• 한국항행학회논문지
• /
• 제8권1호
• /
• pp.19-26
• /
• 2004

본 논문은 군에서 운용중인 대공포 사격 훈련용으로 개발한 무인 표적기용 자동비행시스템 개발에 관한 논문이다. 조종사에 의해 수동으로 운용중인 표적기를 자동화함으로써 조종사 측면에서는 비행업무를 경감시키고, 군 측면에서는 사격훈련 예산절감이라는 장점을 가지게 된다. 현재까지 개발된 대부분의 UAV(Unmanned Aerial Vehicle)는 항공기 자세를 측정하기 위해 AHRS(Attitude & Heading Reference System)와 IMU(Inertial Measurement Unit)등의 고가의 센서를 장착하고 있지만 이를 장착하고 무인기를 사격훈련용으로 사용하기에는 예산절감이라는 목적에 적합하지 않다. 이에 본 논문은 저가의 센서를 장착하고 자동비행이 가능하도록 저가형 자동비행시스템을 개발하였으며, 자동비행 컴퓨터를 포함한 센서, 전원모듈, 스위칭 모듈, 모니터링 모듈, RC 수신기를 하나의 모듈로 단일화하여 통합형 자동비행시스템을 개발하였다. 또한 비행시험을 통하여 자동비행시스템 성능을 입증하였다.

• 제어로봇시스템학회논문지
• /
• 제5권7호
• /
• pp.827-835
• /
• 1999

In this paper, a dead reckoning navigation system for differential drive mobile robots is presented. The navigation system consists of two incremental encoders and a gyroscope. We have built a third order polynomial function for compensating the nonlinear scale factor errors of the gyroscope. We utilize an indirect Kalman filter that feeds back estimated errors to the main navigation system. Also, the observability of the filter is analyzed in order to systematically evaluate the filter's performance. Experimental results show that the proposed navigation system provides a reliable position and heading angle by mutually compensating the encoder and the gyroscope errors. The proposed filter also reduces the computational burden and enhances the navigation system's reliability. The observability analysis confirms the characteristics of inevitably unbounded position error growth in dead reckoning navigation systems.

• 한국멀티미디어학회논문지
• /
• 제3권3호
• /
• pp.224-233
• /
• 2000

본 논문은 인간과 VR환경과의 상호작용을 지원하는 중요한 요소 중 하나인 이동의 문제점 및 해 결 방법에 대하여 연구하였다. 이 논문에서 제시된 Intelligent Cruise-Control Navigation (ICCN)은 다중 사용자 환경의 가상공간을 이동할 때, 실세계와 유사한 이동방법을 제공하여 사용자로 하여금 가상공간에 대한 현장감 및 현실감의 제고에 초점을 두었다. ICCN은 사용자들이 가상공간에서 이동시 부가적인 입력이 없이도 일정한 속도로 이동을 지원하는 Constant Velocity Navigation, 이동 중 장애물 및 다른 사용자(아바타)와의 충돌현상을 감지 및 회피하는 Collision Detection and Avoidance, 그리고 충돌회피후 기존 방향으로의 계속된 이동을 지원하는 Path Adjustment등의 기능을 제공한다. ICCN은 사용자의 부가적인 노력의 감소 및 병행작업을 보장, 현실과 유사한 사용자 중심의 navigation 기 법 을 제공, 가상공간과 현실과의 괴리를 줄임으로써 가상현실이 추구하는 현실감 및 현장감을 높일 수 있도록 하였다. 실험을 통하여 본 연구에서 제안한 ICCN이 사용자중심의 매우 자연스럽고, 쉽고 편리한 가상공간 navigation 인터페이스라는 평가를 얻었다.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.141-147
• /
• 2008

In this paper, we present one approach to achieve safe navigation in indoor dynamic environment. So far, there have been various useful collision avoidance algorithms and path planning schemes. However, those algorithms have a fundamental limitation that the robot can avoid only "visible" obstacles. In real environment, it is not possible to detect all the dynamic obstacles around the robot. There exist a lot of "occluded" regions due to the limitation of field of view. In order to avoid possible collisions, it is desirable to consider visibility information. Then, a robot can reduce the speed or modify a path. This paper proposes a safe navigation scheme to reduce the risk of collision due to unexpected dynamic obstacles. The robot's motion is controlled according to a hybrid control scheme. The possibility of collision is dually reflected to a path planning and a speed control. The proposed scheme clearly indicates the structural procedure on how to model and to exploit the risk of navigation. The proposed scheme is experimentally tested in a real office building. The presented result shows that the robot moves along the safe path to obtain sufficient field of view, while appropriate speed control is carried out.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2018년도 추계학술대회
• /
• pp.256-257
• /
• 2018

