• 마이크로전자및패키징학회지
• /
• 제30권4호
• /
• pp.79-85
• /
• 2023

(1-4x)Bi_1.5Zn_1.0Nb_1.5O₇-3xBi₂Zn_2/3Nb_4/3O₇-2xLiZnNbO₄(x=0.03-0.21) 조성의 새로운 저온 동시 소성 세라믹(LTCC) 유전체는 Bi_1.5Zn_1.0Nb_1.5O₇-xLi₂CO₃(x=0.03-0.21) 혼합물을 850℃~920℃에서 4 시간 반응성 액상소결(reactive liquid phase sintering)을 하여 제조하였다. 소결이 진행되는 동안 Li₂CO₃는 Bi_1.5Zn_1.0Nb_1.5O₇과 반응하여 Bi₂Zn_2/3Nb_4/3O₇과 LiZnNbO₄를 생성하였고 얻어진 소결체의 상대 소결밀도는 이론 밀도의 96% 이상이었다. 초기 Li₂CO₃ 함량(x)을 조절하여 최종 소결체내에 존재하는 Bi_1.5Zn_1.0Nb_1.5O₇, Bi₂Zn_2/3Nb_4/3O₇ 및 LiZnNbO₄ 상의 상대적인 함량을 제어함으로써 높은 유전율(ε_r), 낮은 유전손실(tan δ) 및 NP0 특성(TCε ≤ ±30 ppm/℃)의 유전율 온도계수(TCε)를 갖는 유전체를 개발할 수 있었다. Li₂CO₃의 첨가가 x=0.03 mol에서 x=0.15 mol로 증가함에 따라 얻어진 복합체 내의 Bi₂Zn_2/3Nb_4/3O₇와 LiZnNbO₄의 부피 분율은 증가하였고, Bi_1.5Zn_1.0Nb_1.5O₇의 부피 분율은 감소하였다. 그 결과 복합체의 유전율(ε_r)은 148.38에서 126.99로 유전손실(tan δ)은 5.29×10^-4에서 3.31×10^-4로 그리고 유전율 온도계수(TCε)는 -340.35 ppm/℃에서 299.67 ppm/℃로 변화되었다. NP0 특성을 갖는 유전체는 Li₂CO₃의 함량이 x=0.09일 때 얻을 수 있었고, 이 때의 유전율(ε_r)은 143.06, 유전손실(tan δ)값은 4.31×10^-4, 그리고 유전율 온도계수(TCε)값은 -9.98 ppm/℃ 이었다. Ag전극과의 화학적 호환성 실험은 개발된 복합 재료는 Ag 전극과 동시 소성 과정에서 전극과 반응이 없음을 보여주었다.

• 한국분말재료학회지
• /
• 제26권5호
• /
• pp.405-409
• /
• 2019

Piezoelectric ceramic specimens with the $Pb(Mg_{1/3}Nb_{2/3})_{0.65}Ti_{0.35}O_3$ (PMN-PT) composition are prepared by the solid state reaction method known as the "columbite precursor" method. Moreover, the effects of the $Li_2O-Bi_2O_3$ additive on the microstructure, crystal structure, and piezoelectric properties of sintered PMN-PT ceramic samples are investigated. The addition of $Li_2O-Bi_2O_3$ lowers the sintering temperature from $1,200^{\circ}C$ to $950^{\circ}C$. Moreover, with the addition of >5 wt.% additive, the crystal structure changes from tetragonal to rhombohedral. Notably, the sample with 3 wt.% additive exhibits excellent piezoelectric properties ($d_{33}=596pC/N$ and Kp = 57%) and a sintered density of $7.92g/cm^3$ after sintering at $950^{\circ}C$. In addition, the sample exhibits a curie temperature of $138.6^{\circ}C$ at 1 kHz. Finally, the compatibility of the sample with a Cu electrode is examined, because the energy-dispersive X-ray spectroscopy data indicate the absence of interdiffusion between Cu and the ceramic material.

• 한국재료학회지
• /
• 제29권3호
• /
• pp.150-154
• /
• 2019

This study investigates the effect of MnO2 and CuO as acceptor additives on the microstructure and piezoelectric properties of $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$, which has a rhombohedral-tetragonal phase boundary composition. $MnO_2$ and CuO-added $0.96(K_{0.5}Na_{0.5})_{0.95}Li_{0.05}Nb_{0.93}Sb_{0.07}O_3-0.04BaZrO_3$ ceramics sintered at a relatively low temperature of $1020^{\circ}C$ show a pure perovskite phase with no secondary phase. As the addition of $MnO_2$ and CuO increases, the sintered density and grain size of the resulting ceramics increases. Due to the difference in the amount of oxygen vacancies produced by B-site substitution, Cu ion doping is more effective for uniform grain growth than Mn ion doping. The formation of oxygen vacancies due to B-site substitution of Cu or Mn ions results in a hardening effect via ferroelectric domain pinning, leading to a reduction in the piezoelectric charge coefficient and improvement of the mechanical quality factor. For the same amount of additive, the addition of CuO is more advantageous for obtaining a high mechanical quality factor than the addition of $MnO_2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1165-1167
• /
• 1995

The Cu-Si alloy has been proposed as a new matrix materal for filamentary Nb-Ti wires in AC use. The Cu-Si alloy shows approprite mechanical and electrical properties, and is economically more favourable than the Cu-Ni alloy matrix used currently. Moreover, the addition of Si to Cu prevents the formation of intermetallic compounds around the filaments. After we investigated resistivity and hardness of Cu-Si alloy as matrix materal, investigated CuSi/NbTi interface reactions and superconductivities of superconducting wires that were made by various heat treatment.

