• 한국전기전자재료학회논문지
• /
• 제27권1호
• /
• pp.14-17
• /
• 2014

In this study, lead-free Piezoelectric $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ ceramics were fabricated using mixed oxide method and the effects of various sintering temperature on the structural and electrical properties were investigated. For the $(Na_{0.47}K_{0.47}Sr_{0.03}Ca_{0.03})(Nb_{0.94}Ti_{0.06})O_3$-0.1 $MnO_2$ (NKN-SCT-$MnO_2$) ceramics sintered at temperatures of $1,025{\sim}1,100^{\circ}C$. The results indicated that all specimens were perovskite single phase formation without any second phase. It has been shown that relative density is increased to increasing sintering temperature. When the sintered temperature at $1,075^{\circ}C$, highest sintered density and maximum value of $4.45g/cm^3$. Average grain size is increased to increasing sintering temperature. The electromechanical coupling factor, dielectric constant, dielectric loss, d33 and curie temperature at the sintering temperature $1,075^{\circ}C$ of NKN-SCT-$MnO_2$ specimens were 0.22, 511, 0.033, 103 and $380^{\circ}C$, respectively.

• 디지털융복합연구
• /
• 제18권10호
• /
• pp.225-232
• /
• 2020

5G 셀룰러 네트워크 하의 언더레이 기법은 매우 전망 있는 자원공유 기법으로써 이 기법은 5G의 서비스 성능향상과 셀룰러 링크와 D2D(Device to Device) 링크 간의 통신 부하를 줄일 수 있는 효과적인 기법이다. 본 논문에서는 gNB(gNodeB)상에서 5G기반의 멀티 클래스 서비스를 수행하는데 있어서 발생하는 자원간섭을 최소화하고, 분석된 간섭의 제어조건에 따라 5G 통신 서비스를 극대화하기 위한 협력적 우선순위 기반의 자원할당 스케줄링 CPRAS(Cooperative Priority-based Resource Allocation Scheduling)기법을 제안한다. 제안된 CPRAS기법은 각 디바이스들에 대한 통신 자원을 최적화하며, 5G의 통신에 필요한 서비스 요청과 네트워크의 현재 상태에 따라 자원할당을 최적화한다. 또한 제안된 기법은 gNB하의 셀룰러 링크와 D2D링크 간의 자원간섭을 최소화함으로써 기가급의 서비스를 보장하는 기능을 제공한다. 시뮬레이션 결과 제안된 기법이 Pure cellular기법과 Force cellular기법에 비해서 더 나은 시스템 성능을 보였으며, 특히 우선순위가 높고 UE(User Equipment)들 간의 협력이 높을수록 자원간섭 제어가 효과적임을 보인다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 하계학술대회 논문집 Vol.9
• /
• pp.52-52
• /
• 2008

The positive temperature coefficient of resistivity (PTCR) effect in (1-x)$BaTiO_3$ - $x(Bi_{0.5}K_{0.5})TiO_3$ doped with $Nb_2O_5$ was investigated. $(Bi_{1/2}K_{1/2})TiO_3$ (BKT) is more environment-friendly than $PbTiO_3$ in order to use in PTC thermistors. The incorporation of 1 mol% BKT to $BaTiO_3$ increased the Curie temperature (Tc) to $148^{\circ}C$. Doping of $Nb_2O_5$ to $Ba_{0.99}(Bi_{0.5}K_{0.5})_{0.01}TiO_3$ (BaBKT) ceramic has enhanced its PTCR effects. For the sample containing 0.025 mol% $Nb_2O_5$, it showed good PTCR properties; low resistivity at room temperature (${\rho}_r$) of 30 $\Omega{\cdot}cm$, a high PTCR intensity of approximately $3.3\times10^3$, implying the ratio of maximum resistivity to minimum resistivity (${\rho}_{max}/{\rho}_{min}$) in the measured temperature range, and a large resistivity temperature factor (a) of 13.7%/$^{\circ}C$ along with a high Curie temperature (Tc) of $167^{\circ}C$. In addition, the cooling rate of the samples during the sintering process had an influence on their PTCR behavior. All the samples showed the best ${\rho}_{max}/{\rho}_{min}$ ratio when they have cooled down at a rate of $600^{\circ}C$/min.

