• Korean Chemical Engineering Research
• /
• 제46권4호
• /
• pp.686-691
• /
• 2008

산화아연은 광학적/전기적 특성 때문에 많이 연구되고 있는 재료이지만 산, 염기분위기에 약하기 때문에 양극 산화법을 이용하여 제조하기 힘들며, 현재 보고 되어 지고 있는 연구결과 역시도 많지 않다. 본 논문에서는 일반적인 전해질인 수용액이 아닌 에탄올과 $H_2SO_4$의 혼합용액을 사용하여 양극산화 하였으며 수용액에서 제조된 ZnO와는 다른 자기 정렬된 줄무늬의 육각판상구조를 가진 ZnO를 제조할 수 있었다. 이는 $H_2SO_4$를 함유한 에탄올용액에서 $H_2SO_4$에 미량 포함된 $H_2O$가 ZnO의 선택적인 용해를 함으로서 자기 정렬된 구조를 만드는데 기인한다. $H_2SO_4$의 농도, 인가전압, 양극산화 시간, 물 첨가 등에 따른 영향 및 자기 정렬된 줄무늬의 육각판상구조를 생성하는 메커니즘을 다루었다.

• 한국환경보건학회지
• /
• 제45권5호
• /
• pp.405-425
• /
• 2019

Objective: This study aimed to review the methodologies for evaluation of consumer spray products containing engineered nanomaterials (ENM), particularly focusing on inhalation exposure. Method: Literature on the evaluation methods for aerosolized ENM exposure from consumer spray products were collected through academic web searching. Common methodologies used in the literature, including research reports and academic articles, were also introduced. Results: The number of ENM-containing products have shown a considerable increase over recent years, from 54 in 2005 to 1,827 in 2018. Currently there is still discussion over the existing regulations with regard to product safety. Analysis of both ENM suspensions in the products and their aerosols is important for risk assessment. Comparison between the phases suggests how the size and concentration of particles change during the spray process. To analyze the ENM suspensions, dynamic light scattering, electron microscopy techniques, and inductively coupled plasma with mass spectrometry were used. In the aerosol monitoring, direct-reading instruments have been used to monitor the aerosols and conventional active sampling is used together to supplement the lack of real-time monitoring. There are also some models for estimating inhalation exposure. These models may be used to estimate mass exposure to nanomaterials contained in consumer products. Conclusion: Although there is no standardized method to evaluate ENM exposure from consumer products, many concerns about ENM have emerged. Every potential measure to reduce exposure to ENM from spray product use should be implemented through a precautionary recognition.

• Korean Chemical Engineering Research
• /
• 제59권3호
• /
• pp.450-454
• /
• 2021

현재, 감마 핵종 분석은 주로 무기섬광체 또는 반도체 검출기를 활용하여 여러 분야에 사용되고 있다. 이러한 검출기는 분해능이 좋지만 크기가 제한적이며, 가공성이 낮고 경제성이 플라스틱 섬광체보다 낮다. 따라서, 나노물질인 양자점과 플라스틱섬광체의 장점을 이용하여 양자점 나노물질 기반 플라스틱 섬광체를 개발하였다. 가장 많이 활용되고 있는 Cd계열 물질인 CdS/ZnS 양자점을 플라스틱 매트릭스에 교반하여 제작하였으며, 이를 ⁶⁰Co핵종 대상 계측 실험을 하여 상용플라스틱 섬광체의 성능과 비교 분석하였다. 상용플라스틱 섬광체 대비 CdS/ZnS 양자점 기반 플라스틱 섬광체가 20~30% 높은 효율을 보였다. 이는 의료분야뿐만 아니라 원자력 해체분야에서도 방사능 분석기로 활용 가능할 것으로 판단된다.

• 한국산업융합학회 논문집
• /
• 제26권6_3호
• /
• pp.1297-1303
• /
• 2023

Research on enhancing the mechanical strength, lightweight properties, electrical conductivity, and thermal conductivity of composite materials by incorporating nano-materials is actively underway. Thermoplastic resins can change their form under heat, making them highly processable and recyclable. In this study, Polyamide-Nylon 6 (PA6), a thermoplastic resin, was utilized, and as reinforcing agents, fused carbon nano-materials (FCN) formed by structurally combining Carbon Nanotube(CNT) and Graphene were employed. Nano-materials often face challenges related to cohesion and dispersion. To address this issue, Silane functional groups were introduced to enhance the dispersion of FCN in PA6. The manufacturing conditions for the composite materials involved determining the use of a dispersant and varying FCN content at 0.05 wt%, 0.1 wt%, and 0.2 wt%. Tensile strength measurements were conducted, and FE-SEM analysis was performed on fracture surfaces. As a result of the tensile strength test, it was confirmed that compared to pure PA6, the strength of the polymer composite with a content of 0.05 wt% was improved by about 60%, for 0.1 wt%, about 65%, and for 0.2 wt%, the strength was improved by 50%. Also, when compared according to the content of FCN, the best strength value was shown when 0.1 wt% was added. The elastic modulus also showed an improvement of about 15% in the case of surface treatment compared to the case without surface treatment, and an improvement of about 70% compared to pure PA6. Through FE-SEM, it was confirmed that the matrix material and silane-modified nanomaterial improved the dispersibility and bonding strength of the interface, helping to support the load evenly and enabling effective stress transfer.

