• Korean Journal of Poultry Science
• /
• v.30 no.2
• /
• pp.119-128
• /
• 2003

The two experiments in this study compared litter nitrogen (N) contents after broiler chicks were raised for 42 days. Experiment I compared litter treated with aluminum sulfate (alum) [Al$_2$(SO$_4$)$_3$ㆍ14$H_2O$] (T$_1$) with nontreated litter (T$_2$) when the broiler chicks were fed the same levels of dietary protein (23% for 0∼3 weeks, 21% for 4∼6 weeks) Experiment 2 compared the alum treated litters of broiler chicks fed high protein diets (T$_3$) having 20.4% protein for 0∼3 weeks and 19.3% for 4∼6 weeks, with lower protein diets (T$_4$) having protein levels of 18.0% for 0∼3 weeks and 17.0% for 4 6 weeks. Each treatment had four replicate cages. As shown in Table 1, T$_1$ had a significantly (P<0.0l) lower pH and significantly (P<0.05) higher total N (TN), NH$_4$-N and inorganic N (IN) than T$_2$. T$_1$ and T$_2$ had similar moisture, organic carbon (OC), NO$_3$-N and organic N (ON). Alum treatment increased available N (AN) significantly (P<0.05) from 13.75$\pm$0.0l mg/g to 14.90$\pm$0.01 mg/g and predicted available N (PAN) significantly (P<0.05) from 15.00$\pm$0.0l to 16.50$\pm$0.02. The C : N ratios were 18.84$\pm$0.40 (T$_1$) and 19.46$\pm$0.10 (T$_2$) while the C : ON ratios were 28.49$\pm$1.15 (T$_1$) and 28.34$\pm$0.20 (T$_2$) although C : N ratios or C : ON ratios did not show any difference between T$_1$ and T$_2$. In Table 2, T$_3$ had significantly (P<0.05) higher moisture, TN, NH$_4$-N, ON and IN than T$_4$, while the pH, OC and NO$_3$-N were similar in both groups. The AN of T$_3$ increased significantly (P<0.05) from 10.99$\pm$0.0l mg/g to 12.98$\pm$0.03 mg/g, while the PAN increased significantly (P<0.05) from 12.39$\pm$0.10 mg/g (T$_4$) to 14.68$\pm$ 0.30 mg/g (T$_3$). The C : N ratios increased significantly (P<0.0l) from 20.07$\pm$0.20 (T$_3$) to 24.40$\pm$0.10 (T$_3$). The C : ON ratios also increased significantly (P<0.0l) from 28.99$\pm$1.15 (T$_3$) to 35.51$\pm$0.20 (T$_4$). These current research results show increased AN contents and PAN contents in alum treated litter or with increased CP levels regardless of alum treatment. However, none of the litters in this study could initially increase mineralization.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.4
• /
• pp.45-59
• /
• 2023

The global focus on mitigating climate change has traditionally centered on carbon dioxide, but recent attention has shifted towards methane as a crucial factor in climate change adaptation. Natural settings, particularly aquatic environments such as wetlands, reservoirs, and lakes, play a significant role as sources of greenhouse gases. The accumulation of organic contaminants on the lake and reservoir beds can lead to the microbial decomposition of sedimentary material, generating greenhouse gases, notably methane, under anaerobic conditions. The escalation of methane emissions in freshwater is attributed to the growing impact of non-point sources, alterations in water bodies for diverse purposes, and the introduction of structures such as river crossings that disrupt natural flow patterns. Furthermore, the effects of climate change, including rising water temperatures and ensuing hydrological and water quality challenges, contribute to an acceleration in methane emissions into the atmosphere. Methane emissions occur through various pathways, with ebullition fluxes-where methane bubbles are formed and released from bed sediments-recognized as a major mechanism. This study employs Biochemical Methane Potential (BMP) tests to analyze and quantify the factors influencing methane gas emissions. Methane production rates are measured under diverse conditions, including temperature, substrate type (glucose), shear velocity, and sediment properties. Additionally, numerical simulations are conducted to analyze the relationship between fluid shear stress on the sand bed and methane ebullition rates. The findings reveal that biochemical factors significantly influence methane production, whereas shear velocity primarily affects methane ebullition. Sediment properties are identified as influential factors impacting both methane production and ebullition. Overall, this study establishes empirical relationships between bubble dynamics, the Weber number, and methane emissions, presenting a formula to estimate methane ebullition flux. Future research, incorporating specific conditions such as water depth, effective shear stress beneath the sediment's tensile strength, and organic matter, is expected to contribute to the development of biogeochemical and hydro-environmental impact assessment methods suitable for in-situ applications.

