참고문헌
- Scruggs CE. Reducing hazardous chemicals in consumer products: proactive company strategies. J Clean Prod. 2013; 44: 105-114. https://doi.org/10.1016/j.jclepro.2012.12.005
- Dimitroulopoulou C, Lucica E, Johnson A, Ashmore M, Sakellaris I, Stranger M, et al. EPHECT I: European household survey on domestic use of consumer products and development of worst-case scenarios for daily use. Sci Total Environ. 2015; 536: 880-889. https://doi.org/10.1016/j.scitotenv.2015.05.036
- Park J. A study on enactment of Act on the registration and Evaluation, etc. of Chemical Substances. Environ Forum. 2011; 169(8): 1-8.
- Park JY, Lee K, Shin HS, Yang W. Review of exposure assessment to obtain exposure factors of consumer products. Korean J Environ Health Sci. 2013; 39(6): 532-540. https://doi.org/10.5668/JEHS.2013.39.6.532
- Mitrano DM, Motellier S, Clavaguera S, Nowack B. Review of nanomaterial aging and transformations through the life cycle of nano-enhanced products. Environ Int. 2015; 77: 132-147. https://doi.org/10.1016/j.envint.2015.01.013
- Kim HA, Lee BT, Na SY, Kim KW, Ranville JF, Kim SO, et al. Characterization of silver nanoparticle aggregates using single particle-inductively coupled plasma-mass spectrometry (spICP-MS). Chemosphere. 2017; 171: 468-475. https://doi.org/10.1016/j.chemosphere.2016.12.063
- Seaton A, Tran L, Aitken R, Donaldson K. Nanoparticles, human health hazard and regulation. J R Soc Interface. 2009; Suppl 1: S119-S129.
- Bauer C, Buchgeister J, Hischier R, Poganietz W, Schebek L, Warsen J. Towards a framework for life cycle thinking in the assessment of nanotechnology. J Clean Prod. 2008; 16(8): 910-926. https://doi.org/10.1016/j.jclepro.2007.04.022
- Caballero-Guzman A, Nowack B. A critical review of engineered nanomaterial release data: Are current data useful for material flow modeling? Environ Pollut. 2016; 213: 502-517. https://doi.org/10.1016/j.envpol.2016.02.028
- Hansen S, Larsen BH, Olsen SI, Baun A. Categorization framework to aid hazard identification of nanomaterials. Nanotoxicology. 2007; 1(3): 243-250. https://doi.org/10.1080/17435390701727509
- Losert S, von Goetz N, Bekker C, Fransman W, Wijnhoven SW, Delmaar C, et al. Human exposure to conventional and nanoparticle-containing sprays-A critical review. Environ Sci Technol. 2014; 48(10): 5366-5378. https://doi.org/10.1021/es5001819
- Norgaard AW, Larsen ST, Hammer M, Poulsen SS, Jensen KA, Nielsen GD, et al. Lung damage in mice after inhalation of nanofilm spray products: the role of perfluorination and free hydroxyl groups. Toxicol Sci. 2010; 116(1): 216-224. https://doi.org/10.1093/toxsci/kfq094
- Hansen SF, Michelson ES, Kamper A, Borling P, Stuer-Lauridsen F, Baun A. Categorization framework to aid exposure assessment of nanomaterials in consumer products. Ecotoxicology. 2008; 17(5): 438-447. https://doi.org/10.1007/s10646-008-0210-4
- Vance ME, Kuiken T, Vejerano EP, McGinnis SP, Hochella Jr MF, Rejeski D, et al. Nanotechnology in the real world: Redeveloping the nanomaterial consumer products inventory. Beilstein J Nanotech. 2015; 6(1): 1769-1780. https://doi.org/10.3762/bjnano.6.181
- Keller AA, McFerran S, Lazareva A, Suh S. Global life cycle releases of engineered nanomaterials. J Nanopart Res. 2013; 15(6): 1692. https://doi.org/10.1007/s11051-013-1692-4
- Piccinno F, Gottschalk F, Seeger S, Nowack B. Industrial production quantities and uses of ten engineered nanomaterials in Europe and the world. J Nanopart Res. 2012; 14(9): 1109. https://doi.org/10.1007/s11051-012-1109-9
- Gazso A, Simko M. Voluntary approaches by industry in the field of nanomaterials. Nano Trust Dossiers. 2010; Article No. 016en: 1-6.
