• 한국표면공학회지
• /
• 제51권4호
• /
• pp.237-242
• /
• 2018

We report on the fabrication and photoelectrochemical (PEC) properties of a ZnO nanorod array structure as an efficient photoelectrode for hydrogen production from sunlight-driven water splitting. Vertically aligned ZnO nanorods were grown on an indium-tin-oxide-coated glass substrate via seed-mediated hydrothermal synthesis method with the use of a ZnO nanoparticle seed layer, which was formed by thermally oxidizing a sputtered Zn metal thin film. The structural and morphological properties of the synthesized ZnO nanorods were examined using X-ray diffraction and scanning electron microscopy, as well as Raman scattering. The PEC properties of the fabricated ZnO nanorod photoelectrode were evaluated by photocurrent conversion efficiency measurements under white light illumination. From the observed PEC current density versus voltage (J-V) behavior, the vertically aligned ZnO nanorod photoelectrode was found to exhibit a negligible dark current and high photocurrent density, e.g., $0.65mA/cm^2$ at 0.8 V vs Ag/AgCl in a 1 mM $Na_2SO_4$ electrolyte. In particular, a significant PEC performance was observed even at an applied bias of 0 V vs Ag/AgCl, which made the device self-powered.

• Korean Journal of Chemical Engineering
• /
• 제35권12호
• /
• pp.2430-2441
• /
• 2018

Selenium (Se)-rich binary Cu-Se and In-Se nanoparticles (NPs) were synthesized by a modified heat-up method at low temperature ($110^{\circ}C$) using the gum exudates from a cherry blossom tree. Coating of CISe absorber layer was carried out using Se-rich binary Cu-Se and In-Se NPs ink without the use of any external binder. Our results indicated that the gum used in the synthesis played beneficial roles such as reducing and capping agent. In addition, the gum also served as a natural binder in the coating of CISe absorber layer. The CISe absorber layer was integrated into the solar cell, which showed a power conversion efficiency (PCE) of 0.37%. The possible reasons for low PCE of the present solar cells and the steps needed for further improvement of PCE were discussed. Although the obtained PCE is low, the present strategy opens a new path for the fabrication of eco-friendly CISe NPs solar cell by a relatively chief non-vacuum method.

• 대한안전경영과학회지
• /
• 제19권4호
• /
• pp.317-322
• /
• 2017

When the heat flux on the heating surface following changing heat condition in the boiling heat transfer system exceeds critical heat flux, the critical heat flux phenomenon is going over to immediately the film boiling area and then it is occurred the physical destruction phenomenon of various heat transfer systems. In order to maximize the safe operation and performance of the heat transfer system, it is essential to improve the CHF(Critical Heat Flux) of the system. Therefore, we have analysis the effect of improving CHF and characteristics of heat transfer following the nanoparticle coating thickness. As the results, copper nanocoating time are increased to CHF, and in case of nano-coatings are increased spray-deposited coating times more than in the fure water; copper nanopowder is increased up to 6.40%. The boiling heat transfer coefficients of the pure water are increased up to 5.79% respectively. Also, the contact angle is decreased and surface roughness is increased when nano-coating time is increasingly going up.

• 한국표면공학회지
• /
• 제54권5호
• /
• pp.260-266
• /
• 2021

Synthesizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate highly efficient gas sensors by means of possible enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned zinc oxide (ZnO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a ZnO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Zn metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the ZnO nanorods array of the single hexagonal wurtzite crystalline phase. From gas sensing measurements for the nitrogen dioxide (NO₂) gas, the vertically aligned ZnO nanorod array is observed to have a highly responsive sensitivity to NO₂ gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO₂ at 250 ℃ and a low NO₂ detection limit of 5 ppm in dry air. These results along with a facile fabrication process demonstrate that the ZnO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO₂ gas sensors.

