• 한국전기전자재료학회논문지
• /
• 제35권2호
• /
• pp.165-171
• /
• 2022

The SiO₂/TiO₂ multilayer thin films used for narrow band pass filter were fabricated using E-beam evaporation method. The narrow band pass filter was used to enhance the resolution of spectroscopy and sensor applications with near infrared (NIR) light source. The narrow band pass filter with multilayer thin films were designed with Essential Macleod program. The multilayers of SiO₂/TiO₂ with 32 layers were deposited on the silicon encapsulation of IR with peak wavelength (λ_p) of 660 nm and NIR LEDs with λ_p of 830 nm, 880 nm, and 955 nm. After NIR light passed through the narrow band pass filter, the full width of half maximum of 33.4~48.6 nm became narrow to 20~24 nm owing to the absorption of photons with short or long wavelength of designed band of 20 nm. The SiO₂/TiO₂ band pass filter fabricated in this study can be used for sensor, optoelectronics, and NIR spectroscopy applications.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1984년도 춘계학술발표회논문집
• /
• pp.25-28
• /
• 1984

This paper describes the design of band-pass filter using the dielectric resonator and microstrip line depends mainly upon the magnetic field and is principal parameter as band-pass filter. Because dielectric resonator band~pass filter has a very high-Q, the bandwidth of this filter is very narrow. as a result of experiment, the dielectric resonator bandwidth of this filter is very narrow. As a result of experiment, the dielectric resonator band-pase filter has various modes central frequencies due to the mode change and good characteristric as a band-pass filter.

• 전자공학회논문지D
• /
• 제35D권8호
• /
• pp.82-88
• /
• 1998

We propose and design a new type of anrrow band-pass optical filter based on two fiber gratings with different reflection wavelength. The ripples occur in the spectra of the filter with two uniform fiber gratings. Our simulation results also show that the ripples disappear with the fiber gratings apodized to both gaussian and hyperbolic tangent function. The hyperbolic tangent function seems to be a better apodization function for improving the filter's performance in terms of narrow pass bandwidth and high transmission.

• ETRI Journal
• /
• 제27권5호
• /
• pp.643-646
• /
• 2005

This letter proposes a band-pass filter (BPF) with two transmission zeros based on a combination of parallel coupling and end coupling of half-wave transmission lines. The fabricated BPF exhibited a narrow bandwidth and two transmission zeros near the pass-band due to the end-coupled and shielding waveguide. At the center operation frequency of 60 GHz, the 20 dB bandwidth of the BPF is 1.0 GHz, which is almost 2% of the center operation frequency, and the insertion loss is 3.12 dB. Two transmission zeros reach approximately 40 dB at 58.5 and 62.5 GHz. The simulation results almost agree with the measured results.

• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2006년도 제5회 추계학술대회 및 정기총회
• /
• pp.175-178
• /
• 2006

• 한국광학회지
• /
• 제14권3호
• /
• pp.331-337
• /
• 2003

본 연구는 이중 이온빔 스퍼터링 증착법으로 제작한 채널 간격 50 ㎓ 광통신용 협대역 투과 필터에 관한 연구이다. Ta$_2$ $O_{5}$ 단층박막의 특성 분석을 통해 공정 조건을 최적화 하였으며, DPS 필터 예비 증착을 통해 0.1 nm 이하의 박막두께 균일성을 확보하였다. 1/4 파장 광학박막 두께를 기본으로 하여 총 216층으로 구성되고 4개의 간격층을 갖는 채널 간격 50 ㎓ 협대역 투과 필터를 설계하였고, 파장 가변 레이저를 사용한 비접촉 광학 두께 제어 시스템을 사용하여 증착하였다. 박막 증착시 발생하는 스트레스를 줄이기 위하여 열팽창 계수가 큰 유리 기판을 사용하였으며, 비접촉 광학 두께 제어 시스템의 오차를 줄이기 위하여 협대역 투과 필터의 제작에 앞서 기판의 뒷면에 무반사 증착을 수행하였다. 이렇게 제작된 채널 간격이 50 ㎓인 협대역 투과 필터의 광학 특성은 삽입 손실이 0.40 ㏈, 잔물결이 0.20 ㏈이며,-0.5 ㏈와 -25 ㏈에서의 투과 대역폭이 각각 0.20 nm, 0.60 nm로 광통신에서 사용되는 사양을 만족하였다.하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권2호
• /
• pp.939-951
• /
• 2019

