• Journal of the Korean institute of surface engineering
• /
• v.56 no.4
• /
• pp.243-249
• /
• 2023

Urea oxidation reaction (UOR) via electrochemical oxidation process can replace oxygen evolution reaction (OER) for green hydrogen production since UOR has lower thermodynamic potential (0.37 V_RHE) than that of OER (1.23 V_RHE). However, in the case of UOR, 6 electrons are required for the entire UOR. For this reason, the reaction rate is slower than OER, which requires 4 electrons. In addition, it is an important challenge to develop catalysts in which both oxidation reactions (UOR and OER) are active since the active sites of OER and UOR are opposite to each other. We prove that among the NiFe₂O₄ nanoparticles synthesized by the hydrothermal method at various synthesis temperatures, NiFe₂O₄ nanoparticle with properly controlled particle size and crystallinity can actively operate OER and UOR at the same time.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.221-226
• /
• 2012

DNA-functionalized silver and silver/gold bimetallic nanoparticle superstructure probes with controllable sizes and optical properties are synthesized using monothiol DNA and dithiothreitol. The superstructures exhibit a very narrow size distribution, which can be easily controlled by balancing the ratio of dithiothreitol and DNA. These superstructures assemble reversibly in a highly cooperative manner, and are SERS active. Multiplexed colorimetric detection of DNA targets using these superstructure probes has been demonstrated to identify three different DNA target sequences that are associated with three lethal diseases, respectively.

• Advances in nano research
• /
• v.6 no.4
• /
• pp.357-375
• /
• 2018

Two dimensional (2D) atomic layered nanomaterials exhibit some of the most striking phenomena in modern materials research and hold promise for a wide range of applications including energy and biomedical technologies. Graphene has received much attention for having extremely high surface area to mass ratio and excellent electric conductivity. Graphene has also been shown to maximize the activity of surface-assembled metal nanoparticle catalysts due to its unique characteristics of enhancing mass transport of reactants to catalysts. This paper specifically investigates the strategy of pre-formed nanoparticle self-assembly used for the formation of various metal nanoparticles supported on graphene families such as graphene, graphene oxide, and reduced graphene oxide and aims at understanding the interactions between ligand-capped metal nanoparticles and 2D nanomaterials. By varying the functional groups on the ligands between alkyl, aromatic, amine, and alcohol groups, different interactions such as van der Waals, ${\pi}-{\pi}$ stacking, dipole-dipole, and hydrogen bonding are formed as the 2D hybrids produced.

• Journal of Electrochemical Science and Technology
• /
• v.15 no.2
• /
• pp.261-267
• /
• 2024

An unconventional fabrication technique of nanoelectrode was developed using atomic force microscopy (AFM) and hydrogel. Until now, the precise control of electroactive area down to a few nm² has always been an obstacle, which limits the wide application of nanoelectrodes. Here, the nanometer-sized contact between the boron-doped diamond (BDD) as conductive AFM tip and the agarose hydrogel as solid electrolyte was well governed by the feedback amplitude of oscillation in the non-contact mode of AFM. Consequently, this low-cost and feasible approach gives rise to new possibilities for the fabrication of nanoelectrodes. The electroactive area controlled by the set point of AFM was investigated by cyclic voltammetry (CV) of the ferrocenmethanol (FcMeOH) combined with quasi-solid agarose hydrogel as an electrolyte. Single copper (Cu) nanoparticle was deposited at the apex of the AFM tip using this platform whose electrocatalytic activity for nitrate reduction was then investigated by CV and Field Emission-Scanning Electron Microscopy (FE-SEM), respectively.

• Korean Journal of Materials Research
• /
• v.30 no.12
• /
• pp.701-708
• /
• 2020

Irradiation of the metal nanoparticles causes local plasmon resonance in a specific wavelength band, which can improve the absorption and scattering properties of a structure. Since noble metal nanoparticles have better resonance effects than those of other metals, it is easy to identify plasmonic reactions and this is advantageous to find the optical tendency. Compared to having a particle gap or randomly arranged particle structures, densely and evenly packed structures can exhibit more uniform optical properties. Using the uniform properties, the structure can be applied to optical filtering applications. Therefore, in this paper, validation tests about metal nanoparticles and thin film structures are conducted for more accurate analysis. The optical properties of monolayer and bilayer noble metal nanoparticle structures with different diameters, packed in a uniform array, are investigated and their optical trends are analyzed. In addition, a thin film structure under identical conditions as metal nanoparticle structure is evaluated to confirm the improved optical characteristics.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.4
• /
• pp.15-25
• /
• 2021

