• Geomechanics and Engineering
• /
• v.23 no.4
• /
• pp.301-311
• /
• 2020

In this study, shear strength behavior of fine-grained soils was investigated under unsaturated conditions. The samples in the unsaturated state were subjected to a net normal stress (σ-u_a) of 40 kPa and different matric suctions (u_a-u_w) of 50, 100 and 150 kPa. The matric suction values applied in the triaxial tests were selected according to the bubbling pressures determined from the SWC curves. The study was carried out on prepared re-constituted cylindrical samples by uniaxial consolidation of soil slurries. First, consolidated drained (CD) triaxial compression tests were performed on the saturated samples and the cohesion and angle of internal friction were determined. After that, drained triaxial compression tests under matric suctions were performed on the unsaturated samples. In order to obtain unsaturated test results, cohesion and internal friction angle values of saturated samples were used. The nonlinear surface representing the shear strength surface was approximated consisting of two planes (double planar surface). The reason for the nonlinear behavior of some soils is that the amount of sand content contained in it is relatively high and the bubbling pressure/permanent water content value is relatively low.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.1
• /
• pp.1-8
• /
• 2009

This research was performed to assess a Fenton-like oxidation using naturally present iron in the field to treat remained oils throughout silty clay residues which finally resided even after a series of soil washing process. Biodegradability was thus tested for reaction products to investigate a possible treatment of the Fenton-like oxidation coupled with a biological treatment process. For those purposes, two types of field soil samples (e.g., dewatered cake after conditioning with a polymer and not-dewatered residue) were tested to remove TPH by adding the various concentration of hydrogen peroxide ($H_2O_2$). Moreover the biodegradability of treated samples was observed based on the ratio of $BOD_5/COD_{Cr}$ after Fenton-like oxidation. The Highest removal of TPH was at 1% of hydrogen peroxide ($H_2O_2$) when hydrogen peroxide ($H_2O_2$) was continuously injected for a period of time rather than that of spot introduction with the same amount of it. For the dewatered cake, TPH was effectively treated when the ratio of solid and water was mixed at 1 : 2. Employing cooking oil could increase solubility of TPH due to enhanced surface-active escalating TPH desorption from silty clay. Nonetheless, the biodegradability was decreased as long as the oxidation duration being extended regardless of operational conditions. It was therefore proved that Fenton-like oxidation using $H_2O_2$ and natural iron minerals was able to remove adsorbed oils in silty clay but the removal efficiency of TPH was low. And if a biological treatment process followed after Fenton-like oxidation, microorganisms would need enough time for acclimation.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.5-13
• /
• 2021

Liquefaction behaviors of two natural silty samples containing fines including clay of 50% or more (Sample No.1 was silt 44.1% and clay 8.8%, sample No.2 was silt 57.2% and clay 12.4%) were examined by a cyclic triaxial test. According to the results on samples containing 50% or more of fine particles, an increase in the fine content decreases the liquefaction resistance of the sample. In other words, when the fine content increases, the liquefaction state of sample is reached with a small number of cyclic loads. In the relationship between the excess pore water pressure ratio and the number of cycles, the slope of the excess pore water pressure ratio increases more steeply as the fine content increases. As a result of analyzing the liquefaction behavior of the two silts with the content of clay contained in the fines, liquefaction occurred more easily in the No.2 silt with high clay content. This result shows that the clay contained in the fines affects the liquefaction behavior of the silt.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.26 no.1
• /
• pp.29-37
• /
• 1984

This study was made to find several significant relations among various physical and mechanical properties including cone penetration resistance. The alluvial clay samples were taken at the Daebul Reclaimed Tideland in Samhomyeon, Yeongamgun, Jeonranamdo. The results of the study are summarized as follows; 1.Most samples belong to medium or high plastic, inorganic, silty clay(clay contents;32-64%, silt contents; 36-68%, sand contents; 0-3%). The specific gravities range from 2.70 to 2.73, the unit weights from 1.45 to 1. 75g/cm$^3$, the natural moisture contents from 45 to 77%, the liquid limits from 32 to 56%. It is certain that the foundation is weak because the natural moisture contents are much higher than the liquid limits. 2.It is known from the shear tests that the unconfined compression strenghs vary from 0.09 to 0. 38kg/cm2, the cohesions from 0.05 to 0. 21kg/cm2, the internal friction angles from 0 to 3˚. 3.The consolidation tests show that the initial void ratios range from 1.25 to 2.28, the compression indeices from 0.43 to 0.84, the preconsolidation loads from 0.21 to 0.74kg/cm$^2$. 4.Cone penetration resistances are usually less than 5kg/cm$^2$ from ground surface to the depth of about 8m, and from S to l0kg/cm$^2$ in the layer below about 8m to hard layer. 5.The cohesion and cone penetration resistance are in proportion to the depth of soil layer. 6.The correlations between various physical and mechanical properties including cone penetration resistance for the alluvial clay samples are as follows; a) Wn=0.944C+ l2.733 (r=0.829) b) LL=0. 728Cy+6. 991 (r=0. 873) c) PI=0.659Cy-8.168 (r=0.860) d) rt=0. 0077(272-Wn) =2.092-0. 0077Wn (r=0. 859) e) 60=0. 035wn-0 447 (r=0. 893) f) C=0.380qw+0.031 (r=0.816) g) qu=0.0707qc+0.029 (r=0.810) h) C=0.018Z+0.055 (r=O.802) I) qc=0. 415Z+1, 438 (r=0. 943)

• Journal of Environmental Impact Assessment
• /
• v.12 no.1
• /
• pp.9-22
• /
• 2003