A novel empirical mode decomposition strategy based on Fourier transform and band-pass filter techniques, contributing to efficient instantaneous vibration analyses, is developed in this study. Two key improvements are proposed. The first is associated with the adoption of a band-pass filter technique for intrinsic mode function sifting. The primary characteristic of decomposed components is that their bandwidths do not overlap in the frequency domain. The second improvement concerns an attempt to design narrowband constraints as the essential requirements for intrinsic mode function to make it physically meaningful. Because all decomposed components are generated with respect to their intrinsic narrow bandwidth and strict sifting from high to low frequencies successively, they are orthogonal to each other and are thus suitable for an instantaneous frequency analysis. The direct Hilbert spectrum is employed to illustrate the instantaneous time-frequency-energy distribution. Commendable agreement between the illustrations of the proposed direct Hilbert spectrum and the traditional Fourier spectrum was observed. This method provides robust identifications of vibration modes embedded in vibration processes, deemed to be an efficient means to obtain valuable instantaneous information.

• 한국전자파학회논문지
• /
• 제18권7호
• /
• pp.704-709
• /
• 2007

본 논문에서는 UWB 시스템에 적용하기 위한 CPW 대역 통과 여파기를 제안하였다. 제안된 여파기는 특성 임피던스 $50{\Omega}$을 갖는 전송 선로에 슬롯만을 형성하여 대역 통과 특성을 갖도록 구현하였다. 설계된 대역 통과 여파기는 무선 랜 주파수 대역에서의 협대역 저지 특성을 얻기 위해 CPW 접지면에 두 쌍의 반파장 슬롯 공진기를 이용한 대역 저지 여파기와 결합하였다. 제작된 대역 통과 여파기는 $15.35{\times}13.60mm$의 작은 크기로 주파수 통과 대역은 3-dB 삽입 손실을 기준으로 $2.8{\sim}9.8GHz$이며 $5.15{\sim}5.71GHz$의 협대역 저지 대역을 갖는다. 또한, 군 지연 특성은 저지대역을 제외한 통과 대역 내에서 400 psec 이하를 나타낸다.

• 한국ITS학회 논문지
• /
• 제12권6호
• /
• pp.37-43
• /
• 2013

본 논문에서는 SIR(Stepped Impedance Resonator) 구조를 이용한 초광대역(UWB:Ultra Wide Band) 개방형 스터브 대역통과 여파기를 제안한다. 제안한 개방형 스터브 대역통과 여파기는 초광대역을 구현하기 위해 스터브 위치에 SIR 구조를 적용하였으며 낮은 삽입손실을 갖는다. 제안된 대역통과 여파기의 대역폭은 중심 주파수 5.8GHz에서 103% 이고, 삽입 및 반사손실은 각각 0.17dB 및 13.1dB이며 전체의 크기는$21.6{\times}17.8mm^2$ 이다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.163-166
• /
• 2005

Multilayer LTCC technology enables RF modules to be reduced dramatically by taking advantage of the three dimension flexibility. Compared to a conventional two dimensional PCB, LTCC allows higher density, reduced size, and lower cost. In this research, BPF based on LTCC for 900MHz ZigBee application was implemented which can replace SAW filter with using the material of the Dupont9599's dielectric constant 7.8. And distributed baud pass filter for 900MHz ZigBee system applications is presented. Using resonator stripline and capacitance, 2nd order band pass filter was designed. Adjusting resonator's length and capacitance is easy to tune at accurate center frequency by shifting band because ZigBee system is using narrow bandwidth, $902MHz^{\sim}928MHz$. Also resonator has no limitation in space, so reducing size is possibile. Designed filter had I.L. 2.8dB at 915MHz and attenuation at 815MHz, 1015MHz was 16dB, 15dB, respectively. Therefore, the sharpe cut-off and good insertion loss for ZigBee system application.