• Microbiology and Biotechnology Letters
• /
• v.10 no.2
• /
• pp.133-144
• /
• 1982

The distribution of acid phosphatase activity was investigated with 141 microorganisms from the type culture collection of Chong Kun Dang laboratory and the 41 strains isolated from natural sources. The phytase activity was detected mainly with fungal strains. A fungus isolated from soil and identified as Aspergillus niger had shown the highest phytase activity. The environmental conditions for the enzyme formation by the isolate and some properties of the enzyme were also studied. The results obtained were as follows: (1) The highest phytase production was observed when the fungus was cultivated at 28$^{\circ}C$ for 5 days in the corn starch based medium using the cells incubated at 34$^{\circ}C$ for 3 days as a seed. (2) The optimal initial pH of the culture medium was found to around 2 for the formation of phytase. (3) Sucrose was proved to be one of the most effective carbon sources tested for the enzyme production. (4) As an inorganic nitrogen source, potassium nitrate was found to give a good result in the production of phytase. (5) Synthesis of phytase was significantly increased by the supplement with 0.2 % corn steep liquor to the basal medium as an organic nitrogen source. (6) At the concentration of 40-80 mg inorganic phosphate per liter of the culture medium, the enzyme formation revealed the highest level. But as the phosphate was increased above this optimum concentration the phytase activity was drastically decreased although the cell density showed to be still increasing

• Journal of Environmental Impact Assessment
• /
• v.16 no.6
• /
• pp.393-405
• /
• 2007

To examine the sedimentary geochemical characteristics of sediment in the Tamjin River and Doam bay, the analysis was conducted, using the sample obtained in February 2000, on the grain size and the contents of metallic elements and organic carbon. The factors that influence the geochemical behavior of metallic elements in the surface sediment are grain size, organism, surrounding soil and $CaCO_3$. To find out the pollution level of metallic elements, the enrichment factor (EF) and the index of geoaccumulation ($I_{geo}$) were researched. The majority of metallic elements sustain their values in natural state. The elements such as K, Ba, Zr, etc. appear to be rich in some places. The EF and $I_{geo}$ of P, Cu, Zn, and Pb, which belong to toxic heavy metals, are partly related with man-made pollution. P and Cu have a high EF, Pb has a high $I_{geo}$ and Zn is high in both EF and $I_{geo}$. The low contents of P and Cu are not likely to be related with the pollution of water environment. However, given the development of relative pollution, the research and the management regarding the pollutants are needed. Because Pb, naturally enriched by geological characteristics, has a large influence on water environment along with Zn, the adequate measures against man-made pollution should be worked out.

• Journal of Korea Port Economic Association
• /
• v.36 no.3
• /
• pp.21-38
• /
• 2020

Currently, in-port emissions are a serious problem in port cities. However, emissions, especially non-greenhouse gases, from the operation of cargo handling equipment (CHE) have received significant attention from scientific circles. This study estimates the amount of emissions from on-land port diesel-powered CHE in the Port of Incheon. With real-time activity data provided by handling equipment operating companies, this research applies an activity-based approach to capture an up-to-date and reliable diesel-powered CHE emissions inventory during 2017. As a result, 105.6 tons of carbon monoxide (CO), 243.2 tons of nitrogen oxide (NOx), 0.005 tons of sulfur oxide (Sox), 22.8 tons of particulate matter (PM), 26.0 tons of volatile organic compounds (VOCs), and 0.2 tons of ammonia (NH3) were released from the landside CHE operation. CO and NOx emissions are the two primary air pollutants from the CHE operation in the Port of Incheon, contributing 87.71% of the total amount of emissions. Cranes, forklifts, tractors, and loaders are the four major sources of pollution in the Port of Incheon, contributing 84.79% of the total in-port CHE emissions. Backward diesel-powered machines equipped in these CHE are identified as a key cause of pollution. Therefore, this estimation emphasizes the significant contribution of diesel CHE to port air pollution and suggests the following green policies should be applied: (1) replacement of old diesel powered CHE by new liquefied natural gas and electric equipment; (2) the use of NOx reduction after-treatment technologies, such as selective catalytic reduction in local ports. In addition, a systematic official national emission inventory preparation method and consecutive annual in-port CHE emission inventories are recommended to compare and evaluate the effectiveness of green policies conducted in the future.

• Journal of the Korean earth science society
• /
• v.21 no.6
• /
• pp.683-694
• /
• 2000

Abstrace: The palaeodepositional environment and age of the Cretaceous Hampyeong Basin (southwestern Korea) are reassessed based on new geochemical, lithological, sedimentological, and palaeobotanical data. Results indicate that the Hampyeong Basin was a tectonically active basin comprising predominantly fluvial and lacustrine sediments. Four distinctive facies types have been identified (acidic tuff, black shales/sandstones, red beds, intermediate tuff with tuffaceous conglomerate) and these reflect periods of significant environmental change within the basin and its neighbouring terrains. Volcanism driven by tectonic events provides a source for much of the sediment. The sedimentary sequences compare well with those in the neighbouring Haenam Basin. Sediments of volcanic origin are similar to those of the Neungju Formation of the Yuchon Group. The widespread occurrence of black shales is indicative of extended periods of deposition under anoxic conditions. Measurements of total organic carbon show that the values for the black shales (0.81% to 1.75%) are the average for petroleum source shales. Fossil plants occurred in the black shales and sandstones. The occurrence of platanoid leaves places these sediments in Oishi's angiosperm series, which is consistent with an Aptian/Albian or younger age.