- Rauscher H, Rasmussen K, Sokull-Klüttgen B. Regulatory aspects of nanomaterials in the EU. Chem Ing Tech. 2017; 89(3): 224-231. https://doi.org/10.1002/cite.201600076
- Sayre PG, Steinhäuser KG, van Teunenbroek T. Methods and data for regulatory risk assessment of nanomaterials: questions for an expert consultation. NanoImpact. 2017; 8: 20-27. https://doi.org/10.1016/j.impact.2017.07.001
- Vance ME, Marr LC. Exposure to airborne engineered nanoparticles in the indoor environment. Atmos Environ. 2015; 106: 503-509. https://doi.org/10.1016/j.atmosenv.2014.12.056
- European Commision (EC). Nanomaterials in REACH and CLP. Available: http://ec.europa.eu/environment/chemicals/nanotech/reach-clp/index_en.htm [accessed on 24 June 2019]
- European Commision (EC). Regulation (EC) No. 1223/2009 of the European parliament and of the Council of 30 November 2009 on Cosmetic Products, Off. J. EU 2009. L342, 59. 2009.
- Korea Ministry of Environment (KMOE). The 2nd Korean Governmental-wide National Plans for Nano Safety and Control (2017-2021). Available: http://library.me.go.kr/search/DetailView.ax?sid=1&cid=5635670 [accessed on 24 June 2019]
- Throne-Holst H, Rip A. Complexities of labelling of nanoproducts on the consumer markets. Eur J Law Technol. 2011; 2(3).
- Fiorino DJ. Voluntary initiatives, regulation, and nanotechnology oversight: Charting a path. Project on Emerging Nanotechnologies. Washington DC: Woodrow Wilson International Center for Scholars; 2010. p. 1-56.
- Gruere GP. Labeling nano-enabled consumer products. Nano Today. 2011; 6(2): 117-121. https://doi.org/10.1016/j.nantod.2011.02.005
- Bootz A, Vogel V, Schubert D, Kreuter J. Comparison of scanning electron microscopy, dynamic light scattering and analytical ultracentrifugation for the sizing of poly (butyl cyanoacrylate) nanoparticles. Eur J Pharm Biopharm. 2004; 57(2): 369-375. https://doi.org/10.1016/S0939-6411(03)00193-0
- Kato H, Nakamura A, Ouchi N, Kinugasa S. Determination of bimodal size distribution using dynamic light scattering methods in the submicrometer size range. Mater Express. 2016; 6(2): 175-182. https://doi.org/10.1166/mex.2016.1290
- Brar SK, Verma M. Measurement of nanoparticles by light-scattering techniques. TrAC Trend Anal Chem. 2011; 30(1): 4-17. https://doi.org/10.1016/j.trac.2010.08.008
- Hassellov M, Readman JW, Ranville JF, Tiede K. Nanoparticle analysis and characterization methodologies in environmental risk assessment of engineered nanoparticles. Ecotoxicology. 2008; 17(5): 344-361. https://doi.org/10.1007/s10646-008-0225-x
- Krystek P, Ulrich A, Garcia CC, Manohar S, Ritsema R. Application of plasma spectrometry for the analysis of engineered nanoparticles in suspensions and products. J Anal Atom Spectrom. 2011; 26(9): 1701-1721. https://doi.org/10.1039/c1ja10071h
- National Institute of Environmental Research (NIER). Establishment of foundation on exposure asesment for products containing manufactured nanomaterials. NIER Research Report (No. NIERSP2014-230). 2014: p. 1-553.
- Tiede K, Boxall AB, Tear S, Lewis J, David H, Hassellov M. Food additives and contaminants part a-chemistry analysis control exposure and risk. Assessment. 2008; 25(7): 795-821.
