• Journal of the Korean Wood Science and Technology
• /
• v.28 no.2
• /
• pp.57-65
• /
• 2000

Objective of research is obtain fundamental data of carbonized wood wastes for soil condition, de-ordorization, absorption of water, carrier for microbial activity, and purifying agent for water quality of river. The carbonization technique and the properties of carbonized wood wastes(wood-based materials) were analyzed. Proximate analysis showed the wood-based materials contains 0.37~2.27% ash, 70~74% volatile matter, and 17~20% fixed carbon. As carbonization temperature was increased, the charcoal yield was decreased. However, no difference in charcoal yield was found due to time increase. The specific gravity after the carbonization decreased about 30~40% comparing to green wood. The charcoal had 1.08~4.18% ash, 5.88~13.79% volatile matter, and 80.15~90.94% fixed carbon. The pH of plywood and particleboard(pH 9 at $400^{\circ}C$, pH 10 at $600^{\circ}C$ and $800^{\circ}C$) made charcoals was higher than that of fiberboard. The water-retention capacity was not affected by the carbonization temperature and time. The water-retention capacity within 24h was about 2~2.5 times of sample weight, and the Equilibrium moisture content(EMC) became 2~10% after 24h. EMC of charcoal from the thinned trees were 9.40~11.82%($20^{\circ}C$, RH 90%), 6.87~7.61%($20^{\circ}C$, RH 65%), and 1.69~2.81%($20^{\circ}C$, RH 25%). EMC of charcoal from the wood-based materials under $20^{\circ}C$, relative humidity(RH) 90% was similar to EMC of charcoal from the thinned trees(9~11 %). However, under $20^{\circ}C$, RH 25.65%, EMC of charcoal from the wood-based materials were higher(2~3%) than EMC of charcoal from the thinned trees. Every charcoal from the wood-based materials fulfilled the criteria in JWWA K 113-1947.

• Journal of the Korean Vacuum Society
• /
• v.20 no.6
• /
• pp.449-455
• /
• 2011

The luminescence properties of $In_{0.5}Ga_{0.5}As/In_{0.5}Al_{0.5}As$ multiple quantum wells (MQWs) grown on $In_{0.4}Al_{0.6}As$ buffer layer have been investigated by using photoluminescence (PL) and time-resolved PL measurements. A 1-${\mu}m$-thick $In_{0.4}Al_{0.6}As$ buffer layers were deposited at various temperatures from $320^{\circ}C$ to $580^{\circ}C$ on a 500-nm-thick GaAs layer, and then 1-${\mu}m$-thick $In_{0.5}Al_{0.5}As$ layers were deposited at $480^{\circ}C$, followed by the deposition of the InGaAs/InAlAs MQWs. In order to study the effects of $In_{0.4}Al_{0.6}As$ layer on the optical properties of the MQWs, four different temperature sequences are used for the growth of $In_{0.4}Al_{0.6}As$ buffer layer. The MQWs consist of three $In_{0.5}Al_{0.5}As$ wells with different well thicknesses (2.5-nm, 4.0-nm, and 6.0-nm-thick) and 10-nm-thick $In_{0.5}Al_{0.5}As$ barriers. The PL peaks from 4-nm QW and 6-nm QW were observed. However, for the MQWs on the $In_{0.4}Al_{0.6}As$ layer grown by using the largest growth temperature variation (320-$580^{\circ}C$), the PL spectrum only showed a PL peak from 6-nm QW. The carrier decay times in the 4-nm QW and 6-nm QW were measured from the emission wavelength dependence of PL decay. These results indicated that the growth temperatures of $In_{0.4}Al_{0.6}As$ layer affect the optical properties of the MQWs.

• Journal of agriculture & life science
• /
• v.43 no.5
• /
• pp.17-25
• /
• 2009