• 대한환경공학회지
• /
• 제37권4호
• /
• pp.218-227
• /
• 2015

나노기술의 이용도가 높아지면서 나노물질 유출로 인한 환경오염 문제가 제기되고 있다. 수질시료 내 나노물질의 분석을 위해서는 시료의 교란을 최소화할 수 있는 보관조건 마련이 선결 요건이지만, 아직까지 적합한 보관조건이 제시되고 있지 않다. 이에 본 연구는 citrate로 코팅된 은 나노물질(cit-AgNP)을 대상으로 금속나노물질을 함유한 수질시료의 보관조건을 제시하고자 수행되었다. 이를 위해 시간분해 동적산란법(time-resolved dynamic light scattering)을 이용하여 pH, 배경용액의 농도, 온도, 나노물질의 농도 등과 같은 환경적인 조건과 시간에 따른 cit-AgNP의 크기 변화를 관찰하였다. 실험을 통한 각 환경조건별 AgNP의 응집특성을 해석하고 이러한 결과를 바탕으로 시료의 보관조건을 제시하였다. 그리고 AgNP의 입자농도와 응집속도의 선형적 관계로부터 구한 doublet time을 이용하여 시료의 보관기간을 산정하였다. 실험결과, pH는 7 이상, 배경 용액($Ca(NO_3)_2$)의 농도는 3 mM 이하, 온도는 냉장($4^{\circ}C$) 상태, 그리고 cit-AgNP의 농도는 2 mg/L 이하에서 응집속도가 0에 가까운 값을 나타내었다. 또한 수질시료 내 존재하는 100 nm cit-AgNP의 농도를 환경에 존재할 수 있는 낮은 수준인 $1{\mu}g/L$로 가정한 후 doublet time를 구한 결과, 가능한 시료의 보관기간은 15.79~17.53일 정도인 것으로 조사되었다. 하지만 pH와 배경 용액의 농도 조절은 시료의 변질과 교란이 우려되기 때문에 보관조건으로 일반화하여 제시하는 것은 적절하지 않고, 나노물질 자체의 농도를 조절하는 것은 수질시료 내 나노물질의 농도 등의 분석을 위한 시료의 보관조건으로 바람직하지 않다. 그러므로 본 연구의 결과로부터 일반화하여 제시할 수 있는 보관조건은 냉장($4^{\circ}C$) 상태에서 2주일 정도인 것으로 판단된다.

• 전자통신동향분석
• /
• 제33권1호
• /
• pp.123-130
• /
• 2018

Tactile sensors, which are commonly referred to as pressure and strain sensors, have been extensively investigated to meet the demands for attachable and wearable electronics for monitoring the health status or activity of human users. For this purpose, the introduction of two-dimensional (2D) materials such as graphene and transition metal dichalcogenides (TMDs) with high mechanical strength at the atomic scale is very suitable for tactile sensors applicable for use in human-friendly devices. In this paper, we examine a descriptive summary of a tactile sensor and review state-of- the-art research trends of 2D material-based tactile sensors in terms of the material and architecture. Finally, we propose a roadmap for future studies into advanced tactile sensors based on our ongoing research.

• Carbon letters
• /
• 제12권1호
• /
• pp.39-43
• /
• 2011

Synthesis of carbon fibers from cotton fiber by pyrolysis process has been described. Synthesis parameters are optimized using Taguchi optimization technique. Synthesized carbon fibers are used for studying hydrogen adsorption capacity using Seivert's apparatus. Transmission electron microscopy analysis and X-ray diffraction of carbon fiber from cotton suggested it to be very transparent type material possessing graphitic nature. Carbon synthesized from cotton fibers under the conditions predicted by Taguchi optimization methodology (no treatment of cotton fiber prior to pyrolysis, temperature of pyrolysis $800^{\circ}C$, Argon as carrier gas and paralyzing time for 2 h) exhibited 7.32 wt% hydrogen adsorption capacity.

• Progress in Superconductivity
• /
• 제9권1호
• /
• pp.11-17
• /
• 2007

Magnetization studies have been carried out on $MgB_2$ polycrystalline samples in the temperature range of 5 - 44 K and in the magnetic field up to 7 Tesla. The critical current density was calculated from hysteresis loops using the Bean's critical state model, and the highest value of $J_c$ at 20 K was $2.7{\times}10^5\;A/cm^2$ at 2 Tesla. The hysteresis loops were carefully examined to determine the temperature and magnetic field range where flux jumps appeared. The first jump occurred typically at 1 Tesla. Due to the strong pinning, we observed the presence of flux jump below H = 1 Tesla at temperature below 30 K.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 춘계학술대회 논문집
• /
• pp.81-82
• /
• 2014

Recently it is often reported about toxic nanomaterials to organisms. In other words, it is called nanotoxicity, toxic nanomaterials have extremely toxic properties. Zinc oxide is widely used as a promising nanomaterials, but some researchers are warning that nanotype zinc oxide has nanotoxicity. One of typical zinc oxide materials is a zinc oxide nanowire, especially, there is no technique which is detecting a zinc oxide nanowire because of its geometric. In here, we use reduced graphene oxide in order to detect zinc oxide nanowire and use DNA immobilized cantilever sensor, we detect graphene wrapped zinc oxide nanowire. Detection of a zinc oxide nanowire is measured by shifting of cantilever's resonance frequency based on vibration theory. It is proved that cantilever sensor is valid for nanomaterial detection. We showed that detection of a zinc oxide nanowire is successful.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.1-6
• /
• 2013

The key concept of nanopowder agglomerate sintering (NAS) is to enhance material transport by controlling the powder interface volume of nanopowder agglomerates. Using this concept, we developed a new approach to full density processing for the fabrication of pure iron nanomaterial using Fe nanopowder agglomerates from oxide powders. Full density processing of pure iron nanopowders was introduced in which the powder interface volume is manipulated in order to control the densification process and its corresponding microstructures. The full density sintering behavior of Fe nanopowders optimally size-controlled by wet-milling treatment was discussed in terms of densification process and microstructures.