• 대한화학회지
• /
• 제27권6호
• /
• pp.424-482
• /
• 1983

분석시료에 일정량의 표준물을 첨가한 후 희석제로 묽히는 방법을 이용하여 주석슬랙중의 $Ta_2O_5$,$Nb_2O_5$ 및 $SnO_2$를 X-선 분광 분석법으로 정량하였다. 희석제로는 $SiO_2$와 $Fe_2O_3$를 사용하였으며 첨가시료와 1:1의 비로 희석 시켰다. $Ta_2O_5$와 $SnO_2$ 의 분석결과는 $Fe_2O_3$보다 $SiO_2$로 희석시킨 것이 표준 검정곡선법에 의해 얻은 분석값과 더 잘 일치하고, $Nb_2O_5$는 이와 반대로 $SiO_2$보다 $Fe_2O_3$로 희석시킨 것이 더 잘 일치함을 보여주었다.

• 한국재료학회지
• /
• 제23권7호
• /
• pp.353-358
• /
• 2013

To improve coating ability and the life of the coating, Ti based composite materials with hydroxyapatite(HA) should be developed. The raw materials of Ti-26wt%, Nb-1wt%, and Si with 10wt% HA were mixed for 24 h by a mixing machine and milled for 1 h to 6 h by planetary mechanical ball milling. Ti-26%Nb-1%Si-(10%HA) composites, composed of nontoxic elements, were fabricated successfully by spark plasma sintering(SPS) at $1000^{\circ}C$ under 70MPa. The relative density of the sintered Ti-Nb-Si-HA composites using the 24 h mixed powder, and the 6 h milled powder, was 91% and 97 %, respectively. The effects of HA contents and milling time on microstructure and mechanical properties were investigated by SEM and hardness tester, respectively. The Vickers hardness of the composites increased with increasing milling time and higher HA content. The Young's modulus of the sintered Ti-26%Nb-1%Si-10%HA composite using the 6 h-milled powder was 55.6 GPa, as obtained by compression test. Corrosion resistance of the Ti-26wt%Nb-1wt%Si composite was increased by milling and by the addition of 10wt%HA. Wear resistance was improved with increasing milling time. Biocompatibility of the Ti-Nb-Si alloys was improved by the addition of HA.

• 한국자기학회지
• /
• 제7권5호
• /
• pp.250-257
• /
• 1997

Ar+N$_{2}$ 가스분위기에서 반응성 스퍼터링법으로 제조된 Fe-Nb-B-N 박막의 미세구조 및 자기적 특성을 조사하였다. 질소첨가한 적정조성의 Fe-Nb-B-N 박막은 우수한 고주파 연자기 특성을 보였는데, 그 특성은 다음과 같다. 포화자화(4 .pi. M$_{s}$ )는 16.5 kG, 보자력(H$_{c}$)은 0.13 Oe, 1 MHz에서의 실효투자율은 약 5,000의 값을 나타내었다. 특히 실효투자율은 10 MHz까지 겨의 변화가 없었으며, 100 MHz에서도 약 2,000의 값을 보여 매우 우수한 고주파 특성을 가진 재료로 판단된다. 한편, 이러한 우수한 특성을 지닌 Fe-Nb-B-N 박막의 미세구조를 TEM으로 관찰한 결과, 적정 열처리온도인 590 .deg. C에서 열처리한 Fe-Nb-B-N 박막은 약 5 ~ 10 nm의 .alpha. -Fe phase, Nb-nitride의 석출물과 Nb-B rich 비정질상 등으로 이루어져 있음을 알 수 있었다. 반면에 N이 첨가되지 않은 Fe-Nb-B 박막의 경우에는 약 10 nm정도의 .alpha. -Fe결정립과 Nb-B rich 비정질상의 두가지 상으로 이루어져 있다. 따라서 N을 첨가한 경우에 더욱 미세한 .alpha. -Fe 결정립을 얻을 수 있음이 확인되었다. 이는 N 첨가로 인한 결정립의 미세화 효과 와 Nb-nitride 형성으로 인한 결정립 성장의 억제효과에 의한 것으로 생각된다. 따라서 Fe-Nb-B-N 박막의 우수한 연자기 특성은 결정립 미세화에 기인하는 것으로 판단된다.

