의한 수소생산을 위하여 이산화티타늄($TiO_2$)과 산화니오븀($Nb_2O_5$)을 이용하여 가시광선 감응 광촉매 개발을 본 연구의 목적으로 하고 있다. 이를 위하여 요소를 이용한 질소 도핑한 $TiO_2$, $Nb_2O_5$, $HNb_3O_8$ ($TiO_2-N$, $Nb_2O_5-N$와 $HNb_3O_8-N$)을 제조하였다. 그 결과 질소 도핑이 광촉매의 띠간격 에너지를 감소시킴으로써 excitation파장이 자외선 영역에서 가시광선 영역으로 이동한 것을 reflectance 관찰을 통해 알 수 있었다. 특히 $TiO_2-N$의 경우 띠 간격 에너지가 3.3 eV ($TiO_2$)에서 2.72 eV로 가장 큰 감소를 보였다. 또한, 가시광선 영역에서 로다민 B 광분해 반응을 통하여 광촉매의 활성도를 평가하였을 때, 질소 도핑한 경우($Nb_2O_5-N$와 $HNb_3O_8-N$)는 모두 80% 이상의 분해 효율을 나타내었으며 특히 $TiO_2-N$이 약 99.8%의 높은 분해율을 보여주었다. 그러나 질소 도핑을 하지 않은 $TiO_2$와 $Nb_2O_5$의 경우, 약 10% 의 로다민 B가 분해된 것으로 관찰되었다. 또한 가시광선 영역에서 각 촉매의 광전류 생성을 비교해보았을 때, $HNb_3O_8-N$ ($63.7mA/cm^2$)이 가장 높은 전류 반응을 나타내었으며 물의 광분해에 의한 수소생산량을 비교해보면 $Nb_2O_5-N$이 $19.4{\mu}mol/h$의 가장 많은 양을 생산한 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.288-288
• /
• 2012

In this study, we investigated that the resistance switching characteristics of W-doped NbOx films with increasing W doping concentration. The W-doped NbOx based ReRAM devices with a TiN/W-doped NbOx/Pt/Ti/SiO2 were fabricated on Si substrates. The 50 nm thick W-doped NbOx films were deposited by reactive dc magnetron co-sputtering at $400^{\circ}C$ and oxygen partial pressure of 35%. Micro-structure of W-doped NbOx films and atomic concentration were investigated by XRD, TEM and XPS, respectively. The W-doped NbOx films showed set/reset resistance switching behavior at various W doping concentrations. The process voltage of set/reset is decreased and whereas the initial current level is increased with increasing W doping concentration in NbOx films. The change of resistance switching behavior depending on doping concentration was discussed in terms of concentration of metallic tungsten of oxygen of W-doped NbOx.

• 한국세라믹학회지
• /
• 제31권9호
• /
• pp.1012-1220
• /
• 1994

BaTiO3 ceramics doped with 0.1 to 4.0 mol% Nb2O5 were prepared by conventional solid stage sintering process, so as to investigate the effect of the amount of Nb2O5 on the dielectric properties and complex impedance patterns of barium titanates. From the measurement of capacitance, we found that the dielectric constant of BaTiO3 samples with 1 mol% or more Nb2O5 remained approximately constant around room temperature with values higher than 2500. In this paper, the effect of impurity content as well as temperature on complex impedance patterns was discussed in detail. In particular, the grain and grain boundary behavior of samples which showed PTCR characteristics was discussed in terms of measuring temperature.

• 한국세라믹학회지
• /
• 제34권8호
• /
• pp.791-796
• /
• 1997

The influence of Ti/Sr ratio on abnormal grain growth of Nb-doped SrTiO3 was investigated. For specimens which were isothermally sintered at temperatures above 144$0^{\circ}C$, the nucleation and growth rates of abnormal grain growth were decreased with increasing Ti/Sr ratio. But the onset time of abnormal grain growth was increased with increasing Ti/Sr ratio. The cross-section of abnormally grown grains was mostly hexagonal. When the specimens were quenched in air after they reached their setting temperatures at a heating rate of 3$^{\circ}C$/min, the onset temperature of abnormal grain growth was increased with increasing Ti/Sr ratio and the final grain size was independent of Ti/Sr ratio. The cross-section of abnormally grown grains was mostly rectangular.