To consider environmental characteristics in the scope of geochemistry of streams, Hwasun area, soil, sediment and water samples near/in the streams were analyzed in texture and metal contents of soil and sediment and in quality in water. From those analyses, the soils are loamy sand, sandy loam, loam and silty loam in texture. And, the sediments are slightly gravelly sand, gravelly sand and gravelly muddy sand in facies. Metal contents in soils and sediments are of high near Hwasuneup and Hwasun coalfield. In peculiar, P, Co, Li, Ni, Zn and Pb exceed over crust mean contents. Physico-chemistry of above streams according to pH-Eh and Piper's diagrams indicates that the streams are, typically, assigned to natural river water. Water qualities of BOD, T-N and T-P in areas near Hwasun coalfield, Dongmyeon and Hwasuneup are polluted over V level. Enrichment factor(EF) representing metal condensation in P, Cu, Zn and Pb appear near Hwasun coalfield and Hwasuneup from the soil and sediment samples, in part. Additionally, river water in dry season is very high in BOD, T-N, $Na^+$ and ${SO_4}^{2-}$. It is suggested that the relatively high metal contents in the stream be connected with above coalfield and urban areas.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.4
• /
• pp.4805-4811
• /
• 1978

This paper deals with the correlations between the results of the physical property tests and the mechanical property tests for estimating the mechanical indexes by the physical property test results. The soil samples were taken at changweon area, Gyeon-gsangnam-do, where the structures would be placed on the alluvial clay foundation. The outcomes of the study are as follows: 1. Judging from casagrande's plasticity chart, it is considered that the almost all soil samples belong to inorganic silty clay with medium plasticity (clay 14∼62%, silt 36∼73%, sand 1∼29%). The specific gravities are between 2.61 and 2.72, the wet unit weights 1.53g/㎤ and 1.93g/㎤, the liquid limits 28% and 51%, the plastic limits 15% and 31%, the plastic indexes 7% and 27%, the natural moisture contents 33% and 64%. 2. The unconfined compression strengths are between 0.07kg/$\textrm{cm}^2$ and 0.77kg/$\textrm{cm}^2$, the cohesions 0.04kg/$\textrm{cm}^2$ and 0.37kg/$\textrm{cm}^2$, the internal friction angles 0$^{\circ}$ and 9$^{\circ}$. 3. The consolidation tests show that the initial void ratios are between 0.68 and 1.68, the precompression loads 0.27kg/$\textrm{cm}^2$ and 1.15kg/$\textrm{cm}^2$, the compression indexes 0.12 and 0.59. 4. The correlations between the results of the physical property tests and the mechanical property tests for the soil samples are presented as follows: rt=0.011 (203-wn), Cc=0.025 (LL-27.2), Cc=0.46 (e0-0.58), Cc=0.013 (wn-23.2), C=0.021+qu/2.08, qu=2.268rt-3.635

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1122-1129
• /
• 2010

Various soil tests were performed in the laboratory after soil samples were obtained from natural terrains distributed on the granitic rocks where are located in Mt. Bukhan, Mt. Surak and Mt. Gwanak around Seoul. Through the comparison of soil properties in each mountain, the difference of soil properties in a similar geological condition was investigated. According to the result of soil test, the soils were generally classified into calyey and silty sands with a well grade. Soil densities are ranged from $2.62kg/cm^3$ to $2.67kg/cm^3$, and water contents of soils are ranged from 3.77% to 31.12%. These values are not sorted locally. The wet unit weights of soils are ranged from $1.092kg/cm^3$ to $1.814kg/cm^3$. It has a big difference between the average values because that of Mt. Bukhan is $1.604kg/cm^3$ and those of Mt. Surak and Mt. Gwanak are $1.500kg/cm^3$ and $1.331kg/cm^3$, respectively. The internal friction angles are ranged from $31^{\circ}$ to $39^{\circ}$ and the cohesions are ranged from 1.57kPa to 8.63kPa. The shear strengths are too high and similar in all regions. The coefficients of permeability are ranged from $3.07{\times}10^{-3}cm/sec$ to $4.61{\times}10^{-2}cm/sec$. So, these soils are evaluated as a middle to high permeable ground. On average, the value of Mt. Bukhan is $1.47{\times}10^{-2}cm/sec$ and the values of Mt. Surak and Mt. Kwanak are $1.29{\times}10^{-2}cm/sec$ and $1.66{\times}10^{-2}cm/sec$, respectively.

• The Journal of Engineering Geology
• /
• v.12 no.4
• /
• pp.471-484
• /
• 2002

Alluviums in the Keum River watershed cover an areal extent of $3,029{\;}\textrm{km}^2$ and contain about 8.1 billion tons of groundwater. However, the waters are severely polluted by nitrate, possibly due to the application of nitrogen fertilizer (>250 N kg/ha) on agricultural land. This paper aims to elucidate the pollution status and behaviors of nitrate in alluvial groundwaters in the Keum River watershed area, based on regional hydrogeochemical study. Most of the collected samples (n = 186) are polluted by nitrate (average = 42.2 mg/L, maximum = 295 mg/L). About 29% of the samples have the nitrate concentrations exceeding Korean Drinking Water Standard (44 mg/L $NO_3$). The distribution of nitrate concentrations in the study area is largely dependant on geochemical environments of alluvial aquifers. In particular, the decrease of redox potential of alluvial groundwaters showed a good correlation with the decreases of nitrate, iron, and manganese concentrations. Thus, the change of redox state in alluvial aquifers, likely reflecting their sedimentary environments, controls both the behavior and fate of nitrogen compounds and their natural attenuation (denitrification) in aquifers. A carbon-rich, silty layer within alluvium strata forms a reducing condition and possesses a buffering capacity on nitrate pollution.