- Hand JL, Kreidenweis SM. A new method for retrieving particle refractive index and effective density from aerosol size distribution data. Aerosol Sci Technol. 2002; 36(10): 1012-1026. https://doi.org/10.1080/02786820290092276
- Bekker C, Brouwer DH, van Duuren-Stuurman B, Tuinman IL, Tromp P, Fransman W. Airborne manufactured nano-objects released from commercially available spray products: temporal and spatial influences. J Expo Sci Env Epid. 2014; 24(1): 74-81. https://doi.org/10.1038/jes.2013.36
- Boverhof DR, David RM. Nanomaterial characterization: considerations and needs for hazard assessment and safety evaluation. Anal Bioanal Chem. 2010; 396(3): 953-961. https://doi.org/10.1007/s00216-009-3103-3
- Calderon L, Han TT, McGilvery CM, Yang L, Subramaniam P, Lee K-B, et al. Release of airborne particles and Ag and Zn compounds from nanotechnology-enabled consumer sprays: Implications for inhalation exposure. Atmos Environ. 2017; 155: 85-96. https://doi.org/10.1016/j.atmosenv.2017.02.016
- Chen BT, Afshari A, Stone S, Jackson M, Schwegler-Berry D, Frazer DG, et al. Nanoparticles-containing spray can aerosol: characterization, exposure assessment, and generator design. Inhal Toxicol. 2010; 22(13): 1072-1082. https://doi.org/10.3109/08958378.2010.518323
- Kim E, Lee JH, Kim JK, Lee GH, Ahn K, Park JD, et al. Case study on risk evaluation of silver nanoparticle exposure from antibacterial sprays containing silver nanoparticles. J Nanomater. 2015; 1-8.
- Lorenz C, Hagendorfer H, von Goetz N, Kaegi R, Gehrig R, Ulrich A, et al. Nanosized aerosols from consumer sprays: experimental analysis and exposure modeling for four commercial products. J Nanopart Res. 2011; 13(8): 3377-3391. https://doi.org/10.1007/s11051-011-0256-8
- Nazarenko Y, Han TW, Lioy PJ, Mainelis G. Potential for exposure to engineered nanoparticles from nanotechnology-based consumer spray products. J Expo Sci Env Epid. 2011; 21(5): 515-528. https://doi.org/10.1038/jes.2011.10
- Nazarenko Y, Lioy PJ, Mainelis G. Quantitative assessment of inhalation exposure and deposited dose of aerosol from nanotechnology-based consumer sprays. Environ Sci Nano. 2014; 1(2): 161-171. https://doi.org/10.1039/c3en00053b
- Nazarenko Y, Zhen H, Han T, Lioy PJ, Mainelis G. Nanomaterial inhalation exposure from nanotechnology-based cosmetic powders: a quantitative assessment. J Nanopart Res. 2012; 14(11): 1-14. https://doi.org/10.1007/s11051-012-1183-z
- Park J, Ham S, Jang M, Lee J, Kim S, Kim S, et al. Spatial-temporal dispersion of aerosolized nanoparticles during the use of consumer spray products and estimates of inhalation exposure. Environ Sci Technol. 2017.
- Quadros ME, Marr LC. Silver nanoparticles and total aerosols emitted by nanotechnology-related consumer spray products. Environ Sci Technol. 2011; 45(24): 10713-10719. https://doi.org/10.1021/es202770m
- Fabricius A-L, Duester L, Meermann B, Ternes TA. ICP-MS-based characterization of inorganic nanoparticles-sample preparation and off-line fractionation strategies. Anal Bioanal Chem. 2014; 406(2): 467-479. https://doi.org/10.1007/s00216-013-7480-2
- Hagendorfer H, Kaegi R, Parlinska M, Sinnet B, Ludwig C, Ulrich A. Characterization of silver nanoparticle products using asymmetric flow field flow fractionation with a multidetector approach-a comparison to transmission electron microscopy and batch dynamic light scattering. Anal Chem. 2012; 84(6): 2678-2685. https://doi.org/10.1021/ac202641d
- Hagendorfer H, Kaegi R, Traber J, Mertens SF, Scherrers R, Ludwig C, et al. Application of an asymmetric flow field flow fractionation multidetector approach for metallic engineered nanoparticle characterization-prospects and limitations demonstrated on Au nanoparticles. Anal Chim Acta. 2011; 706(2): 367-378. https://doi.org/10.1016/j.aca.2011.08.014
- Majedi SM, Lee HK. Recent advances in the separation and quantification of metallic nanoparticles and ions in the environment. TrAC Trend Anal Chem. 2016; 75: 183-196. https://doi.org/10.1016/j.trac.2015.08.009
- Tulve NS, Stefaniak AB, Vance ME, Rogers K, Mwilu S, LeBouf RF, et al. Characterization of silver nanoparticles in selected consumer products and its relevance for predicting children's potential exposures. Int J Hyg Env Health. 2015; 218(3): 345-357. https://doi.org/10.1016/j.ijheh.2015.02.002
- Ulrich A, Losert S, Bendixen N, Al-Kattan A, Hagendorfer H, Nowack B, et al. Critical aspects of sample handling for direct nanoparticle analysis and analytical challenges using asymmetric field flow fractionation in a multi-detector approach. J Anal Atom Spectrom. 2012; 27(7): 1120-1130. https://doi.org/10.1039/c2ja30024a
- De la Calle I, Menta M, Seby F. Current trends and challenges in sample preparation for metallic nanoparticles analysis in daily products and environmental samples: A review. Spectrochim Acta B. 2016; 66-96.