• 한국세라믹학회지
• /
• 제35권8호
• /
• pp.864-870
• /
• 1998

The effect of {{{{ {{Nb }_{2 }O }_{5 } }} and CoO addition on the temperature dependence of the {{{{ {BaTiO }_{3 } }}-based ceramic capa-citor has been studied. X7R with moderate temperature dependence has been developed by means of pre-cisely controlled {{{{ {{Nb }_{2 }O }_{5 } }}/CoO ratio. Dielectric constant(K) and dissipation factor(DF) were 3500 and 1.5% respectively. As the content of {{{{ {{Nb }_{2 }O }_{5 } }} was increased the curie temperature(Tc) was shifted to lower tem-perature and the dielectric constant at Tc was decreased. The proper addition of CoO with {{{{ {{Nb }_{2 }O }_{5 } }} improved the temperature dependence of dielectric properties of the {{{{ {BaTiO }_{3 } }}-based ceramic capacitor.

• 한국세라믹학회지
• /
• 제30권8호
• /
• pp.671-677
• /
• 1993

Effects of PbTiO3 addition on dielectric properties and extent of PbO loss in Nd-doped Pb(Mg1/3Nb2/3)O3 system were investigated. As the proportion of dopping increased, the phase transition temperature shifted to low region, and the dielectric constant at room temperature decreased rapidly. But as the proportion of PbTiO3 increased, the phase transition temperature shifted to high retion, and the dielectric constant at room temperature increased. The substitution of Nd3+ for Pb2+ decreased the amount of PbO evaporation, therefore the sample sintered well in case of only 1 mole% adding excess PbO.

• 한국재료학회지
• /
• 제13권5호
• /
• pp.317-322
• /
• 2003

Bismuth layered structure ferroelectric thin films, $Bi_4$$Ti_3$$O_{12}$ / (BTO) and Nb-doped BTO (BTN) were prepared on the Pt(111)/Ti/$SiO_2$/Si(100) substrates by a sol-gel route. We investigated the Nb-doping effect on the grain orientation and ferroelectric properties. $Nb^{5＋}$ ion substitution for $Ti^{4＋}$ ion in perovskite layers of BTO decreased the degree of c-axis orientation and increased the remanent polarization (2Pr). The fatigue resistance of Nb-doped BTO thin film was shown to be superior to that of BTO, and the leakage current of Nb-doped BTO thin film was decreased about 1 order of magnitude compared with BTO. The improvement of ferroelectric properties with $Nb^{5＋}$ doping in BTO could be attributed to the changes in space charge densities and grain orientation in the thin film.

• 한국재료학회지
• /
• 제29권5호
• /
• pp.328-335
• /
• 2019

Nb-doped $TiO_2$(NTO) coated NiCrAl alloy foam for hydrogen production is prepared using ultrasonic spray pyrolysis deposition(USPD) method. To optimize the size and distribution of NTO particles based on good physical and chemical stability, we synthesize particles by adjusting the weight ratio of the Nb precursor solution(5 wt%, 10 wt% and 15 wt%). The morphological, chemical bonding, and structural properties of the NTO coated NiCrAl alloy foam are investigated by X-ray diffraction(XRD), X-ray photo-electron spectroscopy(XPS), and Field-Emission Scanning Electron Microscopy(FESEM). As a result, the samples of controlled Nb weight ratio exhibit a common diffraction pattern at ${\sim}25.3^{\circ}$, corresponding to the(101) plane, and have chemical bonding(O-Nb=O) at 534 eV. The NTO particles with the optimum weight ratio of N (10 wt%) show a uniform distribution with a size of ~18.2-21.0 nm. In addition, they exhibit the highest corrosion resistance even in the electrochemical stability estimation. As a result, the introduction of NTO coated NiCrAl alloy foam by USPD improves the chemical stability of the NiCrAl alloy foam by protecting the direct electrochemical reaction between the foam and the electrolyte. Thus, the optimized NTO coating can be proposed for excellent protection of NiCrAl alloy foam for hydrocarbon-based steam methane reforming(SMR).