• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.36T no.1
• /
• pp.86-92
• /
• 1999

This paper proposed a small type ofen-loop antenna model for the moisture sensor, and its operating characteristics were analyzed numerically using the moment methods. The numerical analysis results through the moment methods showed that this antenna was able to match the input impedance to 50$\Omega$ by changing parameters of the antenna in the frequency range from 300MHz to 500MHz. The gain of antenna was obtained about 2.5dBd. This antenna proposed in this paper showed not only the radiation pattern characteristics of the uniform distribution toward the axial direction above the antenna, but also the narrowband resonant characteristics. Thus we can propose that the antenna be more suitable for the moisture sensor.

• The Journal of the Acoustical Society of Korea
• /
• v.18 no.7
• /
• pp.80-84
• /
• 1999

In this paper, the split model analysis algorithm, which can generate the wideband speech signal from the spectral information of narrowband signal, is developed. The split model analysis algorithm deals with the separation of the 10/sup th/ order LPC model into five cascade-connected 2/sup nd/ order model. The use of the less complex 2/sup nd/ order models allows for the exclusion of the complicated nonlinear relationships between model parameters and all the poles of the LPC model. The relationships between the model parameters and its corresponding analog poles is proved and applied to each 2/sup nd/ order model. The wideband speech signal is obtained by changing only the sampling rate.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.860-872
• /
• 2013

In this paper, reasonable and effective building strategies of PPDR network is presented through investigating and analysing current policies for PPDR network of Korea and foreign countries. The research result shows that it is necessary PPDR network is designed and implemented considering currently transient status in aspects of PPDR-related technical roadmaps and existing PPDR networks. Also, in the transient period of more than 5 years, mobile broadband- based private PPDR network should be builded and it should be complemented by some commercial networks such as TRS or other mobile broadband networks.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.42-50
• /
• 2014

Orthogonal frequency division multiplexing (OFDM) is a modulation technique that allows the transmission of high data rates over wideband radio channels subject to frequency selective fading by dividing the data into several narrowband and flat fading channels. OFDM has high spectral efficiency and channel robustness. However, a major drawback of OFDM is that the peak-to-average power ratio (PAPR) of the transmitted signals is high, which causes nonlinear distortion in the received data and reduces the efficiency of the high power amplifier in the transmitter. The most straightforward method to solve this problem is to use a nonlinear mapping algorithm to transform the signal into a new signal that has a smaller PAPR. One of the latest nonlinear methods proposed to reduce the PAPR is the $L_2$-by-3 algorithm, which is based on the discrete sliding norm transform. In this paper, a new algorithm based on the $L_2$-by-3 method is proposed. The proposed method is very simple and has a low complexity analysis. Simulation results show that the proposed method performs better, has better power spectral density, and is less sensitive to the modulation type and number of subcarriers than $L_2$-by-3.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.21 no.8
• /
• pp.1332-1338
• /
• 1997

In the case of the transfer function for the secondary path is dependent on time, the on-line method which can model it is continuously must be applied to the active noise control technique. And the adaptive random noise technique among the on-line methods is effective in the narrow-band control. In this method, the signal to noise ratio between random noise for modeling and primary noise is low. Therefore, the estimations of transfer function will be prone to inaccuracies and the convergence time will be too long. Such imperfections will have an influence upon the performance of an active noise controller. In this study, t enhance the signal to noise ratio, the on-line method that is combined the conventional adaptive random noise technique and the adaptive line enhancer, is proposed. By using proposed on-line method, a rigorous system identification and control of primary noise have been implemented.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.459-462
• /
• 2004

