• 한국입자에어로졸학회지
• /
• 제12권3호
• /
• pp.65-72
• /
• 2016

Nanoporous $SiO_2$ particles containing different pore volume and size were prepared from silicic acid by a spray pyrolysis. The pore size, pore volume and particle size could be controlled with varying the precursor concentration, reaction temperature, and amount of organic templates such as Urea and poly ethylene glycol (PEG). The pore size distribution, pore volume and specific surface area of as-prepared particles were analyzed by BET and BJH methods, and the average particle sizes were measured by a laser diffraction method. The nanoporous $SiO_2$ particles ranged $0.6-0.9{\mu}m$ in diameter were successfully synthesized and the average particle size increased as the silicic acid concentration increased. The morphology of nanoporous $SiO_2$ particles was spherical and pores ranged 1 - 40 nm in diameter were measured in the particles. In case of Urea added into silicic acid, it showed no much difference in the morphology, pore size and pore volume at different Urea concentration. On the other hand, when PEG was added, it was clearly observed that pore diameter and pore volume of the particles surface increased with respect to PEG concentration.

• 한국세라믹학회지
• /
• 제41권1호
• /
• pp.81-85
• /
• 2004

점토를 이용한 나노 다공성 촉매 제조를 목적으로 $Ni^{2+}$ 이온으로 피복된 $SiO_2$ 나노 졸 입자를 2차원 충상점토 화합물의 층간에 삽입, 가교화 시켜 비표면적 및 다공도가 우수한 $NiO-SiO_2$ 가교화 점토($NiO-SiO_2$-PILM)를 합성하였다. 나노 크기의 실리카 졸 입자는 tetraethyl orthosilicate(TEOS)를 가수분해하여 합성하였고, 여기에 $Ni^{2+}$ 수용액을 첨가한 다음 NaOH 용액을 적정하여 $Ni^{2+}-SiO_2$ 혼합 나노 졸입자를 완성하였다. 이렇게 제조된 혼합 졸 용액을 1wt%의 점토 수분산액에 첨가하여 $60{\circ}C$에서 5h 이온교환 반응을 통해 층간에 삽입, 수세, 건조 후 $40^{\circ}C$에서 2시간 열처리 하므로써 다공성 가교화 점토를 제조하였다. 나노 졸 입자의 가교화에 따라 점토의 층간거리($d_{001}$)는 $45{\AA}$ 정도 크게 증가하였고 $600^{\circ}C$까지도 다공구조가 안정하게 유지되었다. 또한 질소 흡착-탈착 등온선 분석 결과 비표면적($S_{BET}$)이 최대 $760m^2/g$으로 다공 구조가 매우 잘 발달되어 있음을 확인하였고, $NiO-SiO_2$ 졸 가교화 점토의 경우 $NiO-SiO_2$ 나노입자가 층간에 이중층으로 배열되어 있음을 알 수 있었다.

• 한국고분자학회지:고분자과학과기술
• /
• 제10권4호
• /
• pp.434-442
• /
• 1999

• 한국유가공학회:학술대회논문집
• /
• 한국유가공기술과학회 2004년도 제59회 추계유가공심포지움 - 유가공 산업의 신기술 동향 및 발전 방향
• /
• pp.17-29
• /
• 2004

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulisification process. They have very uniform diameters in the range of 1 to 100 nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not Bong developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.

• Journal of Dairy Science and Biotechnology
• /
• 제23권1호
• /
• pp.19-26
• /
• 2005

Nanofood can be simply defined as natural polymer particles containing functional food materials in nanoscale that are synthesized by polymerization or emulsification process. They have very uniform diameters in the range of 1 to 100nm and extensive surface areas due to the small particle size in spite of their non-porosity. Although the technique to produce nanofood has not long developing history, many works have been achieved in various fields. Nanofood has a lot of special advantages, such as functionality, diversity, applicability, etc. In case of the domestic food industries, however, the accumulation of related technique is insufficient against developed countries except used food materials. Also, it is difficult to acquire technical know-how from the developed countries that possess those technologies. We have been studied on preparing functional nanofood and developing new production processes since 1999. Last 5 years we have laid the foundation on the preparation of nanofood and now are focusing on developing new processes of nanofood and expending the field of its applications.

• Tribology and Lubricants
• /
• 제26권1호
• /
• pp.14-20
• /
• 2010

Tribological properties of nanoporous structured alumina film was investigated. Alumina film (AAO: anodic aluminum oxide) of $60{\mu}m$ thickness having nanopores of 45 nm diameter with 105 nm interpore-diatance was fabricated by mild anodization process. Reciprocating ball-on-flat sliding friction tests using 1 mm diameter steel ball as a counterpart were carried out with wide range of normal load from 1 mN to 1 N in an ambient environment. The morphology of worn surfaces were analyzed using scanning electron microscopy. The friction coefficient was strongly influenced by the applied normal load. Smooth layer patches were formed on the worn surface of both AAO and steel ball at relatively high load (100 mN and 1 N) due to tribochemical reaction and compaction of wear debris. These tribolayers contributed to the lower friction at high loads. Extremely thin layer patches, due to mild plastic deformation of surface layer, were sparsely distributed on the worn surface of AAO at low loads (1 mN and 10 mN) without the evidence of tribochemical reaction. Delaminated wear particles were generated at high loads by fatigue due to repeated loading and sliding.

