• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.43 no.3
• /
• pp.176-182
• /
• 2007

Fishing power, which means performance of fishing vessel or catchability of fishing gear, can explain using by fishing power index(FPI) to compare fishery efficiency among uniformity types of fishery that work during the fixed period in specific fishing ground. This research analyzed on their fishing power and catchability using comparing each sampled vessels of coastal trap fishery for common octopus. The results showed that they were no difference in amount of used trap and immersed time etc. in CPUE among sampled vessels, and had no correlation of catch production due to vessel's tonnage. Most vessel's FPI estimates but 3 vessels were higher than the averaged, and showed similar fishing power in general. And then, CPUE and FPI showed that 4 to 5 tonnage vessels would be superior to another, 4 tonnage vessels had also good catchability. Therefore, we estimated that 4 tonnage vessels had the most efficiency work for coastal trap fishery for common octopus.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2006.05a
• /
• pp.308-309
• /
• 2006

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.42 no.3
• /
• pp.169-178
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by CFD(computational fluid dynamics). Also, the lift/drag and PIV(particle image velocimetry) tests of kites had been performed in our previous finding. For this situation, models of canvas kite were designed by solidworks(design program) for the CFD test using the same conditions as in the lift/drag tests. And we utilized FloWorks as a CFD analysis program. The results obtained from the above approach are summarized as follows: According to comparison of the measured and analyzed results from mechanical tests, PIV and CFD test, the results of all test were similar. The numerical results of lift-coefficient and drag-coefficient were 5-20% less than those of the tests when attack angle is $10^{\circ},\;20^{\circ}\;and\;30^{\circ}$. In particular, it showed the 20% discrepancy at $40^{\circ}$. The numerical results of the ratio of drag and lift were 8-13% less than those of the tests at $10^{\circ}$ and 10% less than those of the tests at $20^{\circ},\;30^{\circ}\;and\;40^{\circ}$. Pressure distribution gradually became stable at $10^{\circ}$. In particular, the rectangular and triangular types had the centre of the high pressure field towards the leading edge and the inverted triangular type had it towards the trailing edge. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The action point of dynamic pressure as a function of the attack angle was close to the rear area of the model with the small attack angle, and with large attack angle, the action point was close to the front part of the model.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.43 no.1
• /
• pp.25-32
• /
• 2010

A Sanitary survey in an Important shellfish-growing area of Biin Bay in Seocheon-gun Korea, was conducted to evaluate bay conditions and compliance with the bacteriological criteria for areas designated for the production of shellfish for export. Seawater samples were collected monthly at 55 sampling stations established in the survey area from January 2006 to December 2008. Bacteriological water quality did not change in response to a small rainfall (10.0 mm), but it increased abruptly in response to rainfall to 62.5 mm The most probable number (MPN) value for total coliforms and fecal coliforms in 1, 980 seawater samples ranged from <1.8 to >1, 600 MPN/100mL and from <1.8 to 330 MPN/100mL, respectively. The geometric mean and estimated $90^{th}$ percentile value for total coliforms ranged from 2.0 to 10.3 MPN/100mL and from 7.0 to 42.6 MPN/100mL respectively. The geometric mean and estimated percentile value for fecal coliforms ranged from 1.8 to 4.0 MPN/100mL and from 1.9 to 18.3 MPN/100mL, respectively. Accordingly, the bacteriological water quality of Biin Bay met the National Shellfish Sanitation Program (NSSP) and Korea Shel1fish Sanitation Program(KSSP) criteria for areas designated for shellfish production for export in Korea.

• Proceedings of the Korean Aquaculture Society Conference
• /
• 2006.05a
• /
• pp.200-201
• /
• 2006

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.41 no.5
• /
• pp.346-352
• /
• 2008

Yellow croaker (Larimichthys polyactis) is a major target species of large pair trawl fishery in the East China Sea. To standardize catch per unit effort (CPUE) of yellow croaker for the large pair trawl fishery, generalized linear model (GLM) was applied to evaluate and eliminate the influence of the explanatory factors (year, month, horse power and gross tonnage of vessel) on daily catches per boat collected and compiled by National Fisheries Research and Development Institute (NFRDI) from 1990 to 2007 at the fishery auction places of Busan, Masan and Incheon in Korea. Results of GLM showed that all of the factors significantly influenced on CPUE, explaining 36% of the total deviance. The standardized CPUE indicated that the abundance of yellow croaker in 2000's was 1.7 times higher than the CPUE in 1990's.