The purpose of this study was to find out the optimum germination temperature and dehydration period at SMP processing, and applies 3 kind of seed treatment and compares yield with stand establishment of seeds of 12 pepper cultivars. It was showed that all 12 cultivars of nontreated seed does not entirely germinated in $15^{\circ}C$. It was that SMP seed germination rate 77(Yeomyeong)~100% (Deawang) high, and seeds 12 cultivars was tendency high by more than 93% at all temperatures excepting Bugang($35^{\circ}C$, 85%) and Yeomyeong($15^{\circ}C$, 77%). Dehydration condition of result were Gumsure, Dongbang Jonggagip, Hyangchon, Yeomyeong, Kwangbok, Wang by which 3 hours in $45^{\circ}C$ were proper, which 6 hours in $35^{\circ}C$ were proper Manitta, Joyang, and judged that 12 hours in $25^{\circ}C$ were proper in Bugang, Dabotap, Deawang. It was reported that water percentage of moisture content change of pepper seed by dehydration was difference a little in species, but was judged by 3-6 hours in $45^{\circ}C$. There was compared to SMP, Osmopriming, pH control by stand establishment were shown pH control of Hyangchon, Dabotap species was nontreated, osmopriming treatment. Also, Kwangbok species was tendency that stand establishment was low, and Deawang was good than other species. Yield of nontreated of yield day was tendency, and miss planted rate also appeared high for 90 day. There was difference in species, and processing of pH control and osmopriming was not shown stand establishment that is stabilized in all species. SMP processing condition could bring security of stable stand establishment in all species, and was considered that research that was under various environment condition should be proceeded conclusively.

• Journal of Navigation and Port Research
• /
• v.42 no.6
• /
• pp.507-517
• /
• 2018

The probability of T/S cargo volume to decrease is the most notable problem associated with inappropriate mix of terminal operators in Busan port. Other problems include, the deterioration of the national carriers' competitiveness from non-operation of own terminal, excessively high proportion of financial operators in the engagement of operation which may result in their passiveness in timely investment, additional cost burden to carriers' in the handling inter-terminal T/S cargo transportation and inefficiency in terminal operation by the multiplicity of operators proved to be same recognized as so through the analysis. Therefore, in order to provide solutions for the problems and to strengthen Busan port's competitiveness, this research suggests the restructuring of operators mix as follows. To achieve sustainable growth of T/S cargo, global carriers' participation in terminal operation should be of utmost priority. To enhance the operational efficiency, the operators should be integrated. Similarly, the integration of operators will play a key role in verifying that national carriers' own terminal operation is an important factor in raising its competence. Finally, BPA's active engagement in the entire operation of port is also critical in public-oriented operation of the port. Whereas in the interactive analysis by taking the merits of Busan port into consideraion, global carrier's participation in operation, integration of operators and BPA's engagement in operation proved to contribute to the increase of T/S cargo and strengthening of operational efficiencies of Busan port.

• The Korean Journal of Physiology
• /
• v.1 no.1
• /
• pp.33-41
• /
• 1967

The metabolic patterns of C-1 and C-6-carbon atoms of glucose were observed in the tissue homogenates of the Ehrlich ascites tumor tissue which was incubated for 3 hours in the Dubnuff metabolic shaking incubator. $C^{14}-1-and\;C^{14}-6-glucose$ were used as tracers. The glucose media in which tissue homogenate was incubated was kept at a concentration of 200mg% glucose of carrier and appropriate amount of $C^{14}-1-or\;C^{14}-6-tracer$. At the end of 3 hour incubation, respiratory $CO_2$ samples trapped by alkaline which is placed in the tenter well of incubation flask were analyzed for the total $CO_2$ production rates and their radioactivities. The tissue homogenate samples after incubation were analyzed for their concentrations of glucose, lactate, pyruvate and glycogen and calculations were made on the glucose consumption rate, pyruvate and lactate accumulation rates. The following results were obtained. Data obtained in each group are as follows: 1. In the tissue homogenate, which was incubated with $C^{14}-1-glucose as a substrate, total $CO_2$ production rate averaged $19.0{\pm}5.0{\mu}M/hr/gm$ and the mean specific activity of respiratory $CO_2$ was $840{\pm}296\;cpm/mgC.$ Relative specific activity (RSA) which means the fraction of $CO_2$ derived from medium $C^{14}-1-glucose$ to total $CO_2$ production rate was calculated by ratio of SA of respiratory $CO_2$ and medium $C^{14}-1-glucose.$ RSA was $14.3{\pm}5.0%,$ Accordingly actual $CO_2$ production rate from medium $C^{14}-1-glucose$ showed a mean value of $2.79{\pm}1.35\;{\mu}m$ of which amount was equivalent to the mean value of total glucose consumption rate $(RGDco_2)$, namely, $5.1{\pm}1.3%.$ Lactate and pyruvate appearance rates averaged $7.13{\pm}1.26\;and\;0.21{\pm}0.02{\mu}M/hr/gm,$ respectively. Assuming that these 3 carbon compounds appeared in the medium were derived from glucose, calculations were made that relative glucose disappearance rate into lactate $(RGD_L)$ was $38.0{\pm}5.4%\;and\;RGD_P$ was $1.23{\pm}0.03%.$ Therefore, about 43.3% of the total glucose consumed were accounted for by conversion into the respiratory $CO_2$, lactate and pyruvate. 2. In the second group, which was incubated with $C^{14}-1-glucose$ as a substrate, glucose consumption rate, lactate and pyruvate appearance rates showed almost the same order as the values of the $C^{14}-1-glucose$ substrate group. However, RSA was remarkably decreased showing a mean value of $1.02{\pm}0.13%.$ This fact means that the C-6 carbon of glucose take the minor part in the oxidative metabolism of glucose. The glycogen level in both substrate tissue homogenate showed less than 0.3% of tissue weight. These low value suggested that there was an inhibition of carbohydrate synthesis in the Ehrlich ascites tumor tissue. 3. The catabolic pathway of glucose in the tumor tissue were analyzed on the basis of Bloom's principle from the values of RSA. It was found that in the tumor tissue more than 90% of $CO_2$ derived from glucose were oxidized via the alternate pathway other than principal EMP-TCA cycle such as hexose monophosphate pathway (HMP). From the data described above, it was assumed that in the Ehrlich tumor tissue anaerobic glycolysis proceeds normally although, the oxidation of products of anaerobic glycolysis via the TCA cycle is inhibited resulting in the accumulation of lactate and almost all of oxidative energy from glucose is released by oxidative pathway such as HMP.

