• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2001년도 가을 학술발표회 논문집
• /
• pp.261-268
• /
• 2001

Highway bridges are important infrastructures for national transportation systems. However, due to overweight trucks frequently moving on highways, highway structures have been gradually damaged and economical loss has grown severe. To maintain a highway bridge safe and sound, properties and loading characteristics of passing trucks on the bridge must be evaluated WIM(Weigh-In-Motion) systems have been developed by many research groups for multiple purposes. Most of the developed WIM systems have applied moment influence lines to identify loading characteristics. Since passing trucks are dynamic loads, however, the identified loads by the influence lines for static loads cannot represent the actual situation correctly. The current research investigates the effects of problem of different loading characteristics on load identification and proposes a new algorithm using the concept of moment influence surface. A numerical simulation study is carried out.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 2002년도 춘계공동학술대회
• /
• pp.717-723
• /
• 2002

Due to the development of information technology, IT industry has become the core factor of a country competence. So we recognized the importance of information network technology as a basis of IT industry. The infrastructure and service in domestic super-highway information networks show the rapid growth both in quantity and quality because of the government programs. However, foreign information network equipment companies have most of the domestic market-share and have controlled core part of the industry, thus national companies are having a difficulty in penetrating the industry market. In this paper, we will analyze domestic super-highway information network equipment industry and make its activating plan using competitive strategy model.

• 대한교통학회지
• /
• 제13권1호
• /
• pp.125-152
• /
• 1995

The purposes of this study are twofold ; (1) to investigate the accuracy of estimation power of the individual models. such as those of Highway Capacity Nanual (HCM), Korea Highway Capacity Manual (KHCM), and NationalCooperative Highway Research Program(NCHRP) Report339 ; and (2) to develop an adjusted delay model which can be applied to the signal control system in urban areas. The study is mainly focused on four subjects related to the research purposes, which are as follows ; (1) characteristecs of exsisting delay models ; (2) inherent problems in exsisting delay models : (3) validation of the proposed model by the comparison of observed delay with estimated delay :and (4) a method which can be applied to develop an appropriate delay model for actrual signal control systems by the adjusted fact of the proposed model.

• 한국환경과학회지
• /
• 제19권11호
• /
• pp.1375-1384
• /
• 2010

Growth in population and urbanization has progressively increased the loading of pollutants from nonpoint sources as well as point sources. Especially in case of road regions such as city trunk road, national road and highway are rainfall and pollutants runoff intensive landuses since they are impervious and emit a lot of pollutants from vehicle activity. This research was conducted to investigate the nonpoint sources concentration and quantifying stormwater pollutants which are contained in rainfall runoff water. Three different monitoring sites in Jinju and Changwon city were equipped with an automatic rainfall gauge and flow meter for measuring rainfall and the volume of rainfall runoff. In the case of average EMC value, city trunk road was shown the highest value in target water quality items like as BOD, COD, SS, TN and TP. Or the amount of runoff loads by water quality items showed the highest value in city trunk road. And runoff load in city trunk road was 43.8 times high value compared to highway by value of city trunk road $356.7 mg/m^2$, highway $8.150 mg/m^2$, national road $19.99 mg/m^2$ in the case of BOD.

• International Journal of Automotive Technology
• /
• 제8권4호
• /
• pp.513-520
• /
• 2007

In this paper, we propose an approach to identify the driving environment for intelligent highway vehicles by means of image processing and computer vision techniques. The proposed approach mainly consists of two consecutive computational steps. The first step is the lane marking detection, which is used to identify the location of the host vehicle and road geometry. In this step, related standard image processing techniques are adapted for lane-related information. In the second step, by using the output from the first step, a four-stage algorithm for vehicle detection is proposed to provide information on the relative position and speed between the host vehicle and each preceding vehicle. The proposed approach has been validated in several real-world scenarios. Herein, experimental results indicate low false alarm and low false dismissal and have demonstrated the robustness of the proposed detection approach.

