• Journal of the Korean Society for Heat Treatment
• /
• v.29 no.5
• /
• pp.209-215
• /
• 2016

In this study, the effect of Nb contents and processing parameters on dynamic recrystallization behaviour of 0.15C-0.2Si-0.5Mn low-carbon steels was investigated. Three kinds of steel specimens with different Nb contents were fabricated and then high-temperature compressive deformation test was conducted by varying reheating temperature (RT), deformation temperature (DT), and strain rate (SR). The Nb2 and Nb4 specimens containing Nb had smaller prior austenite grain size than the Nb0 specimens, presumably due to pinning effect by the formation of carbides and carbonitrides precipitates at austenite grain boundaries. The high-temperature compressive deformation test results showed that dynamic recrystallization behavior was suppressed in the specimens containing Nb as the strain rate increased and deformation temperature decreased because of pinning effect by precipitates, grain boundary dragging effects by solute atoms, although the compressive stress increased with increasing strain rate and decreasing deformation temperature.

• Journal of Ceramic Processing Research
• /
• v.13 no.spc2
• /
• pp.270-273
• /
• 2012

x mol% (x = 0 ~ 20) Na2CO3 excess Bi2.5Na3.5Nb5O18 (BNN) particles were synthesized using molten salt as a flux. The secondary phases were observed at stoichiometric ratio of BNN precursors and their intensity decreased with increasing Na contents. The results of SEM images showed that all particles existed in a platelet shape and the particle increased in size with higher increasing Na contents. Plate-like NaNbO3 particles were developed using BNN precursor obtained by a topochemical microcrystal conversion. XRD analysis of NaNbO3 particles showed that a single perovskite phase and the intensity of (h00) peaks increased with increasing Na contents in BNN precursor. SEM images showed that the size of plate-like NaNbO3 was significantly changed by controlling Na contents in BNN precursors.

• Korean Journal of Materials Research
• /
• v.11 no.4
• /
• pp.312-318
• /
• 2001

The mechanical and electrical properties of Cu-Nb filamentary nanocomposite fabricated by the bundling and drawing process were examined. The strength increased gradually with increasing Nb content while the ductility was insensitive to Nb content. The ratio of yield stresses at 293K and 75K are found to be 치ose to that of Young's moduli in various Cu-Nb nanocomposites, suggesting that athermal obstacles primarily control the strength. The fracture morphologies show ductile fractures irrespective of Nb contents. Secondary cracking along the interfaces between subelemental wires was occasionally observed and the frequency of secondary cracking increased with increasing Nb content. The conductivity and the resistivity ratio decreased with increasing Nb content. The decrease of the conductivity and the resistivity ratio(${\rho}_{293k}$/$\{rho}_{75k}$) can be explained by the increasing contribution of interface scattering.

• Journal of the Korean Ceramic Society
• /
• v.27 no.6
• /
• pp.713-720
• /
• 1990

The effects of substituting Zn+2 for Ni+2 ion on dielectric and piezoelectric prooperties of Pb(Zn1/3Nb2/3)O3-Pb(Ni1/3Nb2/3)O3-PZT ceramics were investigated. With increasing Zn2+ contents the tetragonality was appreciably enhanced and the grain size decreased. Both Curie temperature and thermal stability were increased with increase in Zn2+ contents since the Zn+2 partial substition for Ni+2 could form solid solution in almost range of the composition investigated. Piezoelectric prooperties showed the maximum($\varepsilon$ T/$\varepsilon$0=5014, kp=0.56, d31=250$\times$10-12m/V) in 4.5Pb(Zn1//3Nb2/3)O3-40.5Pb(Ni1/3Nb2/3)O3-55PZT composition sintered at 125$0^{\circ}C$ and then decreased again due to the phase boundary movement for tetragonal phase of the solid solution of Zn2+ amount.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.3
• /
• pp.274-279
• /
• 2016

Stainless steel is widely used in various industries due to its excellent anti-corrosion characteristics. However, if the stainless steel is exposed to high speed fluid flow and chloride ion in the marine environment, corrosion and cavitation damage occurred on the surface easily. Therefore, to prevent these problems, stabilzed stainless steel is applied to offshore and shipbuilding industries. In this study, stabilized stainless steel specimen was made by 19%Cr-9%Ni with different Nb contents (0.29%, 0.46% and 0.71%). And then, their cavitation characteristics were investigated. As a result, the characteristics of cavitation resistance of stainless steel could be improved by increasing Nb contents.