• 한국표면공학회지
• /
• 제56권4호
• /
• pp.219-226
• /
• 2023

Utilizing low-dimensional structures of oxide semiconductors is a promising approach to fabricate relevant gas sensors by means of potential enhancement in surface-to-volume ratios of their sensing materials. In this work, vertically aligned cupric oxide (CuO) nanorods are successfully synthesized on a transparent glass substrate via seed-mediated hydrothermal synthesis method with the use of a CuO nanoparticle seed layer, which is formed by thermally oxidizing a sputtered Cu metal film. Structural and optical characterization by x-ray diffraction (XRD), scanning electron microscopy (SEM), and Raman spectroscopy reveals the successful preparation of the CuO nanorods array of the single monoclinic tenorite crystalline phase. From gas sensing measurements for the nitrogen monoxide (NO) gas, the vertically aligned CuO nanorod array is observed to have a highly responsive sensitivity to NO gas at relatively low concentrations and operating temperatures, especially showing a high maximum sensitivity to NO at 200 ℃ and a low NO detection limit of 2 ppm in dry air. These results along with a facile fabrication process demonstrate that the CuO nanorods synthesized on a transparent glass substrate are very promising for low-cost and high-performance NO gas sensors.

• 한국초전도ㆍ저온공학회논문지
• /
• 제12권3호
• /
• pp.7-11
• /
• 2010

For many large-scale applications of high-temperature superconducting materials, large critical current density($J_c$) in high applied magnetic fields are required. A number of methods have been reported to introduce artificial pinning centers(APCs) in $YBa_2Cu_3O_{7-\delta}$(YBCO) films for enhancement of their $J_c$. In this work, we investigated electric characteristic of YBCO films on $SrTiO_3$ (100) substrates whose surfaces were modified by the introduction of Au nanoparticles (AuNPs). Au nanoparticles were uniformly dispersed on STO substrates with one of typical solution techniques, self assembled monolayer. After heating the STO substrates with Au nanoparticles, the size of Au nanoparticles was around 29~32 nm in height and 41~49 nm in diameter. XRD diffraction patterns taken on the YBCO film with Au nanoparticles show the c-axis orientation. The measured $T_c$ of YBCO /AuNPs films was around 89K and the $J_c$ was 0.75 MA/$cm^2$ at 65 K and 1 T.

• 한국결정성장학회지
• /
• 제19권6호
• /
• pp.305-310
• /
• 2009

PMMA 입자의 표면에 양전하를 갖는 전해질 폴리머 PDDA와 음전하를 갖는TALH를 사용하여 $TiO_2$ 박막을 LBL 법에 의해 성공적으로 제조하였다. 수정진동자의 측정을 통해 TALH의 용액의 pH가 감소됨에 따라 TALH의 적층량이 늘어나고 PMMA의 입자 표면에 코팅된 (PDDA/TALH) 박막의 두께가 증가됨을 확인하였다. (PDDA/TALH)n의 순서에 의해 코팅된 PMMA 입자들은 bilayer 수의 변화에 따라 다양한 색 변화를 보여주었다. (PDDA/TALH) 박막의 bilayer 수(n)가 10과 20 일 경우에 $a^*$와 $b^*$의 값은 막이 코팅되지 않은 PMMA의 값보다 감소하였고 색 변화는 $a^*$, $b^*$ 색도도에서 각각 green과 blue 방향으로 이동하였다. 이후 n의 수가 30, 40으로 증가됨에 따라 $a^*$와 $b^*$의 값은 증가하였고 색의 변화는 red와 yellow 방향으로 각각 이동하였다. 최종적으로 $(PDDA/TALH)_{50}$ 박막이 코팅된 PMMA 입자들은 박막이 코팅되지 않은 PMMA 입자들과 거의 비슷한 $a^*$와 $b^*$의 값을 보여주었다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.65-65
• /
• 2012

