• Journal of Convergence for Information Technology
• /
• v.7 no.5
• /
• pp.123-128
• /
• 2017

Nanostructured materials have received attention due to their unique electronic, optical, optoelectrical, and magnetic properties as a results of their large surface-to-volume ratio and quantum confinement effects. Thermal chemical vapor deposition process has attracted much attention due to the synthesis capability of various structured nanomaterials during the growth of nanostructures. In this study, silicon oxide nanowires were grown on Si\$SiO_2$(300 nm)\Pt(5~40 nm) substrates by two-zone thermal chemical vapor deposition with the source material $TiO_2$ powder via vapor-liquid-solid process. The morphology and crystallographic properties of the grown silicon oxide nanowires were characterized by field-emission scanning electron microscope and transmission electron microscope. As results of analysis, the morphology, diameter and length, of the grown silicon oxide nanowires are depend on the thickness of the catalyst films. The grown silicon oxide nanowires exhibit amorphous phase.

• Elastomers and Composites
• /
• v.45 no.3
• /
• pp.206-211
• /
• 2010

Zinc oxide(ZnO) nanoparticles were synthesized by reacting an aqueous-alcoholic zinc nitrate solution to sodium hydroxide under ultrasonic irradiation at room temperature. The fullerene($C_{60}$) and ZnO nanoparticles were heated individually in an electric furnace for two hours at $700^{\circ}C$. The morphology and optical properties of the $C_{60}$ and ZnO nanoparticles were characterized by X-ray diffraction(XRD), scanning electron microscopy(SEM), transmission electron microscopy(TEM) and ultraviolet/visible (UV-vis) spectroscopy. The photocatalytic activity of the heated and unheated the $C_{60}$ and ZnO nanoparticles for the decomposition of methylene blue(MB), methyl orange(MO) and rhodamine B(RhB) was examined using UV-vis spectroscopy.

• Journal of the Optical Society of Korea
• /
• v.20 no.6
• /
• pp.669-677
• /
• 2016

A miniaturized FTIR spectrometer based on lamellar grating interferometry is being developed for passive remote-sensing. Consisting of a pair of micro-mirror arrays, the lamellar grating can be fabricated using MEMS technology. This paper describes a method to compute the optical field in the interferometer to optimize the design parameters of the lamellar grating FTIR spectrometer. The lower limit of the micro-mirror width in the grating is related to the formation of a Talbot image in the near field and is estimated to be about $100{\mu}m$ for the spectrometer to be used for the wavelength range of $7-14{\mu}m$. In calculating the far field at the detection window, the conventional Fraunhofer equation is inadequate for detection distance of our application, misleading the upper limit of the micro-mirror width to avoid interference from higher order diffractions. Instead, the far field is described by the unperturbed plane-wave combined with the boundary diffraction wave. As a result, the interference from the higher order diffractions turns out to be negligible as the micro-mirror width increases. Therefore, the upper limit of the micro-mirror width does not need to be set. Under this scheme, the interferometer patterns and their FT spectra are successfully generated.

• Journal of Wetlands Research
• /
• v.17 no.4
• /
• pp.407-413
• /
• 2015

As the number of applications containing nanomaterials increase, aquatic ecosystem exposure to nanoparticles (NPs) is unavoidable. In this study, we carried out toxicity assessment to Au-nanoparticles(NPs) of Rana dybowskii eggs and tadpoles. Toxicity was recorded hatching rate, body condition(Snout-tail length, STL), and behavioral sensitivity. Behavioral sensitivity was analyzed to anti-predator behavior using Ethovision XT 9. Au-NPs did not show any toxicity of hatching rate and STL. But, Tadpoles exposed to Au-NPs decrease behavioral sensitivity of stimuli. This study has value of environmental toxicity evaluation because these results show the new way of toxicity assessment.

• Membrane Journal
• /
• v.21 no.1
• /
• pp.39-45
• /
• 2011

An amphiphilic graft copolymer consisting of a poly(vinyl chloride) (PVC) backbone and poly(styrene sulfonic acid) (PSSA) side chains (PVC-g-PSSA) was synthesized via atom transfer radical polymerization (ATRP). This polymer electrolyte membrane was ion-exchanged to Ag ions by immersing in 10 wt% $AgNO_3$ aqueous solution and templated the growth of Ag nanoparticles by a reducing agent. The formation of Ag nanoparticles was confirmed using UV-visible spectroscopy and X-ray diffraction (XRD). Transmission electron microscopy (TEM) revealed that utilization of $NaBH_4$ was the most effective in the formation of Ag nanoparticles with 10~15 nm in size. The formation of Ag nanoparticles was also strongly affected by the concentration of reducing agent and reduction time.

