• 공업화학
• /
• 제32권5호
• /
• pp.562-568
• /
• 2021

천연 밀배아유와 복합 sugar ester를 이용하여 밀배아유 원료 O/W (oil in water) 유화액을 제조하였다. HLB 값, 유화제의 첨가량 및 유화시간이 O/W wheat germ oil 유화액의 평균 입자크기, 유화점도 및 ESI에 미치는 영향을 조사하였으며, 반응표면분석방법인 중심합성계획모델에 의해 제조된 유화과정의 파라미터를 모의하고 최적화하였다. O/W wheat germ oil 유화액의 제조를 위한 최적의 공정조건은 HLB 값(hydrophile-lipophile balance value)은 8.4, 유화제의 첨가량은 6.4 wt%, 유화시간은 25.4 min이며, 최적조건에서 중심합성계획(central composite design, CCD-RSM) 모델을 통한 예측 반응치는 7일 후의 유화액을 기준으로 MDS (mean droplet size)= 206 nm, 점도 = 8125 cP, ESI 98.2%이었다. 또한 실제 실험을 통해 얻어진 유화액의 MDS, 점도 및 ESI는 각각 209 nm, 7974 cP 및 98.7%로 나타났다. 따라서 중심합성계획 모델을 통해 밀배아유 원료 유화액의 안정성을 평가하는 최적화 과정을 설계할 수 있었다.

• 공업화학
• /
• 제34권2호
• /
• pp.137-143
• /
• 2023

본 연구에서는 알팔파로부터 추출한 천연계면활성제를 사용하여 중심합성설계모델(CCD-RSM)을 이용한 O/W 유화제조 공정의 최적화를 수행하였다. 그 결과 95% 신뢰구간에서 최적화 결과의 통계학적 합리성을 확인하였다. CCD-RSM을 통하여 독립변수인 알팔파 추출물:Sugar ester S-370의 혼합비율(P), 계면활성제의 첨가량(W) 및 유화속도(R)가 반응치인 유화안정도지수(ESI), 평균입자크기(MDS) 및 점도(V)에 끼치는 영향을 조사하여 O/W 유화제조공정의 최적조건을 산출하였다. 유화안정도지수, 평균입자크기 및 점도에 관한 회귀방정식으로부터 다중반응을 수행하여 3가지 반응치를 동시에 만족하는 최적 유화조건으로 알팔파 추출물:Sugar ester S-370의 혼합비율은 49.5 wt%, 계면활성제의 첨가량 9.1 wt%, 유화속도 6559.5 rpm으로 나타났으며 산출된 반응치의 응답값은 ESI는 89.9%, MDS는 1058.4 nm, V는 1522.5 cP로 산출되었다. 이를 실험으로 확인한 결과 ESI는 88.7%, MDS는 1026.4 nm, V는 1486.5 cP이었으며 평균 오차율은 2.3 (± 0.4)%이었다. 따라서 CCD-RSM을 실제 유화 제조에 적용하여 만족스러운 O/W 유화제조 공정조건을 얻을 수 있었다.

• 한국응용과학기술학회지
• /
• 제30권4호
• /
• pp.656-663
• /
• 2013

본 연구는 식품으로 사용하고 있는 유산균의 보존성과 안정성을 높이고, 맛과 시각적인 차별화를 주기 위한 방법으로 더블매트릭스 캡슐화에 대한 제조방법에 대하여 기술하였다. 일차캡슐화방법으로 5wt%의 슈크로스에스터를 이용하여 부드럽고 촉촉한 크림을 만들었다. 더블매트릭스캡슐화는 키토산과 아르긴산을 1:3의 비율로 혼합하여 제조하였을 때 가장 안정한 캡슐이 형성되었다. 더블매트릭스 캡슐입자의 크기는 지름이 3mm이었다. 유산균의 pH변화에 대한 활성은 산성($pH=4.3{\pm}0.3$)이나 중성($pH=7.12{\pm}0.2$)상태에서보다 알칼리성 ($pH=10.5{\pm}0.3$)에서 더욱 우수한 활성을 보였다. 1개월 경과 후에서도 살아있는 유산균의 활성을 확인할 수 있었다. 식품산업에 응용으로 요거트안에 유산균캡슐이 함유된 제형과 5가지의 색상을 입힌 더블매트릭스캡슐을 개발하였다. 이상의 결과로 볼 때, 유산균을 안정화시키는 방법의 하나의 도구로써, 더블매트릭스캡슐이 식품산업에 크게 기여할 것으로 기대된다. 더 나아가 의약품산업에서 인슐린 등의 캡슐화를 통한 약물전달시스템 (drug delivery system) 및 화장품산업에서의 활성성분의 안정화 기술에 응용이 가능할 것으로 기대한다.