Copper zinc tin sulfide ($Cu_2ZnSnS_4$, CZTS) is a very promising material as a low cost absorber alternative to other chalcopyrite-type semiconductors based on Ga or In because of the abundant and economical elements. In addition, CZTS has a band-gap energy of 1.4~1.5eV and large absorption coefficient over ${\sim}10^4cm^{-1}$, which is similar to those of $Cu(In,Ga)Se_2$(CIGS) regarded as one of the most successful absorber materials for high efficient solar cell. Most previous works on the fabrication of CZTS thin films were based on the vacuum deposition such as thermal evaporation and RF magnetron sputtering. Although the vacuum deposition has been widely adopted, it is quite expensive and complicated. In this regard, the solution processes such as sol-gel method, nanocrystal dispersion and hybrid slurry method have been developed for easy and cost-effective fabrication of CZTS film. Among these methods, the hybrid slurry method is favorable to make high crystalline and dense absorber layer. However, this method has the demerit using the toxic and explosive hydrazine solvent, which has severe limitation for common use. With these considerations, it is highly desirable to develop a robust, easily scalable and relatively safe solution-based process for the fabrication of a high quality CZTS absorber layer. Here, we demonstrate the fabrication of a high quality CZTS absorber layer with a thickness of 1.5~2.0 ${\mu}m$ and micrometer-scaled grains using two different non-vacuum approaches. The first solution-processing approach includes air-stable non-toxic solvent-based inks in which the commercially available precursor nanoparticles are dispersed in ethanol. Our readily achievable air-stable precursor ink, without the involvement of complex particle synthesis, high toxic solvents, or organic additives, facilitates a convenient method to fabricate a high quality CZTS absorber layer with uniform surface composition and across the film depth when annealed at $530^{\circ}C$. The conversion efficiency and fill factor for the non-toxic ink based solar cells are 5.14% and 52.8%, respectively. The other method is based on the nanocrystal dispersions that are a key ingredient in the deposition of thermally annealed absorber layers. We report a facile synthetic method to produce phase-pure CZTS nanocrystals capped with less toxic and more easily removable ligands. The resulting CZTS nanoparticle dispersion enables us to fabricate uniform, crack-free absorber layer onto Mo-coated soda-lime glass at $500^{\circ}C$, which exhibits a robust and reproducible photovoltaic response. Our simple and less-toxic approach for the fabrication of CZTS layer, reported here, will be the first step in realizing the low-cost solution-processed CZTS solar cell with high efficiency.

• 해양환경안전학회지
• /
• 제28권spc호
• /
• pp.30-36
• /
• 2022

수처리 후 직접 해양으로 배출하는 산업시설 등에서 Hazardous and Noxious Substance (HNS) 농도 변화를 연속 자동 측정하기 위한 센서의 기본적 성능으로 상온에서도 ppb 수준의 검출이 가능한 센서가 필요하다고 판단하여 기존의 센서의 감도를 높이기 위한 방법을 제안하였다. 우선 나노입자 박막에 전도성 탄소계 첨가물을 이용하여 필름의 전도도를 높이는 방법과 촉매 금속을 이용하여 표면에서의 이온 흡착도를 높이는 방법에 대해서 각각 연구하였다. 전도성 개선을 위해서 ITO 나노입자를 활용한 필름에 carbon black을 첨가물로 선택하여, 첨가물 함유량에 따른 센서의 성능변화를 관찰하였다. 그 결과 CB 함량 5 wt% 정도에서 전도성 증가에 의한 저항과 응답시간의 변화를 관찰할 수 있었고, 유기용제를 대상으로 한 실험에서 검출하한은 250 ppb 정도까지 낮아지는 것을 확인하였다. 또한 액체 중 이온 흡착도를 높이기 위하여 센서 표면에 촉매로 Au를 스퍼터로 제작한 표면 촉매층을 형성한 시료를 이용한 실험에서 센서의 응답은 20% 이상 증가하고 평균 검출하한은 61 ppm까지 낮아지는 것을 확인하였다. 이 결과로부터 금속산화물 나노입자를 활용한 화학저항형 센서가 상온에서도 수십 ppb 정도의 HNS를 검출할 수 있다는 것을 확인하였다.

• 한국포장학회지
• /
• 제25권3호
• /
• pp.69-77
• /
• 2019

자몽씨추출물(GSE)과 ZnONP을 아가필름에 동시에 첨가하여 다기능성 복합필름을제조하였다. Agar/GSE/ZnONP복합필름은 특히 자외선차단성과 항균성에 대한 시너지 효과를 나타냈다. 광 차단성은 자외선 파장범위인 280 nm와 가시광선 파장범위인 660 nm에서 유의적인 차이를 보이며 크게 나타났다. 자외선차단성은 agar/GSE와 agar/ZnONP 필름에 비해 agar/ZnONP^3%/GSE^5% 필름에서의 크게 상승하여 GSE와 ZnONP의 시너지 효과를 확인할 수 있었다. 항균성으로는 그람양성균인 L. monocytogenes와 그람음성균인 E. coli O157: H7 모두 agar/ZnONP^3%/GSE^5% 필름에서 강한 항균성 및 시너지 효과가 있었다. 자외선 차단성과 항균성은 포장식품의 안전성을 확보하고 유통기한을 연장시키는데 필수적인 특성으로 agar/ZnONP3%/GSE5% 필름은 식품의 유통기한 연장과 식품의 안전성을 위한 포장필름으로 활용 가치가 높을 것으로 사료된다.