Purpose: The purpose of this study is to form a new cosmetic market through the development of a composition with high skin permeability after adding omega 3 to Aloe Vera soothing gel products. Research design, data and methodology: In this study, omega-3 fatty acids were added to cosmetic products in the form of soothing gels. By applying nanoparticle technology to rapidly increase the penetration of raw materials into the skin, characteristics related to skin moisture and regeneration were determined. Omega-3 was used as a raw cosmetic material. Then 5% and 15% nanoparticle aqueous products containing omega-3 were prepared. The developed water hydrate was subjected to skin permeability test using artificial skin. Results: 53 hours of artificial transdermal penetration of the developed composition, the ethanol-based omega-3 containing nanoparticle solubilized raw material was about three times higher penetration than the ethanol-based omega-3 containing nanoparticle solubilized raw material. Conclusions: The raw material product (SR-1901) containing 5% of omega-3 nanoparticle water hydrate has skin regeneration ability and pain reduction effect. It can be expected that the skin cosmetics market will be reorganized into a new distribution structure and opportunity through omega-3 supplemented soothing gel cosmetics with improved efficacy than existing cosmetics.

• Korean Journal of Materials Research
• /
• v.24 no.10
• /
• pp.565-571
• /
• 2014

Nitrogen-doped ZnO nanoparticle-carbon nanofiber composites were prepared using electrospinning. As the relative amounts of N-doped ZnO nanoparticles in the composites were controlled to levels of 3.4, 9.6, and 13.8 wt%, the morphological, structural, and chemical properties of the composites were characterized by means of field-emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS). In particular, the carbon nanofiber composites containing 13.8 wt% N-doped ZnO nanoparticles exhibited superior catalytic properties, making them suitable for use as counter electrodes in dye-sensitized solar cells (DSSCs). This result can be attributed to the enhanced surface roughness of the composites, which offers sites for $I_3{^-}$ ion reductions and the formation of Zn3N2 phases that facilitate electron transfer. Therefore, DSSCs fabricated with 13.8 wt% N-doped ZnO nanoparticle-carbon nanofiber composites showed high current density ($16.3mA/cm^2$), high fill factor (57.8%), and excellent power-conversion efficiency (6.69%); at the same time, these DSSCs displayed power-conversion efficiency almost identical to that of DSSCs fabricated with a pure Pt counter electrode (6.57%).

• Journal of Sensor Science and Technology
• /
• v.31 no.2
• /
• pp.90-95
• /
• 2022

The effect of the structure of an ITO nanoparticle film sensor on its performance was studied. A printed ITO film (P-ITO film) was fabricated on a flexible polyethylene terephthalate (PET) substrate, and the contact resistance of the electrode and sensor response change were clarified according to the detection position. The contact resistance between Ag and P-ITO was observed to be -204.4 Ω using the transmission line method (TLM), confirming that a very good ohmic contact is possible. In addition, we confirmed that the contact position of the analyte had a significant influence on the response of the sensor. Based on these results, the performance of the four types of sensors was compared. Consequently, we observed that 1) optimizing the resistance of the printed film, 2) optimizing the electrode structure and analyte input position, and 3) optimizing the electrode area are very important for fabricating a metal oxide nanoparticle (MONP) sensor with optimal performance.

• Rapid Communication in Photoscience
• /
• v.2 no.1
• /
• pp.9-17
• /
• 2013

Visible light-sensitive $TiO_2$ and ZnO nanostructure materials have attracted great attention as the promising material for solar energy conversion systems such as photocatalysts for water splitting and environmental purification as well as nano-biosensors. Success of their applications relies on how to control their surface state behaviors related to the exciton dynamics and optoelectronic properties. In this paper, we briefly review some recent works on single nanoparticle photoluminescence (PL) technique and its application to observation of their surface state behaviors which are raveled by the conventional ensemble-averaged spectroscopic techniques. This review provides an opportunity to understand the temporal and spatial heterogeneities within an individual nanostructure, allowing for the potential use of single-nanoparticle approaches in studies of their photoenergy conversion and nano-scale optical biosensing.

• Transactions of the Society of Information Storage Systems
• /
• v.9 no.1
• /
• pp.1-4
• /
• 2013

Graphene and Graphene oxide have intense interest in fields such as physics, chemistry, and materials science, among others. They are the promising material for solving the current limitation that organics have barely luminescence. We observed variation of photoluminescence on graphene oxide based solution with Gold nanoparticle. Gold nanoparticles lead to shift the peak wavelength of graphene oxide and to enhance the photoluminescence intensity totally. This shows the possibility that control the luminescence property of graphene oxide by adding gold nanoparticle.