• Applied Biological Chemistry
• /
• v.19 no.3
• /
• pp.130-138
• /
• 1976

In order to utilize the agricultural waste products, two strains of mold producing powerful cellulolytic enzyme were sereened from various soils, composts, rotten wood and others. The optimum condition of cellulase production was studied. The results obtained were summarized as follows. 1. Two strains of mold which showed remarkably high cellulolytic activity were identified as Aspergillus niger-SM 6 and Trichoderma viride-SM 10. 2. The highest cellulase production was obtained at pH 5.0-6.0 in 5 days. 3. Cellulase production in strain Aspergillus niger-SM 6 increased with the addition of C.M.C., $(NH_4)_2SO_4$, C.S.L., orange peel powder and rice hull. The rice hull, treated with 3N NaOH at $120^{\circ}C$ for 15 min. and neutralized with various acids, was used. Up to 50% of wheat bran could be substituted by the treated rice hull without any decrease of cellulase activity. 4. In the strain of Trichoderma viride-SM 10, cellulase production increased with the addition of C.M.C., $NH_4NO_3$, Vitamin-free casamino acid and orange peel powder, while the other carbon, nitrogen, phosphate sources, natural nutrients and organic substances gave no remarkable effect.

• Membrane Journal
• /
• v.27 no.6
• /
• pp.499-505
• /
• 2017

The increasing number of natural disasters resulting from anthropogenic greenhouse gas emissions has prompted the development of a gas separation membrane. Carbon dioxide ($CO_2$) is the main cause of global warming. Organic polymeric membranes with inherent flexibility are good candidates for use in gas separation membranes and poly(dimethyl siloxane)(PDMS) specifically is a promising material due to its inherently high $CO_2$ diffusivity. In addition, poly(vinyl pyrrolidine)(PVP) is a polymer with high $CO_2$ solubility that could be incorporated into a gas separation membrane. In this study, poly(dimethyl siloxane)-poly(vinyl pyrrolidine)(PDMS-PVP) comb copolymers with different compositions were synthesized under mild conditions via a simple one step free radical polymerization. The copolymerization of PDMS and PVP was characterized by FTIR. The morphology and thermal behavior of the produced polymers were characterized by transmission electron microscopy (TEM), thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). Composite membranes composed of PDMS-PVP on a microporous polysulfone substrate layer were prepared and their $CO_2$ separation properties were subsequently studied. The $CO_2$ permeance and $CO_2/N_2$ selectivity through the PDMS-PVP composite membrane reached 140.6 GPU and 12.0, respectively.

• Clean Technology
• /
• v.28 no.2
• /
• pp.174-181
• /
• 2022

Biomass is a sustainable alternative resource for production of liquid fuels and organic compounds that are currently produced from fossil fuels including petroleum, natural gas, and coal. Because the use of fossil fuels can increase the production of greenhouse gases, the use of carbon-neutral biomass can contribute to the reduction of global warming. Although biological and chemical processes have been proposed to produce petroleum-replacing chemicals and fuels from biomass feedstocks, it is difficult to replace completely fossil fuels because of the high oxygen content of biomass. Production of petroleum-like fuels and chemicals from biomass requires the removal of oxygen atoms or conversion of the oxygen functionalities present in biomass derivatives, which can be achieved by catalytic hydrodeoxygenation. Hydrodeoxygenation has been used to convert raw biomass-derived materials, such as biomass pyrolysis oils and lignocellulose-derived chemicals and lipids, into deoxygenated fuels and chemicals. Multifunctional catalysts composed of noble metals and transition metals supported on high surface area metal oxides and carbons, usually selected as supports of heterogeneous catalysts, have been used as efficient hydrodeoxygenation catalysts. In this review, the catalysts proposed in the literature are surveyed and hydrodeoxygenation reaction systems using these catalysts are discussed. Based on the hydrodeoxygenation methods reported in the literature, an insight for feasible hydrodeoxygenation process development is also presented.

• Membrane Journal
• /
• v.33 no.3
• /
• pp.94-109
• /
• 2023

1,3-Dioxolane is an exciting material that has attracted widespread interest in the chemical, paint, and pharmaceutical industries as a solvent, electrolyte, and reagent because 1,3-dioxolane is not toxic, carcinogenic, explosive, auto-flammable, and multifunctional, and due to their excellent miscibility in most organic and aqueous solvent conditions. Recently, this material has received increasing attention as a CO₂-selective polymer precursor to separating CO₂ from flue gas and natural gas mixtures. Poly(1,3-dioxolane) (PDXL) possesses higher ether oxygen content than polyethylene oxide (PEO), which demonstrates superior membrane CO₂/N₂ separation properties owing to their polar ether oxygen groups exhibiting strong affinity toward CO₂. Thus, PDXL-based membranes displayed an outstanding CO₂ solubility selectivity over non-polar (N₂, H₂, and CH₄) gases. However, the polar groups of PDXL, like PEO, promote chain packing efficiency and cause polymer crystallization, thereby reducing its gas permeability, which should be improved. In this short review, we discuss the recent advancement and limitations of PDXL membranes in gas separation applications. To conclude, we provide future perspectives for inhibiting the limits of 1,3-dioxolane-based polymers in the CO₂ separation process.