• 한국응용과학기술학회지
• /
• 제13권3호
• /
• pp.61-71
• /
• 1996

In acid-catalyzed acetal cyclization of long aliphatic aldehydes($R=n-C_7H_{15}$ ; $n-C_9H_{19}$ ; $n-C_{11}H_{23}$) with 1,1,1-tris(hydroxymethyl)propane, 2-alkyl-5-hydroxymethyl-5-ethyl-1,3-dioxanes were obtained. The final products, sodium 2-alkyl-5-(sulfonatedpropylethermethyl)-5-ethyl-1,3-propanesultion in the presence of sodium hydride. These compounds were a new group of destructible surfactants which were readily hydrolyzed and oxidized in natural water reservoirs. Physical properties of these new compounds involved some surface properties such as Krafft point(Kp), critical micelle concentration(cmc), surface tension of aqueous solutions near cmc(${\gamma}_{min}$), foaming power, emulsion power and hydrolysis properties were determined. The destructible surfactants containing 1,3-dioxane ring were synthesized to about $85{\pm}5.5%$ yield. The cmc values of the compounds by ring method were assumed to $0.5{\sim}5.0{\times}10^{-3}mol/L$ range and surface tensions at cmc were $29.5{\sim}33.0dyne/cm$ respectively at $25^{\circ}C$. The foaming power and foam stability were $170{\sim}230mm$ and $52{\sim}135mm$ respectively at $1{\times}10^{-2}mol/L$, foam was occurred rarely below $1{\times}10^{-3}mol/L$. The emulsion property of liquid paraffin was better than that of soybean oil. For hydrolysis property with ph and time, these compounds were decomposed within about 200minutes at $ph1{\sim}2$. Hopefully these compounds are expected to be a good O/W emulsifier that have decomposability in acid and may be used in the process which do not need foaming.

• 한국의류학회지
• /
• 제17권3호
• /
• pp.347-358
• /
• 1993

Graft copolymerization of MMN4-VP onto cotton fiber using Ce(IV) salt as an initiator and triton X-100 as an emulsifier was performed under various polymerization conditions. In cograft polymerization, the polymeization behavior according to variation of 4-VP feed composition and the characteristics of MMA/4-VP graft polymer such as affinity for acid dye owing to cationization of cotton, antibacterial activity and thermal behavior were investigated. The results of this study were as follows : 1. While in copolymerization of MMA and 4-VP, 4-VP content in copolymer was more than that of monomer feed composition. 2. Increasing 4-VP content, graft yield was decreased, but graft efficiency was increased. In case of MMA/4-VP graft polymerization, the highest graft yield was obtained at higher CAN concentration than in MMA graft polymerization, the reason is that the behavior of 4-VP was disturbed by Ce(IV) sail 3. Elevation of temperature resulted in increase of graft yield and the apparent activation energy of MMA/4-VP graft polymerization was higher than that of MMA graft polymerization. 4. MMA/4-VP grafted cotton fiber showed affinity for acid dye, antibacterial activity and higher moisture regain than MMA grafted cotton fiber. MMA/4-VP grafted cotton fabric showed improvement of wrinkle recovery up to 40~50% graft yield and decreased thereafter. MMA/4-VP and MMA grafted cotton fabric did not showed significant difference in wrinkle recovery and stiffness.