• 한국세라믹학회지
• /
• 제30권7호
• /
• pp.543-548
• /
• 1993

Stability and formation of Pb(Mg1/3Nb2/3)O3 (PMN) phase synthesized in Li2SO4-Na2SO4 molten salts have been investigated. And powder characteristics of PMN have been studied with a variation of processing parameters such as temperature, time, amount of the salts, and excess PbO. More ratio of Li2SO4 to Na2SO4 influences the percentage of perovskite phase due to the difference of the eutectic point of the salts, but does not influence the powder characteristics. The shape of PMN particles shows faceted morphology with bimodal distribution consisting with large and submicron parts. Particle size of PMN increased greatly with increasing soaking time or amount of salts rather than temperature. The addition of excess PbO resulted in round PMN crystallites without submicron particles. These results are discussed by XRD, SEM and thermal analyses.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1994년도 추계학술대회 논문집
• /
• pp.13-16
• /
• 1994

In this paper, xPb(Zn$_{1/3}Nb_{2/3}$)$O_3$-yPbTiO$_3$-zPbZrO$_3$-(0.5wt%)MnO$_2$ ceramics were fabricated by the mixed oxide method sintered at $1250^{\circ}C$ for 2[hr] and then the deielectric, electromechanical coupling factor($K_{p}$ and mechanical coupling factor(Qm) properties were investigated. In 0.1PZN-0.45PT-0.45PZsample, dielectric properties and electromechanical coupling factor were 829 and 29%. In the case of 0.5PZN-0.45PT-0.50PZ sample, that was 101 according to mechanical quality facotr. molphotropic phase boundary(MPB) certained area which $PbTiO_3$addition quatity 40∼50[㏖%].

• 한국재료학회지
• /
• 제6권12호
• /
• pp.1186-1191
• /
• 1996

CuO의 첨가가 BiNbO4 세라믹스의 마이크로파 유전특성과 소결거동에 미치는 영향에 대하여 연구하였다. CuO의 첨가량이 증가함에 따라 액상의 생성에 의해 소결성이 증가하여 시편의 밀도는 증가하며 유전상수는 소결온도가 증가함에 따라 증가하는 경향을 보였다. Qxfo값은 CuO 첨가량이 0.065wt%이고 소결온도가 94$0^{\circ}C$일 때 최대값을 나타내며 그 이상 CuO 첨가량을 증가하였다. 소결온도 92$0^{\circ}C$-96$0^{\circ}C$, 소결시간 2시간일 때의 고주파 유전특성으로는 유전상수가 43.6, Qxfo값이 13,200 이상, $\tau$f =-14.36ppm/$^{\circ}C$을 얻었다.

• 연구논문집
• /
• 통권33호
• /
• pp.157-165
• /
• 2003

New titanium alloys with a low elastic modulus have been developed for biomedical applications to avoid the stress shielding effect of the artificial prosthesis. The newly developed alloys contained the transition elements like Zr, Hf, Nb, Ta which were non-cytotoxicity elements and $\beta$ stabilizers. In the present paper the elastic moduli of Ti-xM containing Zr, Hf, Nb, Ta were evaluated by measuring the acoustic velocity (PEG). The effectiveness of the alloying elements for lowering the elastic modulus was investigated. In addition, the dominant factors for the low modulus were discussed. Ta was the most effective in lowering the elastic modulus of the alloys. The effectiveness of Hf was not acceptable for decreasing the elastic modulus. The dominant factor was the lattice parameter for Zr, and the poisson's ratio for Nb, Ta, respectively.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1232-1233
• /
• 2006

To co-fire with commercial LTCC (Low Temperature Co-fired Ceramic) materials at $850^{\circ}C{\sim}880^{\circ}C$, different contents of $B_2O_3$ were added to the $Bi_2O_3-ZnO-Nb_2O_5$ (BZN) ceramics. According to the test results, the cubic phase of BZN was transformed into orthorhombic in all the test materials. $BiNbO_4$ phase was formed in test materials with $2{\sim}5wt%$ of $B_2O_3$ addition. The phase transformation of cubic BZN was controlled during the synthesis process with excess ZnO content. The Cubic and orthorhombic phases of BZN could coexist and be sintered densely at $850^{\circ}C/2hr$.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part 1
• /
• pp.552-553
• /
• 2006

The present study investigates the behavior of the sintering and hardness of stainless steel samples reinforced with NbC and TaC. Matrixes of pure stainless steel were compacted with addition of up to 3% wt NbC or TaC in a cylindrical die of steel $(\phi\;=\;5,0\;mm)$ at 700 MPa and sintered in an electrical resistance furnace under argon atmosphere. The sintered samples were characterized by density and hardness measurement, optical microscopy and scanning electron microscopy (SEM). The preliminary results show that the size and distribution of carbides influence in the sintering and hardness of the sintered samples.