간섭신호가 광대역이거나 빠르게 기동할 경우 기존의 협대역 적응 빔형성(NABF: Narrowband Adaptive Beam-forming)기법의 성능이 크게 저하되는 것으로 알려져 있다. 이는 간섭신호가 빠르게 기동할 경우 추정된 빔패턴의 널(null)을 벗어나게 되고 협대역을 가정하여 얻어진 빔패턴의 널은 광대역 신호일 경우 이를 효과적으로 제거할 수 없기 때문이다. 이러한 환경에서 견실한 성능을 얻기 위해 NABF 기법에 미분제한조건을 주어 간섭신호 방향의 널 폭을 넓히는 기법이 알려져 있다. 본 논문에서는 광대역의 기동하는 간섭신호에 보다 견실하게 대처하기 위해 광대역 적응 빔형성 (WABF: Wideband Adaptive Beamforming)기법에 미분제한 조건을 적용하였다. 그리고 빠르게 기동하는 광대역 간섭신호가 존재하는 환경에서 모의실험을 수행하여 제안한 기법과 기존의 NABF기법 성능을 비교한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.3
• /
• pp.195-207
• /
• 2017

Recently, the SAR-GMTI mode is becoming increasingly essential in airborne radar systems. While SAR requires wideband waveforms for high resolution imaging, GMTI requires narrowband waveforms for doppler processing, which makes general LFM waveforms difficult to use for SAR-GMTI. This paper analyses the FJB(Frequency Jump Burst) waveform, which is studied for the SAR-GMTI waveform, and presents the method for the pulse compression and SAR image formation using FJB waveforms. Simulation results show that there is little difference in performances between the FJB waveform and the LFM waveform.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.16 no.11
• /
• pp.1054-1062
• /
• 1991

In this paper a communication system using direct sequence spread spectrum (DS/SS) technique is constructed to transmit burst format data over power line channel with impulsive noise and narrowband interferences. Fast code synchronization is acquired by digital matched filter and data decision is accomplished by sampling pulses. In order to examine the performance of the power line communication system, but error rate and packet loss rate are measured over the simulation channel with various noise sources. When the packet composed of 1-bit preamble and 63-bit data is transmitted under very high burst impulsive noise, the bit error rate is about 10$^3$-10$^4$ and the packet loss rate is below 0.07.

• Journal of Electrical Engineering and Technology
• /
• v.8 no.6
• /
• pp.1468-1473
• /
• 2013

This paper dealt with the propagation characteristics of acoustic signals produced by partial discharges and the positioning of PD origin in insulation oil to develop insulation diagnostic techniques of oil-immerged transformers. Electrode systems such as needle to plane, plane to plane, and particle electrodes were fabricated to simulate some defects of power transformers. In addition, the frequency spectrum and propagation characteristics of acoustic signals with partial discharge (PD) in insulation oil were analyzed. Although there were differences based on the type of defect, the frequency spectra of the acoustic signals measured by wide and narrow band acoustic emission (AE) sensors were distributed in the range of 50 kHz-400 kHz. Therefore, a narrowband AE sensor is suitable for the diagnosis of oil-immersed power transformers. We could find the position of the PD source with an error margin of 10% in the experiments by calculating the position of the PD occurrence using the time difference of arrival measured by five AE sensors.

• Wind and Structures
• /
• v.30 no.6
• /
• pp.597-616
• /
• 2020

The blockage effect on the aerodynamic characteristics of tall buildings is a fundamental issue in wind tunnel test but has rarely been addressed. To evaluate the blockage effects on the aerodynamic forces on a square tall building and flow field peripherally, large eddy simulations (LES) were performed on a 3D square cylinder with an aspect ratio of 6:1 under the uniform smooth inflow and turbulent atmospheric boundary layer (ABL) inflow generated by the narrowband synthesis random flow generator (NSRFG). First, a basic case at a blockage ratio (BR) of 0.8% was conducted to validate the adopted numerical methodology. Subsequently, simulations were systematically performed at 6 different BRs. The simulation results were compared in detail to illustrate the differences induced by the blockage, and the mechanism of the blockage effects under turbulent inflow was emphatically analysed. The results reveal that the pressure coefficients, the aerodynamic forces, and the Strouhal number increase monotonically with BRs. Additionally, the increase of BR leads to more coherence of the turbulent structures and the higher intensity of the vortices in the vicinity of the building. Moreover, the blockage effects on the aerodynamic forces and flow field are more significant under smooth inflow than those under turbulent inflow.