• The Korean Journal of Air & Space Law and Policy
• /
• v.27 no.1
• /
• pp.75-101
• /
• 2012

As the Reublic of Korea revised the Commercial Code including 40 articles of air transport enacted newly on May 23, 2011, so Korea became first legislative examples in the Commercial Code of the developed and developing countries. I would like to explain briefly the main contents of my paper such as (1) history of enacting newly Part VI (air transport) in the Korea's revised commercial law, (2) legal background enacting newly Part VI (air transport) in the Korea's revised commercial law and the problems on the conditions of air transport, (3) every countries' legislative examples on the civil liability of aircraft's operator, (4) unlawful Interference Convention and general risk convention of 2009, (5) main contents and prospects of the revised Commercial Code for the liability of aircraft's operator etc as the followings. Meanwhile as the Aviation Act, Commercial Code and Civil Code in Korea and Japan did not regulated at all the legal basis of solution on the disputes between victims and offender for the amount of compensation for damage due to personal or property damage caused by aircraft accidents in Korea and Japan, so it has been raised many legal problems such as protection of victims, standard of decision in trial in the event of aircraft accident's lawsuit case. But the Korean Revised Commercial Code including Part VI, air transport regulations was passed by the majority resolution of the Korean National Assembly on April 29, 2011 and then the South Korean government proclaimed it on May 23 same year. The Revised Commercial Code enforced into tothe territory of the South Korea from November 24, 2011 after six month of the proclaimed date by the Korean Government. Thus, though Korean Commercial Code regulated concretely and respectively the legal relations on the liability of compensation for damage in the contract of transport by land in it's Part II (commercial activities) and in the contract of transport by sea in its Part V (marine commerce), but the Amended Commercial Act regulated newly 40 articles in it's Part VI (air transport) relating to the air carrier's contract liability on the compensation for damage caused by aircraft accidents in the air passengers and goods transport and aircraft operator's tort liability on compensation for damage caused by the sudden falling or collision of aircraft to third parties on the surface and so it was equipped with reasonable and unified system among the transport by land, marine and air. The ICAO adopted two new air law conventions setting out international compensation and liability rules for damage caused by aircraft to third parties at a diplomatic conference hosted by it from April 20 to May 2, 2009. The fight against the effects of terrorism and the improvement of the status of victims in the event of damage to third parties that may result either from acts of unlawful interference involving aircraft or caused by ordinary operation of aircraft, forms the cornerstone of the two conventions. One legal instrument adopted by the Conference is "the Convention on Compensation for Damage to Third Parties, Resulting from Acts of Unlawful Interference Involving Aircraft" (Unlawful Interference Convention). The other instrument, "the Convention on Compensation for Damage Caused by Aircraft to Third Parties" (General Risk Convention), modernizes the current legal framework provided for under the 1952 Rome Convention and related Protocol of 1978. It is desirable for us to ratify quickly the abovementioned two conventions such as Unlawful Interference Convention and General Risk Convention in order to settle reasonably and justly as well as the protection of the South Korean peoples.