• Bulletin of the Korean Chemical Society
• /
• 제28권7호
• /
• pp.1167-1170
• /
• 2007

A simple and convenient method for the addition of TMSCN to carbonyl compounds is described. NbCl5 is found to possess a strong Lewis acid property to transform carbonyl compounds smoothly to the corresponding cyanosilylether in high yields (up to 99 %) in solvent- free conditions.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제17권2호
• /
• pp.245-251
• /
• 2017

Niobium doped zirconium oxide (Nb-Zr-O:NZO) thin films were fabricated on Si substrates by a sol-gel technique with an annealing temperatures of $500{\sim}1000^{\circ}C$ in air ($N_2:O_2=3:1$) for 20 minutes. It was found that the NZO film is based on tetragonal $ZrO_2$ polycrystalline structure with the Nb 5+ ion state and there is almost no diffusion of Nb or Zr to Si substrate. The relative dielectric constant for the NZO film with the Nb composition of 30 mol% and annealed at $800^{\circ}C$ was around 40. The root mean roughness was 1.02 nm. In addition, the leakage current of NZO films was as low as $10^{-6}A/cm^2$ at 4.4 V.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1999년도 PROCEEDINGS OF 99 INTERNATIONAL CONFERENCE OF THE KACG AND 6TH KOREA·JAPAN EMG SYMPOSIUM (ELECTRONIC MATERIALS GROWTH SYMPOSIUM), HANYANG UNIVERSITY, SEOUL, 06월 09일 JUNE 1999
• /
• pp.321-335
• /
• 1999

Erbium(Er) doped LiNbO3(Er:LiNbO3) single crystal gibers were grown free of cracks along the c-axis by micro-pulling down method. the Er3+ concentration was distributed homogeneously along the growth axis. The samples for optical characterization were cut from as-grown single crystal fibers and polished. When the 980 nm light was incident on the sample, upconversion phenomena were observed at the green range of wavelength 510~570 nm. In addition, the intensity of upconversion was remarkably increased by increasing the concentration of Er2O3 dopant in as-grown Er:LiNbO3 crystals.

• 대한치과기공학회지
• /
• 제24권1호
• /
• pp.95-104
• /
• 2002

For biomedical applications, Ti-X%Zr-Y%Nb-0.2%Pd(X:10$\sim$20, Y:2$\sim$8) alloys not containing harmful Al and V were newly designed, and the effect of alloy composition and heat treatment on the microstructure and mechanical properties was investigated. From the results, it was shown that the mechanical properties were enhanced with the addition of Zr or Nb. The effect of heat treating on room temperature strength was investigated by aging treatment after solution treatment. The mechanical properties of Ti-20%Zr-4%Nb-0.2%Pd alloy aged at 400$^{\circ}C$ for 10hrs was found to be superior to those of the pure Ti and Ti-6%Al-4%V ELI alloy.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
• /
• pp.204-205
• /
• 2005

[ $(Na_{0.5},\;K_{0.5})NbO_3$ ] ceramics were studied as lead free Piezoelectric materials. The addition of CdO were enhanced the sinterability of the NKN ceramics. The $(Na_{0.5},\;K_{0.47}Cd_{0.02})NbO_3$ ceramics show that electromachanical coupling factor($k_p$) is 0.34and mechanical quality factor($O_m$) is 120.

• 한국해양공학회지
• /
• 제11권3호
• /
• pp.48-55
• /
• 1997

The steel for automotive exhaust system needs a good corrosion resistance at the atmosphere of high temperature NaCl. Effect of the alloying elements Me, Ti, Nb on the NaCl induced hot corrosion behavior was investigated at the temperatures between 55$0^{\circ}C$ and 75$0^{\circ}C$ for 18Cr ferritic stainless steels. The weight loss by corrosion has increased linearly with corrosion cycle time, and the corrosion rate has accelerated at higher temperature. The alloying of Mo significantly improved corrosion resistance of the steel and the effect was more pronounced at higher temperature. The addition of alloying elements Ti, Nb have also shown improved corrosion resistance by formation of Ti(C,N) or Nb(C, N) precipitates.

• 한국표면공학회지
• /
• 제37권1호
• /
• pp.58-63
• /
• 2004

The oxidation behavior of Ti-Nb alloys was studied in dry atmosphere. After vacuum arc melting and hot rolling treatment, Ti-Nb alloys were oxidized at $450^{\circ}C$∼$750^{\circ}C$. The oxidation behaviors between matrix and oxide scale were analyzed by SEM, XPS and XRD. Ti-Nb alloys had higher oxidation resistance than pure Ti at $750^{\circ}C$. XPS analysis of oxide film revealed that $TiO_2$ oxide was formed on the top of surface. The weight gains during the oxidation increase rapidly at temperature above $600^{\circ}C$ which obey the parabolic law.