• Geomechanics and Engineering
• /
• 제27권6호
• /
• pp.573-582
• /
• 2021

From the effect of bound water, this study aims to seek the potential reasons for difference of mechanical experiment results of subgrades soils. To attain the comparatively test condition of bound water, dry forming (DF) and wet forming (WF) were used in the specimen forming process before testing, series of laboratory tests, i.e., CBR tests, direct shear tests and compaction tests. The measured optimal moisture contents, maximum dry densities, CBR, cohesion c, and internal friction angle 𝜑 were given contrastive analysis. Then to detect the adsorptive bound water in the subgrade soils, the thermal gravimetric and differential scanning calorimetry (TG-DSC) test were employed under different heating rates. The free water, loosely bound water and tightly bound water in soils were qualitatively and quantitatively analyzed. It was found that due to the different dehydration mechanics, the lost bound water in DF and WF process show their own characteristics. This may lead to the different mechanical properties of tested soils. The clayey particles have a great influence on the bound water adsorbed ability of subgrade soils. The more the clay content, the greater the difference of mechanical properties tested between the two forming methods. Moreover, in highway construction of southern China, the wet forming method is recommended for its higher authenticity in simulating the subgrade filed humidity.

• Asian Journal of Atmospheric Environment
• /
• 제6권2호
• /
• pp.96-103
• /
• 2012

Ambient particulate matter (PM) and particle-bound polycyclic aromatic hydrocarbon (PAH) concentrations were measured continuously for 70 days at a Korean elementary school located near a highway. The $PM_{10}$, $PM_{2.5}$, and $PM_1$ values were measured with a light-scattering, multi-channel, aerosol spectrometer (Grimm, Model 1.107). The number concentrations of the particles were measured using a scanning mobility particle sizer and counter (SMPS+C) which counted particles from 11.1 to 1083.3 nm classified in 44 channels. Particle-bound PAHs were measured with a direct reading, photoelectric aerosol sensor. The daily $NO_2$, $SO_2$, and CO concentrations were obtained from a national air-monitoring station located near the school. The average concentrations of $PM_{10}$, $PM_{2.5}$, and $PM_1$ were 75.3, 59.3, and $52.1{\mu}g/m^3$, respectively. The average number concentration of the ultrafine particles (UFPs) was $46,307/cm^3$, and the averaged particle-bound PAHs concentration was $17.9ng/cm^3$ during the study period. The ambient UFP variation was strongly associated with traffic intensity, particularly peak concentrations during the traffic rush hours. Particles <100 nm corresponded to traffic-related pollutants, including PAHs. Additional longterm monitoring of ambient UFPs and high-resolution traffic measurements should be carried out in future studies. In addition, transient variations in the ambient particle concentration should be taken into consideration in epidemiology studies in order to examine the short-term health effects of urban UFPs.

• 한국도로학회논문집
• /
• 제17권1호
• /
• pp.17-24
• /
• 2015

PURPOSES : Recently, crack, rutting, and stripping problems from the surface of asphalt pavements in National highway are observed and they affect the drivers to feel uncomfortable on the road. Surface treatments are recommended to use in distressed pavements due to cost-effective, and improvement of surface performance. The purpose of this study is to evaluate the performance of micro-surfacing and polymer slurry seal treatments for distressed asphalt pavements. METHODS : Surface conditions and friction resistance are evaluated for asphalt pavements treated with micro-surfacing and polymer slurry seal mixes in National highway 30 line and 34 line. Visual observation is conducted and surface performance is measured by PES (Performance Evaluation Surveyor) in terms of crack ratio, rutting and IRI(International Roughness Index). BPN(British Pendulum Number) is measured by BPT(British Pendulum Tester) to evaluate the friction resistance in the field. RESULTS : The surface evaluation results are presented for asphalt pavement treated with micro-surfacing and polymer slurry seal treatments in National highway 30 line and 34 line. Based on the visual observation, micro-surfacing and polymer slurry seal treatments show better improvements in terms of cracks and stripping. Based on the surface conditions measured by PES vehicle, the surface performance of micro-surfacing treatments improves from 53.3% to 54.2% and the surface performance of polymer slurry seal treatments improves from 21.6% to 59.7%. However, the friction resistance of both micro-surfacing and polymer slurry seal treatments decreases from 2.5% to 6.7%. Further, it should be verified to produce the surface exposed with aggregates during the construction process of both treatment methods in the field. CONCLUSIONS : Based on the performance evaluation results in the filed, the surface performance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments improves from 21.6% to 59.7%. While, the friction resistance of asphalt pavement treated with micro-surfacing and polymer slurry seal treatments does not improve. It can be concluded that current micro-surfacing and polymer slurry seal treatments would improve surface performance but would not improve the friction resistance.