• The Korean Journal of Air & Space Law and Policy
• /
• v.30 no.1
• /
• pp.3-29
• /
• 2015

In case of C-410/11, Pedro Espada $S\acute{a}nchez$ and Others v Iberia $L\acute{i}neas$ $A\acute{e}reas$ de $Espa\tilde{n}a$ SA., ECLI:EU:C:2012:747, the passengers of a flight between Barcelona and Paris, whose baggage had been lost, lodged a claim before a Spanish court, asking for compensation. More specifically, the claimants were a family of four (two adults and two children), and had stored all their personal items in two suitcases, which had been checked in and tagged but never returned to the passengers in question. The four claimants relied on the Montreal Convention, ratified by the EU, which provides that each passenger can claim up to 1,000 SDRs in compensation (i.e. ${\euro}1,100$) in case his or her baggage is lost; thus, they sought to recover ${\euro}4,400$ (4,000 SDRs, i.e. 1,000 SDRs x4). The preliminary reference issue raised by the Spanish court to the CJEU regarded the $Montr\acute{e}al$ Convention's correct interpretation; in particular, it asked whether compensation should be available only to passengers whose lost baggage had been checked in "in their own name" or whether it is also available to passengers whose personal items had been stored in the (lost) baggage of a different passenger. The CJEU held that compensation had to be granted to all passengers whose items had been lost, regardless of whether these had been stored in baggage checked in "in their own name." In fact, it maintained that the real aim of the $Montr\acute{e}al$ convention is to provide passenger-consumers with protection for the loss of their personal belongings, so the circumstance of where these were being carried is not relevant. Nevertheless, the CJEU clarified that it is for national courts to assess the evidence regarding the actual loss of an item stored in another passenger's baggage, and maintained that the fact that a group of people were travelling together as a family is a factor that may be taken into account.

• The Journal of Korean Academy of Prosthodontics
• /
• v.49 no.3
• /
• pp.254-262
• /
• 2011

Purpose: This study aims to evaluate and prospect for current research trend and developmental perspectives via analyzing recent biomaterial coated-implants study. Materials and methods: To investigate each subject respectively, several biomaterials that are using for implant surface coating were set as 'keywords'. By these keywords, major research groups in each subject were chosen, and research trend of them was analyzed. Trend of In vivo studies that examined selected biomaterials were analyzed to evaluate commercial potential. Results: The collagen research accounted for 40% of total implant study, which was the highest, and fibronectin, BMPs (bone morphogenetic proteins) and RGD (Arg-Gly-Asp) peptides followed, which were ranked in descending order. Furthermore, figures of all four research subjects were also increased with time, especially a sharp increase in RGD research. According to the results of major research group, collagen that was combined with other organic and inorganic biomaterials was mostly examined, rather than using collagen only. Major research groups investigating BMPs mostly focused on rhBMP-2. In animal studies, collagen was used as resorbable membrane in guided bone regeneration (GBR) or drug carrier, while BMPs were used with bone graft materials or coating material for titanium implant surface. Conclusion: There is not consistency of results even in identical subjects research field. Many studies are ongoing to optimize combination between mechanical surface treatment and biomaterials such as extracellular matrix component and growth factors.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Clean Technology
• /
• v.23 no.3
• /
• pp.286-293
• /
• 2017

The goal of this paper was to improve the performance of the adsorbent to remove $H_2S$. Pellet type adsorbents were prepared by using four kinds of materials ($Fe_2O_3$, $Ca(OH)_2$, Activated carbon, $Al(OH)_2)$ for use as a basic carrier. As the results of $H_2S$ adsorption tests, $Fe_2O_3$ and Activated Carbon improved the adsorption performance of $H_2S$ by 1.5 ~ 2 times, and $Ca(OH)_2$ and $Al(OH)_2$ showed no effect on $H_2S$ adsorption performance. Four basic materials were as carriers, and 5 wt% of KI, KOH and $K_2CO_3$ were added on the carriers, respectively. As the results of $H_2S$ adsorption tests, adsorbent containing $K_2CO_3$ showed the best performance. As a result of $H_2S$ adsorption test with varying $K_2CO_3$ content from 5 to 30 wt%, it was confirmed that adsorption performance was increased up to 20 wt% of $K_2CO_3$ and adsorption performance decreased to 30 wt%. The $H_2S$ adsorption performance was modeled by using Thomas model with varying $K_2CO_3$ contents and the results were used for the adsorption tower design. It was shown that the experimental values and the simulated values were in good agreement with the contents range of $K_2CO_3$ up to 20 wt%. Based on these results, it is expected that not only the adsorption performance of $H_2S$ adsorbent is improved but also life time of the adsorbent is increased.