• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.8
• /
• pp.1472-1477
• /
• 2007

Users are offered by the multimedia service of various information on current information-oriented society. The digitize became essential that process of various data is not to selected. Also, Filter technology is required to use the lacking frequency resources efficiently. This paper designs FIR digital band-pass filter of the voice band by narrow band pass filter md verify the characteristics of filter to use by the DSP practice SET.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.8 no.4
• /
• pp.25-30
• /
• 1971

Fabrication and measurements of the magnetically tunable YIG band pass or stop filter at X-band are discussed. Using two YIG spheres located at the region of r-f circularly polarized magnetic field between the strip lines, the pass or stop characteristics of the filter are obtained. In the case of band stop, the output level is typically 25db lower than the input power. Contrarily for the pass band, the pass band level is 22db higher than the stop frequency region. The experimental results are in good agreement with the theoretical values of FMR. Further it is shown that the structure can be used for a directional coupler.

• The Optical Journal
• /
• s.113
• /
• pp.54-56
• /
• 2008

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.48 no.3
• /
• pp.68-73
• /
• 2011

In this paper, a compact-narrow open stub band-pass filter with parasitic-signal of low frequency range and second harmonics rejected using the parallel coupled line and FLCLM(Frquency Locked Controlled Length Method) is proposed. The characteristic of the parallel coupled line can be rejection for parasitic-signal of low frequency range and second harmonics. In last filter of experimental results show that insertion loss is 1.2 dB and return loss is 14.8 dB, and the fractional bandwidth is 10 % at the center frequency of 5.8 GHz. In additional, the rejection for parasitic-signal of low frequency range and second harmonics are 28.9 dB and 28.8 dB, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.6
• /
• pp.84-90
• /
• 2011

In this paper, a dual-band pseudo-combline narrow bandpass filter is proposed. The proposed bandpass filter adopts the open resonant stubs and the proposed bandpass filter can be used for ITS(Intelligent Transport System) and X-band satellite systems application. The proposed bandpass filter has the insertion and return losses of 1.72 dB and 15.5 dB at the bandwidth of 3.6 % and center frequency of 5.8 GHz, respectively. Also, the second operating frequency band for insertion and return losses are 1.92 dB and 16.3 dB at the bandwidth of 3% and center frequency of 8.5 GHz, respectively.

• Current Optics and Photonics
• /
• v.2 no.6
• /
• pp.563-567
• /
• 2018

We propose and experimentally demonstrate a simple tunable photonic microwave band-pass filter with high resolution using a reflective semiconductor optical amplifier (RSOA) and an optical time-delay line. The RSOA is used as a gain medium for generating cross-gain modulation (XGM) effect as well as an optical source. The optical source provides narrow spectral width by self-injection locking the RSOA in conjunction with a partial reflection filter with specific center wavelength. Then, when the RSOA is operated in the saturation region and the modulated recursive signal is injected into the RSOA, the recursive signal is inversely copied to the injection locked optical source due to the XGM effect. Also, the tunability of the passband of the proposed microwave filter is shown by controlling an optical time-delay line in a recursive loop.

• 한국ITS학회:학술대회논문집
• /
• 2005.11a
• /
• pp.263-266
• /
• 2005

• Proceedings of the Optical Society of Korea Conference
• /
• 2008.07a
• /
• pp.207-208
• /
• 2008

In this study, we present the error compensation effect of optical monitoring methods for apply of narrow band pass filter and IR-cutoff filter. Then we show the optimization process for apply of optical monitoring methods.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.4
• /
• pp.38-42
• /
• 2010

In this paper, a design method of the compact narrow band filter on the microstrip board is proposed using slot-type split spiral resonators. The design technique of this filter is based on cascading filter stages consisting of the combination of slot-type split spiral resonators, capacitive gaps between patches, and inductive grounded stubs with the meander configuration. By these means, it was possible to get the nearly symmetric frequency responses, adjustable bandwidths, compact sizes. And also excellent characteristic of the out-of-band rejection is achieved in contrast to the conventional filter design technique. The measured insertion loss shows good results about -3.47dB at the center frequency($f_0$=1GHz) and passband return loss is less than -12.62dB. The 3dB fractional bandwidth(FBW) is approximately 7.3%. The results of the frequency response measured on the fabricated band pass filter substrate show satisfactory agreement with the simulated frequency responses by the MWS(Microwave Studio) of CST in the region of interest.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.918-923
• /
• 2009

In this paper, a design method of the compact narrow band filter on the microstrip board is proposed using complementary split-ring resonators(CSRRs). The design technique of this filter is based on cascading filter stages consisting of the combination of circular CSRRs, capacitive gaps between patches, and inductive grounded stubs with the meander configuration. By these means, it was possible to get the nearly symmetric frequency responses, adjustable bandwidths, compact sizes. And also excellent characteristic of the out-of-band rejection is achieved in contrast to the conventional filter design technique. The measured insertion shows good results about -4.0dB at the center frequency($f_0=1GHz$) and passband return loss is less than -9.4dB. The 3dB fractional bandwidth(FBW) is approximately 4%. The results of the frequency response measured on the fabricated band pass filter substrate show satisfactory agreement with the simulated frequency responses by the HFSS in the region of interest.