• 한국정보전자통신기술학회논문지
• /
• 제13권5호
• /
• pp.370-376
• /
• 2020

본 연구에서는 NB-IoT 환경에서 한 셀에 H2H 단말과 대규모의 M2M 단말이 공존하는 경우, 단말들을 그룹화하여 그룹 연결과 전달을 하는 그룹 기반 랜덤 액세스 방법을 고려한다. H2H 단말들은 개별 랜덤 액세스를 하지만 M2M 단말들은 NPRACH 전송주기에 따라 그룹화 하고, 각 그룹의 리더가 그룹 기반 랜덤 액세스를 수행한다. 비 결합 할당 방식(DA)으로 프리앰블을 할당하는데, H2H 단말의 처리량을 최대로 하는 프리앰블을 우선적으로 H2H 단말에 할당해 주고, 나머지를 M2M 단말에 할당해 주는 가변 프리앰블 할당 알고리즘을 제시하였다. H2H와 M2M 단말들의 접속 분포는 각각 포아송 분포와 베타 분포로 설정하여, 처리량, 충돌확률 그리고 자원 사용률로 분석한다. 랜덤 액세스 전송 슬롯이 반복됨에 따라 제안된 프리앰블 할당 알고리즘은 M2M 그룹 수가 150인 경우, 충돌확률을 0.93에서 0.83 그리고 0.79 로 감소함을 알 수 있었으며, 자원의 사용률이 33.7[%], 44.9[%], 48.6[%]로 증가의 폭이 줄어드는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1991년도 추계학술대회 논문집
• /
• pp.20-23
• /
• 1991

In this study, 0.05Pb(Mn$\_$1/3/Nb$\_$2/3/)O$_3$+ 0.95Pb(Zr/Ti)O$_3$+x[wt%]Cr$_2$O$_3$piezoelectric ceramics were fabricated by Hot-press method, and its structural, dielectrical, piezoelectrical properties, temperature stability and aging characteristics were investigated. Among the MPB and tetragonal compositions, the specimens with 0.2, 0.3 and 0.4 [wt%] Cr$_2$O$_3$ additive amount had the poisson ratio more than 1/3. At tetragonal phase, the aging was small, and the temperature stability was improved by Cr addition. The specimen most suitable to the HF device substrate was the one with the composition of 47/53 (Zr/Ti) an 0.4 [wt%] Cr$_2$O$_3$addition.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2004년도 동계학술연구발표회 논문개요집
• /
• pp.107-108
• /
• 2004

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.17-21
• /
• 1995

Tw types of Pb(Mn$\sub$1/3/Nb$\sub$2/3/)O$_3$+PZT Ceramics had been fabricated by hot-pressing method. One had cause grain and the other had fine grain doe to Cr$_2$O$_3$ addition. These specimen were poled by applying the DC electric field in various steps. The effects of thermal aging on their piezoelectric characteristics and temperature stability of the frequency were investigated.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.64-64
• /
• 2005

• Journal of Welding and Joining
• /
• 제35권1호
• /
• pp.9-15
• /
• 2017

IMicrostructure evolution and tensile property in the weld heat-affected zone (HAZ) of austenitic Fe-30Mn-9Al-0.9C lightweight steels were investigated. Five alloys with different V and Nb content were prepared by vacuum induction melting and hot rolling process. The HAZ samples were simulated by a Gleeble simulator with welding condition of 300kJ/cm heat input and HAZ peak temperatures of $1150^{\circ}C$ and $1250^{\circ}C$. Microstructures of base steels and HAZ samples were observed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM), and their mechanical properties were evaluated by tensile tests. The addition of V and Nb formed fine V and/or Nb-rich carbides, and these carbides increased tensile and yield strength of base steels by grain refinement and precipitation hardening. During thermal cycle for HAZ simulation, the grain growth occurred and the ordered carbide (${\kappa}-carbide$) formed in the HAZs. The yield strength of HAZ samples (HAZ 1) simulated in $1150^{\circ}C$ peak temperature was higher as compared to the base steel due to the formation of ${\kappa}-carbide$, while the yield strength of the HAZ samples (HAZ 2) simulated in $1250^{\circ}C$ decreased as compared to HAZ 1 due to the excessive grain growth.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.111-118
• /
• 2002

A new lithium niobate optical modulator with a polymer buffer layer on Ni in-diffused optical waveguide is proposed for the fist time, successfully fabricated and examined at a wavelength of 1.3 mm. By determining the diffusion parameters of Ni in-diffused waveguide to achieve more desirable mode size which is well matched to the mode in the fiber, the detailed results on the achievement of high optical throughput are reported. In addition, the usefulness of polymer buffer layer which can be applicable to a buffer layer in Ni in-diffused waveguide devices is demonstrated. Several sets of channel waveguides fabricated on Z-cut lithium niobate by Ni in-diffusion were obtained and on which coplanar traveling-wave type electrodes with a polymer-employed buffer layer were developed by a conventional fabrication method for characterizing of electro-optical performances of the proposed device. The experimental results show that the measured half-wave voltage is of ~10 V and the total measured fiber-to-fiber insertion loss is of ~6.4 dB for a 40 mm long at a wavelength of =1.3 mm, respectively. From the experimental results, it is confirmed that the polymer-employed buffer layer in LiNbO3 optical modulator can be a substitute material instead of silicon oxide layer which is usually processed at a high temperature of over $300^{\circ}C$. Moreover, the fabrication tolerances by using polymer materials in LiNbO3 optical modulators are much less strict in comparison to the case of dielectric buffer layer.