• Applied Science and Convergence Technology
• /
• 제24권6호
• /
• pp.262-267
• /
• 2015

We demonstrate the growth of single-walled carbon nanotubes (SWNTs) using ethylene-based chemical vapor deposition (CVD) and ferritin-induced catalytic particles toward growth temperature reduction. We first optimized the gas composition of $H_2$ and $C_2H_4$ at 500 and 30 sccm, respectively. On a planar $SiO_2$ substrate, high density SWNTs were grown at a minimum temperature of $760^{\circ}C$. In the case of growth using nanoporous templates, many suspended SWNTs were also observed from the samples grown at $760^{\circ}C$; low values of $I_D/I_G$ in the Raman spectra were also obtained. This means that the temperature of $760^{\circ}C$ is sufficient for SWNT growth in ethylene-based CVD and that ethylene is more effective that methane for low temperature growth. Our results provide a recipe for low temperature growth of SWNT; such growth is crucial for SWNT-based applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.1100-1101
• /
• 2015

In this work, the effect of addition of acetylacetone on microstructure and quality of nanoporous $TiO_2$ photo-electrodes was studied in dye-sensitized solar cells (DSCs) and structure and electrical properties of fabricated cells were investigated. From the results, the DSCs fabricated with acetyl acetone showed highest photovoltaic performances. This behavior may be attributed to paste agglomeration decrease and interconnection and bonding improvement between $TiO_2$ particles. Furthermore, the most favorable dye absorption time results to be 10h: exceeding this time a decrease in efficiency is observed despite the increasing amount of dye absorption. The $TiO_2$ photo-electrode prepared under the conditions of acetylacetone ratio of 15% and dye absorption time of 10hr showed the better photovoltaic performance ($J_{sc}=12.48mA/cm^2$, $V_{oc}=0.69V$, ff=0.68, ${\eta}=5.86%$).

• 한국전기전자재료학회논문지
• /
• 제17권9호
• /
• pp.1001-1005
• /
• 2004

Rye-sensitized solar cell (DSSC) is a new class of solar cell, which consists of nanoporous TiO$_2$ electrode, dye-sensitizer, electrolyte, and counter electrode. Such cell is operated in sunlight via the principle of photosynthetic electrochemistry. In order to obtain the good dispersion of nano size TiO$_2$ particles In slurry, the pH of solvent, the sort and quantify of solvent additive and the quantity of surfactant were adjusted. As results, the lower the pH of solvent was the lower the viscosity of the slurry became. The addition of ethylene glycol and propylene glycol to dilute HNO$_3$ brought about the lowering of viscosity and the enhancement of stability in slurry. The addition of surfactant lowered the viscosity of slurry. It was possible to obtain the homogeneous and uniformly dispersed mesoporous TiO$_2$ film using the dilute HNO$_3$ solvent of pH 2 with the addition of ethylene glycol and neutral surfactant. DSSC was assembled with TiO$_2$ electrode and Pt electrode, and its photoelectric property was measured using the monochromatic wavelength in the rangee of 350∼700 nm.

• 공업화학
• /
• 제19권5호
• /
• pp.466-470
• /
• 2008

본 연구에서는 가연성 폐기물에서 발생되는 합성가스 내 $CH_4$를 나노기공성 촉매를 사용하여 $H_2$로 전환하고자 하였다. 이때 사용된 나노기공성 촉매는 $Ni/Al_2O_3$ 촉매를 one-pot 방법으로 제조하여 사용하였다. 촉매의 분석 결과, 삼차원으로 연결된 스폰지 모양을 갖는 입자가 형성되었으며, 구형의 상용 촉매보다 넓은 표면적과 작은 입자크기, 균일한 기공 크기의 특성을 지닌 나노기공성 촉매가 제조된 것을 확인할 수 있었다. $CH_4$ 개질반응에 사용된 $Ni/Al_2O_3$ 촉매의 Ni 최적 담지량은 16 wt%였으며 $750^{\circ}C$에서 $CH_4$ 전환율 91%, $CO_2$ 전환율 92%로 가장 높은 전환율을 나타냈다. 또한, 상용 알루미나를 사용하여 제조한 촉매와의 성능 비교 결과 자체 제조한 촉매가 약 20% 향상된 전환율을 나타냈다.