• 한국도로학회논문집
• /
• 제12권3호
• /
• pp.87-92
• /
• 2010

환경친화적인 도로건설의 개념은 최근에 많이 언급되고 있으나 실제로 측정할 수 있는 방법론이 전무한 실정이다. 특히 환경친화성을 현장에 적용하기 위해서는 계획단계에서 적용할 수 있는 방법론이 개발되어야 한다. 본 연구의 목적은 일반국도의 환경친화성을 평가할 수 있는 방법을 개발하여 현장에 적용할 수 있도록 하는 것이다. 평가지표 개발을 위해 환경영향평가에서 제시하고 있는 총 10개 분야에서 8개의 환경친화성 지표를 선정하였으며, 정성적 평가기법과 정량적 평가기법을 함께 적용하기 위해 정성적 평가방법으로는 계층화분석법(Analytic Hierarchy Process)을 사용하였으며, 정량적 평가방법으로는 일반국도 구간에서 지표에 대한 수치를 적용하였다. 환경친화성 지표선정을 위해 시범적용된 일반국도 구간은 총 10개 구간에 120km의 연장으로 구성되어 있다. 본 연구에서 제시된 평가방법론은 일반국도의 환경에 대한 적용수준을 평가할 수 있으며, 적용에 대한 이해가 쉽고 데이터의 수집이 간편하다. 이러한 방법론을 통해 도로건설시에 환경친화성을 평가하고 보완할 수 있는 도구로 이용이 가능할 것이다. 또한 여러 도로구간들의 환경친화성에 대한 비교를 통해 환경친화성을 높일 수 있는 근거로 사용이 가능할 것으로 판단된다.

• 한국도로학회논문집
• /
• 제9권3호
• /
• pp.1-12
• /
• 2007

우리나라의 도로는 종류별로 관리주체가 서로 다르다. 고속국도는 한국도로공사, 일반국도는 건설교통부, 지방도는 광역자치단체, 시 군도는 기초자치단체에서 건설 관리 및 운영 책임을 맡고 있다. 본 연구에서는 이렇듯 관리주체가 다른 우리나라의 도로에서 발생하고 있는 교통사고발생 추세를 도로종류별로 분석하는데 목적이 있다. 이를 위해 과거로부터 축적된 도로종류별 교통사고건수, 사망자수, 부상자수의 자료를 기반으로 사고위험을 단순건수, 도로연장 당 건수, 그리고 대 km당 건수로 비교하였다. 그 결과 단순 건수에 의한 비교에서는 도시부 도로가 전 부문에서 가장 위험하고 고속국도는 전 부문에서 가장 안전한 것으로 분석되었다. 그러나 1km당 발생건수는 일반국도가 가장 위험하고 지방도가 가장 안전한 것으로 분석되었다. 교통사고 발생률을 가장 객관적으로 비교할 수 있는 지표인 10만 차량 대 km당 비교에서는 일반국도가 가장 위험하고, 고속국도가 상대적으로 안전한 것으로 분석되었다. 한편, 도로종류별 사망자수 추세를 설명하는 시계열 분석모형을 개발한 결과 고속국도, 지방도, 도시부도로의 경우 AR(1)모형이 추세를 잘 설명 할 수 있는 것으로 분석되었고, 일반국도의 경우 ARIMA(2, 3, 0)모형이 추세를 설명할 수 있는 것으로 분석되었다. 이러한 모형은 장래 교통안전계획의 목표치를 수립하거나 평가하는데 근거자료로 활용될 수 있을 것으로 보인다.