• Development and Reproduction
• /
• v.18 no.1
• /
• pp.33-41
• /
• 2014

We investigated the process of yolk absorption in Korean rose bitterling, Rhodeus uyekii, and determined the changes in its morphometric characteristics. The R. uyekii from 1 days post hatching (DPH) to 21 DPH, the eye diameter (ED) was 5.4 at 5 DPH. Thereafter, the ED/total length (TL) ratio increased to 10.7 at 21 DPH (p<0.05). The yolk length (YL) decreased from 95.4 to 1.1 by 21 DPH, and this rate of decrease was greater than that for any other dimension (p<0.05). 12 morphometric dimensions/TL for the R. uyekii were measured at each sampling day from 21 DPH to 170 DPH. At just hatching, the average TL and BW were $6.1{\pm}0.09mm$ and $4.9{\pm}0.07mg$, respectively. At 53 DPH, the average TL was $12.9{\pm}0.28mm$ and the average BW was $14.7{\pm}0.72mg$; the total length growth equation was $TL=5.507e^{0.038t}$ ($R^2=0.916$). Further, the body weight growth equation was $BW=3.3647e^{0.0296t}$ ($R^2=0.9354$). The dimensions with regard to body depth showed the greatest growth rates in the external characteristics of the fish (p<0.05). The patterns of the morphometric characteristics measured in this study can be classified in three ways. The patterns were shown to be increased (y=0.0992x+12.07, $R^2=0.8333$), decreased (y=-0.0569x+42.029, $R^2=0.8395$) or maintained (y=0.005x+18.263, $R^2=0.3678$) from 21 DPH to 170. These results will provide useful indices for the successful rearing of the R. uyekii.

• The Korean Journal of Malacology
• /
• v.23 no.2
• /
• pp.165-172
• /
• 2007

Gonadal development, reproductive cycle and sex ratio of the purplish Washington clam, Saxidomus purpuratus were investigated monthly by histological observations. Samples were collected from May 2006 to April 2007 in the Gangjin Bay of Namhea, Gyeongsangnam-do, Korea. The clams are dioecious. The gonads consist of a number of oogenic follicle and acinus. Monthly changes in the gonad index reached a maximum in April and a minimum in July. Monthly changes in the condition index reached a maximum in June and a minimum in November. The reproductive cycle of this species can be divided into five successive stages: the recovery and resting stage (June to December), early active stage (January to April), late active stage (February to July), ripe stage (March to October), spent stage (April to October). The main spawning of the clam occurred in July and September in Gangjin Bay. The sex ratio of female to male was not significantly different from 1:1.

• Journal of Aquaculture
• /
• v.20 no.3
• /
• pp.154-159
• /
• 2007

Manchurian trout (Brachymystax lenok) is an endangered fish species in East Asia including the Korean peninsula. To establish a method for artificial propagation and to improve our understanding of the reproduction in the species, we have produced recombinant gonadotropins, follicle-stimulating hormone (r-mtFSH) and luteinizing hormone (r-mtLH), which may play central roles in reproductive activities. In the present study, the biological activities of the recombinant hormones were analyzed by gonadosomatic index (GSI), ovarian follicle diameter, and sex steroid levels in mature rainbow trout (Oncorhynchus mykiss). In the 6th day post-injection, FSH-injected fish were slightly decreased in the GSI value, although there were no significant differences among those of control, r-mtFSH, and r-mtLH treatments. Injection of the r-mtFSH increased follicle diameters significantly as compared with those of control- and r-mtLH-injected fish. The plasma steroid levels showed wide differences in the groups at 1, 3, or 6th day post-injection. Despite the variable steroid levels, three individuals receiving either r-mtFSH or r-mtLH showed a great increase in a maturation-inducing steroid, $17{\alpha},20{beta}$-dihydroxy-4-pregnen-3-one, at 3 and 6 days. Taken together, these results suggest that biological efficacies of the recombinant FSH and LH should be further studied in the Manchurian trout.

• The Korean Journal of Malacology
• /
• v.21 no.2 s.34
• /
• pp.113-120
• /
• 2005

In this experiment of natural Atrina pectinata spat collection, the number of the pen shell spats settled on a collector were 4.2, 6.8, and 2.7 in the first, second, and third year, respectively. The highest number of pen shell spat settled on the collector was observed in August, and the shell length of juvenile pen shells grew up to 42.5 mm six months after setting. The relation between shell length (SL) and days (D) after setting could be expressed as; SL = 0.3854D + 0.8423 ($r^2$ = 0.9764). The spats developed the best in depth of 10-20 m. Spat collectors in mesh size of $1{\times}2mm$ mm were better for spats to survive than the ones in $1{\times}1mm$. The most efficient material as substrate for the settlement of pen shell spat was a polyethylene monofilament in the spat collectors.