• Journal of Powder Materials
• /
• v.15 no.2
• /
• pp.114-118
• /
• 2008

Functional nanomaterial is expected to have improved capacities on various fields. Especially, metal nanoparticles dispersed in polymer matrix and metal nanofiber, one of the functional nanomaterials, are able to achieve improvement of property in the electric and other related fields. In this study, the fabrication of metal (Ag) nanoparticle dispersed nanofibers were attempted. The Ag nanoparticle dispersed polymer nanofiber and Ag nanofiber were fabricated by electrospinning method using electric force. First, PVP/$AgNO_3$ nanofibers were synthesized by electrospinning in $18{\sim}22kV$ voltage with the starting materials (Ag-nitrate) added polymer (PVP; poly (vinylpyrrolidone)). Then Ag nanoparticle dispersed polymer nanofibers were fabricated to reduce hydrogen reduction at $150^{\circ}C$ for 3hr. And Ag nanofibers were synthesized by the decomposited of PVP at $300{\sim}500^{\circ}C$ for 3hr. The nanofibers were analyzed by XRD, TGA, FE-SEM and TEM. The experimental results showed that the Ag nanofibers could be applied in many fields as an advanced material.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.6
• /
• pp.396-401
• /
• 2014

Nanomaterials have been widely used in many fields. This study investigates the effects of metal oxide nanoparticles (CuO, NiO, $TiO_2$, $Fe_2O_3$, $Co_3O_4$, ZnO) on germination and germination index (G.I.) of seeds, Lactuca and Raphanus. Under aqueous exposure, CuO on Lactuca shows the most significant impacts on activities compared to others, showing $EC_{50s}$ for germination and G.I. as 0.46 mg/L and 0.37%, respectively. The effects of nanoparticle phytotoxicity on seed Lactuca was much higher than that of Raphanus. In general, the toxicities on seed germination and germination index were as following orders : CuO > ZnO > NiO ${\gg}$ $TiO_2$, $Fe_2O_3$, $Co_3O_4$. No measurable inhibition was observed at 1,000 mg/L (maximum exposure concentration) of $TiO_2$, $Fe_2O_3$, $Co_3O_4$.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.285-290
• /
• 2004

Nondestructive damage sensitivity of carbon nanotube(CNT) and nanofiber (CNF)/epoxy composites with their adding contents was investigated using electro-micromechanical technique. Carbon black (CB) was used only for the comparison with CNT and CNF. The fracture of carbon fiber was detected by acoustic emission (AE), which was correlated to the change in electrical resistance, ΔR under double-matrix composites (DMC) test. Stress sensing on carbon nanocomposites was performed by electro-pullout test under uniform cyclic loading. At the same volume fraction, the damage sensitivity for fiber fracture, matrix deformation and stress sensing were highest for CNT/epoxy composite, whereas for CB/epoxy composite they were the lowest among three carbon nanomaterials (CNMs). Damage sensitivity was correlated with morphological observation of carbon nanocomposites. Homogeneous dispersion among CNMs could be keying parameters for better damage monitoring. In this study, damage sensing of carbon nanocomposites could be evaluated well nondestructively by the electrical resistance measurement with AE.

• Tribology and Lubricants
• /
• v.31 no.6
• /
• pp.264-271
• /
• 2015

Adhesion force of nanomaterials such as nanoparticle, nanowire, and nanorods should be significantly considered for its mechanical applications. However, examination of the adhesion force is limited since it is technically challenging to carry out experiments with such small objects. Therefore, in this work, molecular dynamics simulation (MDS) was conducted to determine the adhesion force between a nanowire and a flat surface, which could not be readily assessed through experiments. The adhesion force of a cylindrical-shaped nanowire was assessed by performing MDS and applying an equation of Van der Waals interaction. Simulation was conducted in two steps: indentation of a spherical tip on the flat surface and indentation of a cylinder on the flat surface, because the purpose of the simulation was comparing the results of the simulation and calculation of the Van der Waals interaction equation. From the simulation, Hamaker constant used for the equation of Van der Waals interaction was determined to be 2.93 °ø 10?18 J. Using this constant, the adhesion force of the nanowire on the flat surface was readily estimated by calculating Van der Waals equation to be approximately 65~89 nN with respect to the diameter of the nanowire. Moreover, the adhesion force of the nanowire was determined to be 52~77 nN from the simulation It was observed that there was a slight discrepancy (approximately 15~25%) between the results of the simulation and the theoretical calculation. Thus, it was confirmed that the calculation of Van der Waals interaction could be utilized to assess the adhesion force of the nanowire.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.397-397
• /
• 2010

Bone is considered as hierarchically organized biocomposites of organic (collagen) and inorganic (hydroxyapatite) materials. The precise structural dependence between hydroxyapatite (HAp, $Ca_{10}(PO_4)_6(OH)_2)$ crystals and collagen fibril is critical to unique characteristics of bone. To meet those conditions and obtain optimal properties, it is essential to understand and control the initial growth mechanisms of hydroxyapatite at the molecular level, such as other nano-structured materials. In this study, collagen fibrils were prepared by adsorbing native type I collagen molecules onto hydrophobic surface. Hydrophobicity was introduced on the Si wafer surface by using PECVD (plasma enhanced chemical vapor deposition) method and cyclohexane as a precursor. Biomimetic nucleation and growth of HAp on the self-assembled collagen nanofibrils were occurred through incubation of the sample in SBF (simulated body fluid). Chemical and morphological evolution of HAp nanocrystals was investigated by surface-sensitive analytical techniques such as ToF-SIMS (Time-of-Flight Secondary Ion Mass Spectrometry) and AFM (Atomic Force Microscopy) in the early growth stages (< 24 hrs). The very initial stages (< 12 hrs) of mineralization could be clearly demonstrated by ToF-SIMS chemical mapping of surface. In addition to ToF-SIMS and AFM measurement, scanning electron microscopy, energy dispersive spectroscopy and X-ray diffraction analysis were conducted to characterize the HAp layer in the late stages. This study is of great importance in the growth of real bone-like materials with a structure analogous to that of natural bones and the development of biomimetic nanomaterials.