• 한국식품저장유통학회지
• /
• 제11권2호
• /
• pp.142-147
• /
• 2004

고추씨기름의 수요는 날로 증가하는데 비하여 국내에서 고추씨의 수급은 어려워지고 있는 실정이다. 이에 따라 고추향미유(red pepper seasoning oil, RPSO)의 개발이 시급한 과제로 떠오르고 있다. 그 동안 몇 군데 업체에서 이와 유사한 향미유가 개발되어 시판되고 있지만 이는 단순하게 매운맛만 부여했을 뿐 향이 전혀 없는 등 많은 문제점을 내포하고 있다. 이에 옥수수기름을 원료유로 하여 여기에 Oleoresin Capsicum과 Oleoresin Paprika를 첨가하여 기본적으로 매운맛과 고추 고유의 붉은 색상을 부여하였다(simulated seasoning oil, SSO1). 그러나 검붉은 고추 고유의 색상을 얻기 어려워 치자, 고량 등의 천연물로부터 주정추출법을 이용하여 색소를 추출한 후 유화 처리하여 별도로 제조한 검정색 천연색소를 첨가하였다(SSO2). 또한, 통고추가루와 물을 혼합하고 여기에 소량의 인산염을 처리한 후 열수추출 과정을 거쳐 얻어진 고추추출물을 monogly로 유화시켜 SSO2에 혼합함으로써 고유의 매운 맛을 강화하였다(SSO3). 이러한 과정을 거쳐 제조된 향미유의 매운 맛과 색상은 고추씨기름과 유사하였으나 매운 향의 부여는 별도의 과정이 필요하였다. 이에 고추 가루와 고추씨를 동시에 이용하여 직화를 통한 roasting을 하고 여기에 옥수수기름 일부를 가하여 용출을 시도하였다(고추씨기름 원액, SSO4). 여기서 얻어진 고추씨기름 원액(SSO4)을 전체의 5%(w/w) 범위로 SSO3와 혼합하여 최종 RPSO를 제조하였다.

• The Plant Pathology Journal
• /
• 제25권3호
• /
• pp.280-285
• /
• 2009

Powdery and downy mildews caused by Sphaerotheca fusca and Pseudoperonospora cubensis are the most common and serious diseases of cucumber worldwide. In spite of the introduction of highly effective systemic fungicides, control of these diseases remains elusive. Hence, this study aimed to develop an alternative method to chemicals in controlling the diseases by using different types of cooking oil. Egg yolk, which contains a natural emulsifier, lecithin, was selected as a surfactant to emulsify the oils. Among the different cooking oils used, soybean, canola (rape seed), safflower, sunflower, olive, and corn oils showed over 95% control values against powdery mildew of cucumber in a greenhouse test. In particular, 0.3% canola oil emulsified with 0.08% yolk (1 yolk and 60 ml canola in 20 l spray) was found to be the most effective. The treatment resulted in 98.9% and 96.3% control efficacies on powdery and downy mildews, respectively, of cucumber in the field. Canola oil exhibited direct and systemic effect, wherein powdery mildew of cucumber was suppressed only on treated leaves but not on non-treated leaves in a plant, while mycelia and conidia of the pathogen were severely distorted or destroyed by the treatment. The prospect of using the canola oil and yolk mixture as a natural fungicide is highly promising because of its effectiveness, availability, low cost, simple preparation, and safety to humans and the environment. The use of the canola oil and yolk mixture is expected to be an effective fungicide for use in organic farming and home gardening.

• Macromolecular Research
• /
• 제9권5호
• /
• pp.267-276
• /
• 2001

In order to endow with new bioactive functionality from demineralized bone particle (DBP) as natural source to poly(L-lactide) (PLA) synthetic biodegradable polymer, porous DBP/PLA as natural/synthetic composite scaffolds were prepared and compared by means of the emulsion freeze drying and solvent casting/salt leaching methods for the possibility of the application of tissue engineered bone and cartilage. For the emulsion freeze drying method, it was observed that the pore size decreased in the order of 79$\mu\textrm{m}$ (PLA control) > 47$\mu\textrm{m}$ (20% of DBP) > 23 $\mu\textrm{m}$ (40% of DBP) > 15$\mu\textrm{m}$ (80% of DBP). Porosities as well as specific pore areas decreased with increasing the amount of DBR. It can be explained that DBP acts like emulsifier resulting in stabilizing water droplet in emulsion. For the solvent casting/salt leaching method, a uniform distribution of well interconnected pores from the surface to core region were observed the pore size of 80 ∼70 $\mu\textrm{m}$ independent with DBP amount. Porosities as well as specific pore areas also were almost same. For pore size distribution by the mercury intrusion porosimeter analysis between the two methods, the pore size distribution of the emulsion freeze drying method was broader than that of the solvent casting/salt leaching method due to the mechanism of emulsion formation. Scaffolds of PLA alone, DBP/PLA of 40 and 80%, and DBP powder were implanted on the back of athymic nude mouse to observe the effect of DBP on the induction of cells proliferation by hematoxylin and eosin staining for 8 weeks. It was observed that the effect of DBP/PLA scaffolds on bone induction are stronger than PLA scaffolds, even though the bone induction effect of DBP/PLA scaffold might be lowered than only DBP powder, that is to say, in the order of DBP only > DBP/PLA scaffolds of 40 and 80% DBP > PLA scaffolds only for osteoinduction activity. In conclusion, it seems that DBP plays an important role for bone induction in DBP/PLA scaffolds for the application of tissue engineering area.