• Economic and Environmental Geology
• /
• v.46 no.5
• /
• pp.455-468
• /
• 2013

We performed reconnaissance survey on Dashinchilen Nb-Ta REE area and Sant Cu area which are located in southeastern part of Khangai rare metals mineralized belt. In Dashinchilen area, Nb and Ta have been found in pegmatitic granite that is largely distributed in the survey area and muscovite in pegmatite which is an intrusion in paleozoic sedimentary rocks which are mostly composed of sandstone. While grades of Nb and Ta are not high, an outcrop that has high Th and U contents (542 ppm of Th and 56.9 ppm of U) has been found. Average and maximum REE contents in the survey area is three times and seven times, respectively, larger than average REE contents in the crust of the Earth. In Sant area, copper oxides such as malachite has been found in quartzite in paleozoic sedimentary rocks. A sedimentary rock formation that has high grade of Mn (12.4-34.6 %) has been found in the survey area. This sedimentary rock formation is the same formation with that of Ugii Nuur Fe-Mn mineralization which is located about 200 km northwest of the survey area. Average and maximum REE contents in the survey area is two and half times and seven times, respectively, larger than average REE contents in the crust of the Earth. According to the factor analysis for the data of the geochemical analysis, Nb and Ta in Dashinchilen area are highly correlated with muscovite and Cu in Sant area is highly correlated with Mo, Sn, and Bi. Furthermore, the factor analysis results show that Fe in Sant area was deposited with rare earth elements.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.333-333
• /
• 2012

In this study, we investigated morphology of nanotube and micropore on the Ti-25Nb-xHf alloys with Hf contents after anodization. Ti-25Nb-xHf ternary alloys contained from (0~15) wt.% Hf contents were manufactured by vacuum arc-melting furnace. The obtained ingots were homogenized in an argon atmosphere at $1000^{\circ}C$ for 12h and then water quenching. The specimens were cut from ingots to 3mm thickness and first ground and polished using SiC paper (grades from 100 to 2000). 2steps anodization treatments on Ti-25Nb-xHf alloys were carried out at room temperature for experiments. Micro-pore formation was performed in Ca+P mixed solution at 265V for 3min. After that, nanotube formation was in 1M $H_3PO_4$ electrolytes containing 0.8wt.% NaF solutionat 10V for 120min. Morphologies of micropore and nanotube depended on the Hf content in Ti-25Nb-xZr ternary system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.38 no.9
• /
• pp.1087-1093
• /
• 2014

Stainless steels stabilized with Ti or Nb are largely used in offshore and shipbuilding industries due to its excellent corrosion resistance. In this study, carbide stabilizers, Ti and Nb, were added to stainless steel 304 specimens with different concentrations(Ti: 0.26%, 0.71%, Nb: 0.29%, 0.46%, 0.71%), and their mechanical and electrochemical characteristics were evaluated. Micro-Vickers hardness testing was employed to characterize the mechanical characteristics with alloying elements. Electrochemical evaluation techniques including Tafel analysis, cyclic polarization experiment, galvanostatic experiment were utilized to compare the corrosion characteristics of the specimens. The result of hardness tests revealed that Nb containing specimens showed increasing hardness with increasing alloying contents while adding Ti had little effect on increase in hardness. In the case of electrochemical measurements, the electrochemical characteristics of the specimens were enhanced with increasing Nb contents while they were deteriorated with increasing Ti contents. As a result, different stabilizers and their contents may produce significant differences in electrochemical characteristics, and there such effect must be taken account of in development of stainless steels for marine environment.

• Journal of Technologic Dentistry
• /
• v.28 no.1
• /
• pp.61-66
• /
• 2006

Titanium alloys have been used for dental materials due to it's very good biocompatibility. Ti-6Al-4V alloy instead of pure titanium is being widely used as biomaterials has some characteristics such as high fatigue strength, tensile strength and corrosion resistance. But it has been reported recently that the vanadium element expresses cytotoxicity and carcinogenicity and the aluminium element is related with dementia of Alzheimer type and neurotoxicity. The Ti-Nb alloys has designed and examined corrosion resistance. Ti-3wt.%Nb($\alpha$type), Ti-20wt.%Nb(${\alpha}+{\beta}$type) and Ti-40wt.%Nb($\beta$type) alloys were melted by vacuum arc furnace. The corrosion resistance of Ti alloys was evaluated by potentiodynamic polarization test in the solution of 0.9% NaCl and 5% HCl. The results can be summarized as follows: 1) For the corrosion test in the solution of 0.9% NaCl and 5% HCl, the corrosion behaviour of Ti-Nb alloys was similar to ASTM grade 2 CP Ti. 2) The corrosion resistance of Ti-20Nb alloy was better than that of CP-Ti, Ti-3Nb, Ti-40Nb alloy in 0.9% NaCl and 5% HCl, solutions.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.05a
• /
• pp.143-143
• /
• 2009

본 연구에서는 Ti 합금에 Nb과 Zr을 첨가하여 Ti-29Nb-xZr(x : 3, 5, 7, 10, 15 wt %) 3원계 합금을 제조하고 Zr의 함량과 전압 그리고 용액의 농도를 다르게 하여 양극산화 시킨 후 합금의 표면을 관찰하고 특성을 조사하였다.