- Nowack B, Bucheli TD. Occurrence, behavior and effects of nanoparticles in the environment. Environ Pollut. 2007; 150(1): 5-22. https://doi.org/10.1016/j.envpol.2007.06.006
- Hagendorfer H, Lorenz C, Kaegi R, Sinnet B, Gehrig R, Goetz NV, et al. Size-fractionated characterization and quantification of nanoparticle release rates from a consumer spray product containing engineered nanoparticles. J Nanopart Res. 2010; 12(7): 2481-2494. https://doi.org/10.1007/s11051-009-9816-6
- Steiling W, Bascompta M, Carthew P, Catalano G, Corea N, D'Haese A, et al. Principle considerations for the risk assessment of sprayed consumer products. Toxicol Lett. 2014; 227(1): 41-49. https://doi.org/10.1016/j.toxlet.2014.03.005
- Norgaard AW, Jensen KA, Janfelt C, Lauritsen FR, Clausen PA, Wolkoff P. Release of VOCs and particles during use of nanofilm spray products. Environ Sci Technol. 2009; 43(20): 7824-7830. https://doi.org/10.1021/es9019468
- Yoon CS. Consideration of nano-measurement strategy. Korean J Environ Health Sci. 2011; 37(1): 73-79. https://doi.org/10.5668/JEHS.2011.37.1.073
- Burtscher H, Baltensperger U, Bukowiecki N, Cohn P, Hüglin C, Mohr M, et al. Separation of volatile and non-volatile aerosol fractions by thermodesorption: instrumental development and applications. J Aerosol Sci. 2001; 32(4): 427-442. https://doi.org/10.1016/S0021-8502(00)00089-6
- National Institute for Public Health and the Environment (RIVM). Comparison of consumer exposure modelling tools. Available: https://core.ac.uk/download/pdf/58773368.pdf [accessed on 14 July 2019]
- Unitied States Environmental Protection Agency (USEPA). Predictive models and tools for screening chemicals under TSCA: Consumer Exposure Models 1.5. Available: https://www.epa.gov/tscascreening-tools/predictive-models-and-tools-screening-chemicals-under-tsca-consumer-exposure [accessed on 14 July 2019]
- Delmaar J, Bremmer H. The ConsExpo spray model-Modelling and experimental validation of the inhalation exposure of consumers to aerosols from spray cans and trigger sprays. RIVM Report No. 320104005. Bilthoven, the Netherlands: RIVM; 2010. p. 1-70.
- European Chemicals Agency (ECHA). Chapter R.15: Consumer exposure estimation., Ver.3.0. In Guidance on information requirements and chemical safety assessment. Helsinki, Finland: ECHA; 2016. p. 1-61.
- Riedmann R, Gasic B, Vernez D. Sensitivity analysis, dominant factors, and robustness of the ECETOC TRA v3, Stoffenmanager 4.5, and ART 1.5 occupational exposure models. Risk Anal. 2015; 35(2): 211-225. https://doi.org/10.1111/risa.12286
- Federal Institute for Occupational Safety and Health in Germany (BAuA). SprayExpo 2.0 Program description. 2016.
- European Chemicals Agency (ECHA). Chapter R.14: Occupational exposure assessment. Ver.3.0. In Guidance on information requirements and chemical safety assessment. Helsinki, Finland: ECHA; 2016. p. 1-49.
- National Institute for Public Health and the Environment (RIVM). About ConsExpo nano, a short introduction to the tool for consumer exposure to nanomaterials in consumer spray products. Available: https://www.rivm.nl/en/consexpo/related-tools/nano-tool/about [accessed on 14 July 2019]
- Park J, Yoon C, Lee K. Comparison of modeled estimates of inhalation exposure to aerosols during use of consumer spray products. Int J Hyg Env Health. 2018; 221(6): 941-950. https://doi.org/10.1016/j.ijheh.2018.05.005
- National Institute for Public Health and the Environment (RIVM) The ConsExpo spray model-Modelling and experimental validation of the inhalation exposure of consumers to aerosols from spray cans and trigger sprays. RIVM Report No. 320104005. Bilthoven, the Netherlands: RIVM; 2009. p. 1-70.