This paper deals with the path-following control for marine surface vehicles with underactuated characteristics. In consideration of practical limitations of actuators, an improved DVS(dynamic virtual ship) guidance algorithm is proposed with the multi-level DVS optionally selected to be tracked. To address the output-feedback control issue, an adaptive FLS(fuzzy logical systems) is devised to online approximate the kinematic states. Based on that observing framework, the path-following control law is thereafter derived. Simulations testify effectiveness of the proposed scheme

• 한국항해항만학회지
• /
• 제31권7호
• /
• pp.563-568
• /
• 2007

In this paper, an adaptive neural network controller and its application to automatic berthing control of ship is presented. The neural network controller is trained online using adaptive interaction technique without any teaching data and off-line training phase. Firstly, the neural networks used to control rudder and propeller during automatic berthing process are presented. Secondly, computer simulations of automatic ship berthing are carried out in Pusan bay to verify the proposed controller under the influence of wind disturbance and measurement noise. The results of simulation show good performance of the developed berthing control system.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2022년도 추계학술대회
• /
• pp.168-169
• /
• 2022

In this study, we investigates the auto-berthing problem for the underactuated surface vessel in the presence of constraints of dynamic uncertainties, finite time, transmission load, and environmental disturbance. A novel control scheme is proposed by fusing the finite time control technology and the event-triggered input algorithm. In the algorithm, differential homeomorphism coordinate the transformation is used to solve the problem of underactuation. Then, we apply the finite time technology and event triggered to save the time of the berthing vessel and relieve transmission burden between the controller and the vessel respectively. Moreover, a radial basis function network is used to approximate unknown nonlinear functions, and minimum learning parameters are introduced to lessen the computational complexity. A sufficient effort has been made to verify the stability of the closed-loop system based on the Lyapunov stability theory. Finally, simulation results display the effectiveness of the proposed scheme.

• Journal of Astronomy and Space Sciences
• /
• 제32권4호
• /
• pp.387-393
• /
• 2015

This study presents a precise relative navigation algorithm using both laser and Global Positioning System (GPS) measurements in real time. The measurement model of the navigation algorithm between two spacecraft is comprised of relative distances measured by laser instruments and single differences of GPS pseudo-range measurements in spherical coordinates. Based on the measurement model, the Extended Kalman Filter (EKF) is applied to smooth the pseudo-range measurements and to obtain the relative navigation solution. While the navigation algorithm using only laser measurements might become inaccurate because of the limited accuracy of spacecraft attitude estimation when the distance between spacecraft is rather large, the proposed approach is able to provide an accurate solution even in such cases by employing the smoothed GPS pseudo-range measurements. Numerical simulations demonstrate that the errors of the proposed algorithm are reduced by more than about 12% compared to those of an algorithm using only laser measurements, as the accuracy of angular measurements is greater than $0.001^{\circ}$ at relative distances greater than 30 km.

• 제어로봇시스템학회논문지
• /
• 제7권9호
• /
• pp.774-782
• /
• 2001

In this paper, we propose a new approach to the autonomous and high-speed indoor navigation of wheeled mobile robots using hybrid system controller. The hierarchical structure of hybrid system presented consists of high-level reasoning process and the low-level motion control process and the environmental interaction. In a discrete event system, the discrete states are defined by the user-defined constraints and the reference motion commands are specified in the abstracted motions. The hybrid control system applied for the nonholonomic mobile robots can combine the motion planning and autonomous navigation with obstacle avoidance in the indoor navigation problem. For the evaluation of the proposed algorithm, the algorithm is implemented to the two-wheel driven mobile robot system. The experimental results show that the hybrid system approach is an effective method for the autonomous navigation in indoor environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국내학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.308-313
• /
• 1993

In this paper, the navigation computer design of RPV(remotely piloted vehicle) using GPS is investigated, and its hardware and software structures are described. The proposed hardware adopts the common PC configuration by using 5016A micro PC card and software is divided into several modules such as navigation module, guidance module and control module, etc. The performance of the navigation computer is verified through PILS(process in the loop simulation).